ALG01 ALARM GENERATOR TO MONITOR THE FUNCTION OF CPU-COOLER AND FANS WITH PULSE OUTPUT FEATURES • • • • • • ® ® Suitable for all SEPA DC-fans and SEPA CPU-Cooler with pulse output Generates an acoustic sound in case fan fails (missing pulses) The alarm will be generated permanently, even if the fan starts after blocking False pole protection included No stand-by current consumption Very small size TECHNICAL PERFORMANCE Operating voltage: Stand-by current/alarm current: Sound frequency: Sound level: Function: Reset: 4.5 to 15.0VDC 0 /17 mA 4 ± 0.5 KHz >83dB/10cm @ 12VDC In case of missing or very low frequency pulses an acoustic signal will be generated (the sound level varies by the operating voltage). After eliminating the failure the acoustic signal stops after reset only. Switch off power supply for 30 seconds. Soldering side 16 8 3.2 Diameter for mounting 8mm max. IN OUT 25 3 9.5 max 51 max ORDER INFORMATION: ALG01PCB ALG01ZLT ALG01FDD 11/03 Alarm generator, electronic only Alarm generator with lead wires 2 x AWG26, blk, red Alarm generator with lead wires and connector (FDD) BPKZ1010 auf Anfrage auf Anfrage Technical changes without notice D E L T A C O M P O N E N T S GmbH ž Auweg 27 ž D-79761 Waldshut-Tiengen ž Tel.: +49/7751/8399-0 ž Fax: +49/7751/8399-99 www.DeltaCar-PC.de www.delta-components.de E - mail: [email protected]