HITRON HDM09-12B-D15

H HiTRON
PCB-MOUNT DC-DC CONVERTER ENCAPSULATED MODULES
9 WATTS SINGLE & DUAL OUTPUT HDM09-S & HDM09-D SERIES
FEATURES:
LOW COST SINGLE & DUAL OUTPUT
2:1 INPUT RANGE
9W ISOLATED OUTPUT
SIX-SIDED METAL SHIELD
SPECIFICATION
INPUT SPECIFICATION
Input Range: 2:1 DC input range.
See Ratings Chart.
Input Voltage: Nominal 12/24/48 Vdc.
Input Current: Various with input range & load.
See Ratings Chart.
Input Fuse: Use external fuse.
Input Filter: Pi-Network.
Isolation Resistance: 1,000 Mega Ohms.
Isolation Voltage: 1,500Vdc.
EMI: Six-sided metal shielding.
OUTPUT SPECIFICATION
Output Voltage: See Ratings Chart.
Output Current: See Ratings Chart.
Voltage Accuracy: Main O/P ±2.0% typical.
Line Regulation: Various with output voltages. ±0.5% typ.
Load Regulation: Various with output voltages.
Single O/P ±1.0% typical.
Dual O/P ±2.0% typical.
Noise & Ripple: Typical 100mV for 3.3V/5.0V &
1.0% for others peak to peak.
OVP: Built-in on main output.
Adjustability: Not available.
Overload Protection (OLP):
Fully protected against output overload and short circuit.
Typical 120-150% max. load.
Consult the factory for special OLP setting.
GENERAL SPECIFICATION
Efficiency: 65-75% typical various with input.
Switching Frequency: 40-70K Hz., various with
input and loading condition.
Circuit Topology: Free Running Flyback Circuit.
Transient Response: Peak deviation 200mV.
Recovery time < 3mS for a 25% load change.
Case: Black coated steel with non-conductive
metal base.
Power Density: 5.6Watts. / Cubic inch.
MTBF: 1,000,000 hours. Mil Std 217, 25°C.
Operating Temperature: -10°C to +70°C range.
0°C to +60°C @ full load without derating.
From+60°C, derating lineally to half [email protected] +70°C.
(Refer to the Derating Chart).
Temperature: -20°C to +85°C.
Temperature Coefficient: ± 0.03% /°C.
Cooling: Convection cooling up to +60°C @ full load.
At least 100LFM moving air is recommended for
Full load > +60°C in a confined area.
Humidity: Up to 95%RH, Non-condensing.
Commercial Grade only.
NOTE: (1) All measurements are at nominal input, full load, and +25°C unless otherwise specified.
(2) Line Regulation measured from High to Low Lines at full load.
(3) Load Regulation measured from Full Load to 1/2 Full Load at nominal input.
(4) Correct fuse size by calculating the max. DC current drain at low Line input & Load and then adding 20-25% for the desired fuse size.
Due to requests in market and advances in technology, specifications subject to change without notice.
-19-
INPUT/ OUTPUT & VOLTAGE/ CURRENT RATINGS CHART
SINGLE OUTPUT
MODEL NO.
HDM09-12B-S03
HDM09-12B-S05
HDM09-12B-S09
HDM09-12B-S12
HDM09-12B-S15
HDM09-12B-S24
HDM09-24B-S03
HDM09-24B-S05
HDM09-24B-S09
HDM09-24B-S12
HDM09-24B-S15
HDM09-24B-S24
HDM09-48B-S03
HDM09-48B-S05
HDM09-48B-S09
HDM09-48B-S12
HDM09-48B-S15
HDM09-48B-S24
INPUT
Vdc
9.0- 18.0
9.0- 18.0
9.0- 18.0
9.0- 18.0
9.0- 18.0
9.0- 18.0
18.0- 36.0
18.0- 36.0
18.0- 36.0
18.0- 36.0
18.0- 36.0
18.0- 36.0
36.0- 72.0
36.0- 72.0
36.0- 72.0
36.0- 72.0
36.0- 72.0
36.0- 72.0
INPUT CURRENT
N. L. (mA)
F.L.
60
650
60
930
60
950
60
940
60
990
60
1060
35
325
35
465
35
475
35
470
35
495
35
530
20
163
20
233
20
238
20
235
20
247
20
265
OUTPUT ★
VO1(Vdc)
3.3V
5.0V
9.0V
12.0V
15.0V
24.0V
3.3V
5.0V
9.0V
12.0V
15.0V
24.0V
3.3V
5.0V
9.0V
12.0V
15.0V
24.0V
OUTPUT
VO1(A)
1.65A
1.65A
0.95A
0.70A
0.60A
0.40A
1.65A
1.65A
0.95A
0.70A
0.60A
0.40A
1.65A
1.65A
0.95A
0.70A
0.60A
0.40A
CASE
SIZE
DM2B
DM2B
DM2B
DM2B
DM2B
DM2B
DM2B
DM2B
DM2B
DM2B
DM2B
DM2B
DM2B
DM2B
DM2B
DM2B
DM2B
DM2B
DUAL OUTPUT
MODEL NO.
HDM09-12B-D05
HDM09-12B-D12
HDM09-12B-D15
HDM09-24B-D05
HDM09-24B-D12
HDM09-24B-D15
HDM09-48B-D05
HDM09-48B-D12
HDM09-48B-D15
INPUT
Vdc
9.0- 18.0
9.0- 18.0
9.0- 18.0
18.0- 36.0
18.0- 36.0
18.0- 36.0
36.0- 72.0
36.0- 72.0
36.0- 72.0
Symbols: "★" OVP built-in.
INPUT CURRENT
N. L. (mA) F.L.
50
960
50
970
50
990
30
480
30
485
30
495
20
240
20
243
20
248
OUTPUT (Vdc)
+VO1 ★
-VO2 ║
+5.0V
-5.0V
+12.0V
-12.0V
+15.0V
-15.0V
+5.0V
-5.0V
+12.0V
-12.0V
+15.0V
-15.0V
+5.0V
-5.0V
+12.0V
-12.0V
+15.0V
-15.0V
OUTPUT (A)
+VO1
-VO2
0.85A
0.85A
0.36A
0.36A
0.30A
0.30A
0.85A
0.85A
0.36A
0.36A
0.30A
0.30A
0.85A
0.85A
0.36A
0.36A
0.30A
0.30A
CASE
SIZE
DM2B
DM2B
DM2B
DM2B
DM2B
DM2B
DM2B
DM2B
DM2B
"║" Double Feedback.
MECHANICAL DIMENSIONS: MM [INCHES]
WEIGHT: 62.5g (2.2 Oz.)
PIN ASSIGNMENT
PIN NO.
PIN #1
PIN #2
PIN #3
PIN #4
PIN #5
SINGLE
-INPUT
+ INPUT
DC-COM
PO PIN
VO1
DUAL
-INPUT
+ INPUT
-VO2
DC-COM
+ VO1
DERATING CHART
CASE SIZE: DM2B
-20-