H HiTRON UNIVERSAL INPUT AC-DC PCB OPEN FRAME TRIPLE OUTPUT 6-8 WATTS INTERNAL SWITCHING POWER SUPPLIES HVI06 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC SOURCES COMPACT PCB OPEN FRAME FORMAT MEET UNIVERSAL SAFETY STANDARDS EMI MEET CISPR PUB. 22 & FCC CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION OUTPUT SPECIFICATION Input Voltage: Range Typ. 90-264Vac. Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: Typ. 6-8 watts. Output Connector: Molex 5045 (vertical). Line Regulation: Typ. 0.1%. Load Regulation: Main VO1 typ. ±1-2.0%. Aux. VO2 & VO3 typ. ±2% (P.R.). Noise & Ripple: Typ. 1.0% peak to peak. OVP: Built-in at all output VO1,VO2 & VO3. Adjustability: Available at main output VO1. Overload Protection (OLP): Fully protected against output overload and short circuit. Consult the factory for OLP setting. Rating 100 to 240Vac. Input Connector: Molex 5045 (vertical). Input Frequency: 47-63Hz. Inrush Current: ≤30.6A @230Vac. Input Current: Typ.0.16A @115Vac, 0.08A @ 230Vac. Dielectric Withstand: Meet IEC950. EMI: Meet CISPR PUB.22 & FCC Class B. Hold-up Time: Typ. 20mS @115Vac, 40mS @230Vac. Earth leakage: Typ. 0.2mA @230Vac. GENERAL SPECIFICATION Efficiency: Typ. 65%. Switching Frequency: Typ. 55K Hz at 115Vac. Circuit Topology: Free Running Flyback Circuit. Transient Response: Output voltage returns in less than 3mS following a 25% load change. Safety standard: IEC950/UL1950 Class II. Operating Temperature: 0 to +50°C. Storage Temperature: -20 to +85°C. Temperature Coefficient: Typ. 0.04% /°C. Cooling: Free air convection. Construction: PCB open frame format. Power Density: 0.85 Watts / Cubic Inch. In application -1- OUTPUT VOLTAGE/CURRENT RATINGS CHART TRIPLE OUTPUT MODEL NO. HVI06-T050CC HVI06-T033CC HVI06-T050II HVI06-T033II HVI06-T050DD Symbol: "★" OVP built-in. MAIN VO1@★ Typ. 1.0A 1.5A 1.0A 1.5A 1.0A Volt. +5.0V +3.3V +5.0V +3.3V +5.0V "@" Adjustable. Max. 2.0A 2.5A 2.0A 2.5A 2.0A AUX. VO2 ★● Typ. 0.1A 0.1A 0.2A 0.2A 0.3A Volt. +2.5V +2.5V +12.0V +12.0V +3.3V Max. 1.0A 1.0A 1.0A 1.0A 1.0A AUX. VO3 ★● Typ. 0.1A 0.1A 0.1A 0.1A 0.3A Volt. -2.5V -2.5V -12.0V -12.0V -3.3V Max. 1.0A 1.0A 1.0A 1.0A 1.0A "●" Installed with Post Regulator (P.R.). Remark (1) At least 20% of typical main output current is required to maintain stated regulations. (2) Max. current can't be drawn from all output at the same time. MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: 75.0g (2.65 Oz.) INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT AC INPUT ASSIGNMENT AC-LINE AC-NEUTRAL VO1 CON3-4 (N) CON1-1, 4 CNTR & PIN # CON3-1 (L) Mating connector: Molex 5051 series or equivalent VO2 CON2-3 -2- TRIPLE OUTPUT VO3 RETURN CON2-1 CON2-2 DC COM CON1-2, 3