C18ST OSCILLATOR Specifications Parameters Standard Options Frequency range 1,000 MHz - 160,0 MHz Logic output Clipped sinewave Sinewave Frequency stability Overall Initial at 25°C Temperature vs supply voltage change vs load change Aging first year Aging over …. Years Operating temperature +- 3,0 ppm +-1,0 ppm best possible Please specify 0° C ~ +70°C -20°C ~ +70°C -40°C ~ +85°C Storage temperature -40°C ~ +85°C Other on custom request -55°C ~ +125°C Supply voltage 3,3 V +-5% 5,0 V ± 5% Other on custom request Current 2,0 mA max Load 10 Kohm // 10 pF Other on custom request Jitter ( 12kHz ~ 20,0 MHz ) 3-4 ps typ. Other on custom request Phase noise Harmonics Sub-harmonics Start-up time Please specify ( if required ) 10 ms max. Other on custom request Frequency trimming range with externally adjustable trimmer ± 3 ppm min. other Marking Freq + Code + Week +Year HM International Demer 26 B-2230 Herselt BELGIUM Tel. +32(0)14548955 Fax. +32(0)14549443 email : [email protected] www.hminternational.be 1 C18ST OSCILLATOR Specifications Voltage Control Options External control voltage + 1,65 VDC ±1,65 VDC (3,3V) Other on custom request +2,5 VDC ±2,5 VDC (5,0V) Linearity ± 10% max. Other on custom request Frequency tuning range ± 10 ppm Other on custom request Pulling slope Positive Other on custom request Drawing Options Package T183C with hole Pin configuration #1 : NC / Vco #2 : GND #3 : Output #4 : Vcc HM International Demer 26 B-2230 Herselt BELGIUM Tel. +32(0)14548955 Fax. +32(0)14549443 email : [email protected] www.hminternational.be 2