Technical Information XU 66129.00 Developmental Monolayer Adhesive Film pre-applied to foam-backed fabrics and reactivated to bond to substrates in molding operations. This film is a high flow adhesive that is useful for bonding substrates while opening up for breathability and adding stiffness to the final part. XU 66129.00 Developmental Monolayer Adhesive Film is a heat-activated, thermally stable adhesive film capable of bonding to urethane foam-backed fabrics, paper, fiberglass, nonwovens, and rigid urethanes. This thermally activated adhesive film can be Physical Properties Heat activation point: 266°F (130°C) Yield: 204 (sq ft/lb/mil) (41 m2/kg/25 µm) Available colors: Clear Gauge range: 1.5-4.0 mil (37.5-102 µm) Width range: 20-75 in (508-1905 mm) Test Method Imperial Values @ 2.0 mil(1) Metric Values Ultimate Tensile MD TD ASTM D 882 3400 psi 2600 psi 23 N/mm2 18 N/mm2 Ultimate Elongation MD TD ASTM D 882 610 % 560 % 610 % 560 % Tensile Modulus, 2% Secant MD TD ASTM D 882 49,000 psi 67,000 psi 338 N/mm2 462 N/mm2 Elmendorf Tear MD TD ASTM D 1922 20 g/mil 80 g/mil 1 g/µm 3 g/µm (1)Values are averages of typical film; not to be construed as specifications. – See “Handling Considerations” reverse side. *Trademark of The Dow Chemical Company. Form No. 299-50172-0801 SMG WWW.ALLDATASHEET.COM Copyright © Each Manufacturing Company. All Datasheets cannot be modified without permission. This datasheet has been download from : www.AllDataSheet.com 100% Free DataSheet Search Site. Free Download. No Register. Fast Search System. www.AllDataSheet.com