HITRON HVI51-31

H HiTRON
UNIVERSAL INPUT AC-DC MULTI-OUTPUT 51 WATTS
INTERNAL SWITCHING POWER SUPPLIES HVI51 SERIES
FEATURES:
ACCOMMODATE UNIVERSAL AC SOURCES
EXTRA LOW PROFILE OPEN FRAME
MEET UNIVERSAL SAFETY STANDARDS
EMI MEET CISPR PUB. 22 & FCC CLASS B
CE MARKING COMPLIANCE
SPECIFICATION
INPUT SPECIFICATION
OUTPUT SPECIFICATION
Input Voltage: Range 90-264Vac.
Output Voltage: See Ratings Chart.
Output Current: See Ratings Chart.
Output Connector: Molex 5273(vertical).
Output Wattage: Typ. 51 Watts.
Line Regulation: Typ. 0.1%.
Load Regulation: Main VO1 typ. ±1.0 %
Aux. VO2 & VO3 typ. ±2.0 %. (P.R.)
Noise & Ripple: Typ. 1.0% peak to peak.
OVP: Built-in at main VO1.
Adjustability: Available for VO1.
Overload Protection (OLP):
Fully protected against output overload and short circuit.
OLP set at about 125-150% rating output wattage.
Consult the factory for OLP setting.
Rating 100 to 240Vac.
Input Connector: Molex 5273.
Input Frequency: 47-63Hz.
Inrush Current: ≤30.6A at 230Vac.
Input Current: Typ. 1.3A @115Vac, 0.65A @230Vac.
Dielectric Withstand: Meet IEC 60950-1.
EMI: Meet CISPR PUB. 22 & FCC B.
Hold-up Time: Typ. 10mS @115Vac, 50mS @230Vac.
Earth Leakage: Less than 0.5mA @ 230Vac.
GENERAL SPECIFICATION
Efficiency: Typ. 70%.
Switching Frequency: Fixed frequency 70K Hz.
Circuit Topology: Fixed frequency flyback circuit.
Transient Response: Output voltage returns in
less than 3mS following a
25% load change.
Safety Standard: UL 60950-1/EN 60950-1 Class I.
Operating Temperature: 0 to +50°C.
Storage Temperature: -20 to +85°C.
Temperature Coefficient: Typ. 0.03% /°C.
Cooling: Free air convection cooling.
Construction format: L-Bracket format.
Power Density: 2.16Watts /Cubic Inch.
Note: Due to requests in market and advances in technology, specifications subject to change without notification.
In application
-19-
OUTPUT VOLTAGE / CURRENT RATINGS CHART
DUAL OUTPUT
MODEL NO.
HVI51-29
HVI51-29n
HVI51-20
HVI51-21
HVI51-21n
HVI51-22
HVI51-22n
HVI51-23
MAIN VO1 @
Typ.
Volt.
9.0A
+3V
9.0A
+3V
8.0A
+5V
8.0A
+5V
8.0A
+5V
8.0A
+5V
8.0A
+5V
8.0A
+5V
AUX.+VO2 or -VO3
Typ.
Volt.
1.8A
+12.0V
0.9A
-12.0V
1.0A
-5.0V
1.5A
+12.0V
0.9A
-12.0V
1.2A
+15.0V
0.8A
-15.0V
0.8A
+24.0V
TRIPLE OUTPUT
MODEL NO.
HVI51-39
HVI51-30
HVI51-31
HVI51-32
HVI51-33
MAIN VO1 @
Typ.
Volt.
8.0A
3.0V
6.0A
5.0V
6.0A
5.0V
6.0A
5.0V
6.0A
5.0V
AUX. +VO2
Typ.
1.6A
1.5A
1.5A
0.8A
1.2A
or †
Volt.
+12.0V
+12.0V
+12.0V
+24.0V
+15.0V
AUX. -VO3
Typ.
Volt.
0.6A
-12.0V
0.5A
-12.0V
1.0A
-5.0V
0.5A
-12.0V
0.5A
-15.0V
Symbol:" " OVP built-in. "@" Adjustable. "†" Stacked on main O/P. " " Installed with Post Regulator (P.R.).
MECHANICAL DIMENSIONS: MM [INCHES]
WEIGHT: L-B 374.0g (13.2 Oz.)
INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT
AC INPUT
ASSIGNMENT AC-LINE AC-NEUTRAL AC-GROUND
P1-L
P1-N
P1-G
CNTR & PIN#
Mating connector: P1 Molex 5195 or 5239 series.
P2 Molex 5195 or 5239 series.
VO1
P2-1,2
-20-
DUAL/TRIPLE OUTPUT
VO2
VO3
P2-7
P2-5
DC COM
P2-3,4,6