H HiTRON UNIVERSAL AC INPUT AC-DC INDUSTRIAL DIN-RAIL SINGLE OUTPUT 120 WATTS SWITCHING MODE POWER SUPPLIES HID125 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC SOURCES MEET UNIVERSAL SAFETY STANDARD INDUSTRIAL POWER SUPPLIES FOR SNAP-ON MOUNTING ON DIN-RAILS EMI MEET CISPR PUB. 22 & FCC CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION OUTPUT SPECIFICATION Input Voltage: Typ. 90-264Vac. Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: Typ. 120W continuous. Output Connector: M-T plug connector. Line Regulation: Typ. 0.1%. Load Regulation: Typ. ±1.0-2.0%. Noise & Ripple: Typ. 1% peak to peak. OVP: Built-in. (Latch). Adjustability: Available at VO1. LED Indicator: Output indicating. Overload Protection (OLP): Fully protected against output overload and short circuit. Typically set at 140% max. load. Consult the factory for special OLP setting. Input Connector: M-T plug connector. Input Frequency: 47-63Hz. Inrush Current: Typ. <30.5A @ 230Vac. Input Current: 1.56A @115Vac, 0.86A @230Vac. Dielectric Withstand: Meet IEC 60950-1. EMI: Meet CISPR EN 55022 & FCC B. No Load Operation: No damage. Hold-up Time: Typ. 13mS @115Vac / 86mS @230Vac. Earth Leakage: Typ. 0.65mA @230Vac. GENERAL SPECIFICATION Efficiency: Typ. 81-82%. Switching Frequency: Fixed frq.62K Hz. Circuit Topology: Fixed frequency flyback circuit. Transient Response: Peak transient 14mV and recovers within 2.93mS after 25% load change. Safety Standard: IEC 60950-1/UL 60950-1 Class I. Power Density: 2.0 Watts/ Cubic Inch. Industrial Grade UL 508. Operating Temperature: -10 to +70°C. Derating from +60 °C to +70°C by derating 2%/°C. Storage Temperature: -25 to +85°C. Temperature Coefficient: Typ. 0.03% /°C. Cooling: Convection cooling for Ta < +60°C. Moving air is request for Ta >+ 60°C full load operation. Construction format: Enclosure metal box with DIN-clips format. Note: Due to requests in market and advances in technology, specifications subject to change without notification. In application -37- OUTPUT VOLTAGE / CURRENT RATINGS CHART SINGLE OUTPUT MODEL NO. MAIN VO1 @ Typ. Volt. Peak HID125-S120100 10.0A 12.0V 12.0A HID125-S240050 5.0A 24.0V 6.0A HID125-S480025 2.5A 48.0V 3.0A Symbol: "@"Adjustable. " " OVP built-in . Remark: Peak load less than 60 sec. with duty cycle <10%. MECHANICAL DIMENSIONS: MM [INCHES] INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT ASSIGNMENT CNTR & PIN # AC-LINE P1-3(L) AC INPUT AC-NEUTRAL P1-2(N) AC-GROUND P1-1(G) SINGLE OUTPUT VO1 DC COM P2-3,4 P2-1,2 -38- WEIGHT: 715.0g(25.2 Oz.)