ETC IP568X

IP568x
56K V.90 Modem Single Chip
Features
General Description
„ Data mode capabilities:
− ITU-T V.90
− ITU-T V.34
− ITU-T V.32bis, V.32
− ITU-T V.22bis,V.22
− ITU-T V.23, V.21
− Bell 212
− Bell 103
„ FAX mode capabilities:
The Modem Chip IP568x is a highly integrated, low-cost,
high performance, low-power, a full-function modem
solution. IP568x implements V.90 to achieve Internet
connection rates up to 56Kbps, supporting existing V.34
data mode, video-ready interface, Class 1 FAX, TAM
(Telephone Answer Machine) and Speakerphone
functions. IP568x’s I/O pins allow designer to easily
control DAA or design modem for special application.
IP568x is a µDSP-based chip designed specifically for
modem application, and it performs high MIPS
operations such as V.90, V.34 and V.32 modulation.
IP568x provides a serial interface for connecting to
codec. IP568x uses high quality design to optimize
modem configuration for line condition and provide
reliable connection with connection rate ranging from
300bps up to 56Kbps. IP568x is the best choice for
designing a modem.
− ITU-T V.17, V.29, V.27ter, and V.21 Ch 2
− TIA/EIA 578 class 1 FAX
„ Enhanced voice features:
−Telephone answering machine (TAM)
−Real Audio, 8 bits PCM
−Speakerphone (Option)
„ Caller identification (caller ID)
„ V.42 error correction (LAPM and MNP)
„ V.42bis and MNP class 5 data compression
„ V.44 data compression
„ World wide call progress tone detection
„ ITU V.24, RS-232C serial interface
„ Operating system support: DOS, Windows 95,
Windows 98, and Windows NT, Windows ME,
Windows 2000, and Windows XP
„ IS-101 AT+V commands with extensions
„ TIA/EIA 602 standard for AT command set
„ DTE speed up to 115200
„ I/O port for homologation and specific application
„ Support power down mode
„ Fully software upgradeable (need external flash
memory)
Application
„
„
„
„
„
Standalone Modem
Embedded Modem Module
Network Computer
Set-top Box
Video Phone
Order Information
103
104
105
106
107
108
109
112
111
110
115
114
113
118
117
116
121
120
119
124
123
122
127
126
56K V.90 Modem Single Chip
125
IP568x:
128
„
1
102
2
101
3
100
4
99
5
98
97
6
7
96
8
95
9
94
10
93
11
92
12
91
90
13
89
14
88
15
87
16
86
17
18
85
19
84
20
83
21
82
81
22
80
23
79
24
78
25
77
26
76
27
75
28
74
29
64
63
62
61
58
60
59
55
56
57
52
53
54
50
51
49
65
48
66
38
46
67
37
47
36
43
68
44
69
35
45
70
34
40
33
41
71
42
73
72
32
39
30
31
IP568x 128Pin LQFP
System Block Diagram
IP568x
RS-232C
Interface
External
Memory
Interface
(Option)
µDSP
RS-232C
Interface
Internal
Memory
Memory
Interface
I/O Logic
Σ−∆
A/D,D/A
Converter
Tx
Rx
Speaker
PLL1
PLL2
I/O Port
Preliminary, Specification subject to change without notice
IP568x-DS-P05, Nov, 2002
Copyright@2002, IC ACE Corp.
1
Tel: 886-2-26961080
Fax: 886-2-26961085
Email: [email protected]
IP568x
56K V.90 Modem Single Chip
PIN Assignments
Preliminary, Specification subject to change without notice
IP568x-DS-P05, Nov, 2002
Copyright@2002, IC ACE Corp.
2
Tel: 886-2-26961080
Fax: 886-2-26961085
Email: [email protected]
IP568x
56K V.90 Modem Single Chip
PIN Description
Pin No.
1
13
18
19
21
33
35
36
37
38
40
41
42
43
44
48
Symbol
/DTR
/RXD
/TXD
/CODRST
T1
/RTS
/DSR
/CTS
/MRLED
/TRLED
/DCD
/AALED
/HSLED
/RI
/OH
/FLHWR
I/O
I
I
O
O
I
I
O
O
O
O
O
O
O
I
O
O
49
50
52-55, 57-62,65-72
76
77
80
78
81
83-90
92-93,100-105
95
96
106
/PSEN
EXT/INT_ROM
HA0-HA17
DT0
DR0
FS0
SCLK
CODECLK
HD0-HD7
Out[7:0]
OSCI
OSCO
/LCS
O
I
O
O
I
I
I
O
I/O
O
I
O
I
107
108
109
115
119
94
97
12,45,63,75,91,113
8,17,25,30,39,46,56,
64,73,79,98,124
EEDATA
EESK
EECS
/RESET
VOUTR
AGND
AVDD3.3
VDD2.5V
GND
I/O
O
O
I
O
P
P
P
P
Description
RS232 DTR signal
RS232 data input and TD LED
Data output to RS232 and RD LED
Codec Reset
Connect with pin 13
RS232 RTS signal
RS232 DSR signal
RS232 CTS signal
MR LED pin
DTR LED pin
DCD
AA LED pin
HS LED pin
Telephone interface ring input
Hook relay control (P1.2)
IP568x flash memory write enable
If program memory is not flash memory, this pin is an NC pin
IP568x program strobe enable
For external ROM or internal ROM selection
Host Address bus of IP568x
SP1 Transmit Data Output pin
SP1 Receive Data Input pin
SP1 Frame signal
Reference Clock for SP1 and SP2
Codec Clock
Host Data bus of IP568x
Output port 0 – 7
Oscillator input. It accepts either a crystal or an external TTL driver.
Oscillator output
Line loop current detection
Input port (address:bit0 of F400H)
NVRAM serial data port
NVRAM clock input
NVRAM chip select
Reset pin, 3.3V input only
Regulator control output
For PLL and oscillator
For PLL and oscillator ( 3.3V )
+2.5V power supply
Digital ground
Preliminary, Specification subject to change without notice
IP568x-DS-P05, Nov, 2002
Copyright@2002, IC ACE Corp.
3
Tel: 886-2-26961080
Fax: 886-2-26961085
Email: [email protected]
IP568x
56K V.90 Modem Single Chip
PIN Description
Pin No.
14,15,24,47,82,99,
116,117,118
2-7,9-11,16,20,22,23,
26-29,31,32,34,51,74
,110-112,114,120-123
,125-128
Symbol
VDD3.3V
NC
I/O
P
Description
+3.3V power supply
These pins are for testing and must be floated in application.
Table 1. IP568x Pin Description
System Configuration
ATxxxx
(Issue Download command)
Ready
(Modem response “Ready”)
Send ASCII File (Choose send ASCII file in
communication software & send
new code to modem)
Wait moment
(download program)
.
.
(Waiting)
.
OK
(When download procedure is
complete, modem will response
OK.)
a. Power Down Mode
Host can instruct modem system to enter power down
mode by “AT*P” command. There are two ways to wake
µDSP.
(1) Power off then power on modem
(2) Negative pulse is occurred at input pins “RI\” of
IP568x
b. Re-flash Program Memory (Download New code)
By setting C0H.0 (reset state: 0), system can switch
program and data memory. If system uses FLASH
memory as program memory, we can use this function to
replace program code by loading download program to
data memory then swapping external data memory and
external program memory.
For example,
SETB C0H,0
LJMP 0000H
In this modem system, modem provides a AT command
for download function. When users get new code and
want to upgrade current program code, the following
procedure can be used:
Preliminary, Specification subject to change without notice
IP568x-DS-P05, Nov, 2002
Copyright@2002, IC ACE Corp.
Note: When modem is in download mode, don’t turn off
power.
c. DAA (Data Access Arrangement) & NCU (network
Control Unit)
The modem chip provides standard serial interface for
Codec. IP568x can support traditional code plus
transformer-based NCU circuit and advance silicon DAA.
For further information, please contact technical
supporting engineer.
d. AT command
IP568x modem supports Data, Fax and Voice function.
All functions are controlled by AT command.
IC ACE will provide source code of AT command part
for customer modification. Please refer to the
document “ User’s Manual & AT command set”.
4
Tel: 886-2-26961080
Fax: 886-2-26961085
Email: [email protected]
IP568x
56K V.90 Modem Single Chip
e. V.44
V.44
New compression scheme that compresses HTML text
for faster web downloads.
IP568x has already combined the V.44 function into its
internal ROM. That means, IP568x don’t need to add any
extra components for this advance function.
Electrical Characteristic
Absolute Maximum Rating
Power supply voltage
Operating temperature under bias
Storage temperature
Applied voltage on any pin
-0.5V to 7.0V
0℃ to 70℃
-65℃ to 150℃
-0.5V≦VIN≦VDD+0.5V
DC Electrical Characteristics
(AVDD3.3V=3.3V±5%, VDD3.3V=3.3V±5% VDD2.5V=2.5V±5%GND=0V, TA=0℃ to 70℃)
Symbol
Min.
Typ.
Max.
Parameter
Unit
VDD3.3V
Operation Voltage
3.3-5%
3.3
3.3+5%
V
VDD2.5V
Operation Voltage
2.5-5%
2.5
2.5+5%
V
AVDD3.3V
Operation Voltage
3.3-5%
3.3
3.3+5%
V
IDD
Operation Current
TBD
mA
VIH
Input High Voltage
2.0
V
VIL
Input Low Voltage
+0.8
V
ILI
Input Leakage
-10
10
uA
VOH
Output High Voltage
2.4
V
VOL
Output Low Voltage
+0.4
V
CIN
Input Capacitance
10.0
pF
VILRESET
Reset Schmitt VIL
1.3
V
VIHRESET
Reset Schmitt VIH
2.0
V
Conditions
VIN =0, 3.3V+5%
IOH=-0.5mA
IOL=1.5mA
Order Information
Part No.
PIN
Notice
IP568x
128 PIN LQFP
External Modem
Preliminary, Specification subject to change without notice
IP568x-DS-P05, Nov, 2002
Copyright@2002, IC ACE Corp.
5
Tel: 886-2-26961080
Fax: 886-2-26961085
Email: [email protected]
IP568x
56K V.90 Modem Single Chip
Package Detail
(128-pin LQFP Outline Dimensions)
Preliminary, Specification subject to change without notice
IP568x-DS-P05, Nov, 2002
Copyright@2002, IC ACE Corp.
6
Tel: 886-2-26961080
Fax: 886-2-26961085
Email: [email protected]