VER：2.1 Absolute Pressure Sensor (0-10 BAR) ● 0 to 1000kPa pressure range 10 bar or 150PSI) ● Absolute pressure sensor ● Silicon/Grass Bonding wafer, high stability ● Miniature surface mount ● RoHS-compatible & Pb-free ● Provide the other gage pressure range sensor DESCRIPTION The Series of pressure sensor is a silicon micro-machined membrane, piezo-resistive sensor. They were designed for extremely cost sensitive applications where the sensing element is to be integral to the OEM equipment, and are intended for use with non-corrosive, non-ionic media. They also may be packaged with application specific sensor die so that the performance characteristics and output range also can be identified. FEATURES ● Uncompensated pressure sensor ● Temperature Range -40°C ~ +125°C ● Low Cost, High reliability APPLICATION ● For high resolution absolute sensor systems ● Engine Controls ● Barometers, Altimeters, Variometers Full Scale Pressure kPa bar mbar PSI atm mmHg mmH2O kg/cm2 100 1 1000 15 1 750 10207 1 Part number System Pressure type H S F 1000-JK Package Pressure range Tel: +86-755-82973805 Fax: +86-755-82973550 E-mail: [email protected] http://www.hoperf.cn VER：2.1 Characteristics Workingconditions:DC@5v,Pressure1000KP,temperature 25 ℃ , humidity at 30% -90% 最小值 标准值 最大值 单位 项目 Pressure range 150PSI Supply voltage 0 5.0 10.0 Volts Currency 0 1.0 3.0 mA Span 60 100 140 mV Offset -30 0 30 mV Temperture cofficient -16 -22 -28 %FS/100℃ Temperture coefficient of zero -4 -6 -8 %FS/100℃ Nonlinearity 0 0.1 0.5 %F.S Bridge resistance 4 5 5 KΩ 2× 满量程 Proof pressure Operating temperature -40 125 ℃ Storage temperature -40 125 ℃ WAFER ELECTRICAL CONNECTIONS 1. Best fit straight line. 2. Coefficients are typical values between -10℃ and 40℃. Pin Configuration 6 1 PAD 1 Tel: +86-755-82973805 2 Fax: +86-755-82973550 3 4 5 6 E-mail: [email protected] http://www.hoperf.cn VER：2.1 Definition NC VO- VO+ NC VCC GND FR4 Package Outlines This document may contain preliminary information and is subject to change by Hope Microelectronics without notice. Hope Microelectronics assumes no responsibility or liability for any use of the information contained herein. Nothing in this document shall operate as an express HOPE MICROELECTRONICS CO.,LTD or implied license or indemnity under the intellectual property rights of 4/F, Block B3, East Industrial Area, Hope Microelectronics or third parties. The products described in this Huaqiaocheng, Shenzhen, Guangdong, document are not intended for use in implantation or other direct life China support applications where malfunction may result in the direct physical Tel: harm or injury to persons. NO WARRANTIES OF ANY KIND, 86-755-82973805 Fax: Email: INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 86-755-82973550 MECHANTABILITY OR FITNESS FOR A ARTICULAR PURPOSE, ARE [email protected] Website: http://www.hoperf.com OFFERED IN THIS DOCUMENT. http://www.hoperf.cn http://hoperf.en.alibaba.com Tel: +86-755-82973805 ©2006, HOPE MICROELECTRONICS CO.,LTD. All rights reserved. Fax: +86-755-82973550 E-mail: [email protected] http://www.hoperf.cn