ETC PE7744DEW

PE77D Series 2.5 V
PECL Clock Oscillators
October 2006
• Pletronics’ PE77D Series is a quartz crystal
controlled precision square wave generator
with a PECL output.
• The package is designed for high density
surface mount designs.
• Low cost mass produced oscillator.
• Tape and Reel or Tube packaging is available.
•
•
•
•
40 to 250 MHz
5 x 7 mm LCC Ceramic Package
Enable/Disable Function on pad 1
Disable function includes low standby power
mode
• 3rd Overtone Crystals used
• Improved circuit to minimize oscillator issues
such as multi-mode output signal.
• Low Jitter
Pletronics Inc. certifies this device is in accordance with the
RoHS 6/6 (2002/95/EC) and WEEE (2002/96/EC) directives.
Pletronics Inc. guarantees the device does not contain the following:
Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s
Weight of the Device: 0.16 grams
Moisture Sensitivity Level: 1 As defined in J-STD-020C
Second Level Interconnect code: e4
Absolute Maximum Ratings:
Parameter
Unit
VCC Supply Voltage
-0.5V to +7.0V
Vi
Input Voltage
-0.5V to VCC + 0.5V
Vo
Output Voltage
-0.5V to VCC + 0.5V
Thermal Characteristics
The maximum die or junction temperature is 155oC
The thermal resistance junction to board is 30 to 50oC/Watt depending on the solder pads, ground plane
and construction of the PCB.
Product information is current as of publication date. The product conforms
to specifications per the terms of the Pletronics standard warranty. Production
processsing does not necessarily include testing of all parameters.
Copyright © 2006, Pletronics Inc.
PE77D Series 2.5 V
PECL Clock Oscillators
October 2006
Part Number:
PE77
45
D
E
W
-125.0M
-XX
Part Marking:
PLE PE77
FF.FFF M
C YMDXX
Packaging code or blank
T250 = 250 per Tape and Reel
T500 = 500 per Tape and Reel
T1K = 1000 per Tape and Reel
or
Frequency in MHz
PE7XYWWXX
FF.FFF M
C PLE XXX
Supply Voltage VCC
W = 2.5V _
+ 10%
Optional Enhanced OTR
E = Temperature range -40 to +85oC
Series Model
Frequency Stability
45 = _
+ 50 ppm
44 = _
+ 25 ppm
20 = _
+ 20 ppm
Series Model
Marking Legend:
PLE = Pletronics
FF.FFF M = Frequency in MHz
YYWW or YWW or YMD = Date of Manufacture (year and week, or year-month-day)
All other marking is internal factory codes
Specifications such as frequency stability, supply voltage and operating temperature range, etc. are
not identified from the marking. External packaging labels and packing list will correctly identify the
ordered Pletronics part number.
Codes for Date Code YMD
Code
Year
6
2006
Code
A
JAN
Month
Code
Day
Code
Day
Code
Day
7
2007
8
2008
B
FEB
9
2009
C
MAR
D
APR
0
2010
E
MAY
F
JUN
1
2011
2
2012
G
JUL
H
AUG
J
SEP
K
OCT
L
NOV
M
DEC
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
A
10
B
11
C
12
D
13
E
14
F
15
G
16
H
17
J
18
K
19
L
20
M
21
N
22
P
23
R
24
T
25
U
26
V
27
W
28
X
29
Y
30
Z
31
www.pletronics.com
425-776-1880
2
PE77D Series 2.5 V
PECL Clock Oscillators
October 2006
Electrical Specification for 2.50V +
_5% over the specified temperature range
Item
Min
Max
Unit
Condition
Frequency Range
40
250
MHz
Frequency Accuracy “45"
-50
+50
ppm
“44"
-25
+25
For all supply voltages, load changes, aging for 1
year, shock, vibration and temperatures
“20"
-20
+20
Output Waveform
PECL /ECL
o
o
Output High Level (0 C to 85 C)
Output High Level (-40oC)
o
o
Output Low Level (0 C to 85 C)
Output Low Level (-40oC)
Output Symmetry
Jitter
1.475
1.760
volts
Referenced to Ground, VCC = 2.5 V
0.975
1.260
volts
Referenced to termination voltage, VCC = 2.5 V
-1.025 -0.740
volts
Referenced to Vcc, VCC = 2.5 V
1.415
1.620
volts
Referenced to Ground, VCC = 2.5 V
0.915
1.12
volts
Referenced to termination voltage, VCC = 2.5 V
-1.085
-0.88
volts
Referenced to Vcc, VCC = 2.5 V
0.690
1.095
volts
Referenced to Ground, VCC = 2.5 V
0.190
0.595
volts
Referenced to termination voltage, VCC = 2.5 V
-1.810 -1.405
volts
Referenced to Vcc, VCC = 2.5 V
0.670
1.195
volts
Referenced to Ground, VCC = 2.5 V
0.170
0.695
volts
Referenced to termination voltage, VCC = 2.5 V
-1.830 -1.305
volts
Referenced to Vcc, VCC = 2.5 V
45
55
%
-
0.6
pS RMS
at 50% point of VCC
12 KHz to 20 MHz from the output frequency
-
2.8
pS RMS
Output TRISE and TFALL
-
0.7
nS
VCC Supply Current (ICC)
-
90
mA
50
-
Kohm
to VCC
-
0.6
volts
Referenced to pad 3
Referenced to pad 3
Enable/Disable Internal Pull-up
V disable
V enable
(See load circuit)
10 Hz to 1 MHz from the output frequency
Vth is 20% and 80% of waveform
1.7
-
volts
-10
+10
uA
-10
+10
uA
Enable time
-
10
nS
Time for output to reach a logic state
Disable time
-
10
nS
Time for output to reach a high Z state
mS
Output leakage
VOUT = VCC
VOUT = 0V
Pad 1 low, device disabled
Start up time
-
10
Operating Temperature Range
0
+70
o
Standard Temperature Range
- 40
+85
o
Extended Temperature Range
-55
+125
o
-
3
Storage Temperature Range
Standby Current ICC
C
C
Time for output to reach specified frequency
“E” Option
C
uA
Pad 1 low, device disabled
Specifications with Pad 1 E/D open circuit
www.pletronics.com
425-776-1880
3
PE77D Series 2.5 V
PECL Clock Oscillators
October 2006
Typical Phase-Noise Response
0
-20
dBc/Hz
-40
-60
-80
-100
-120
-140
-160
10
1,000
100,000
10,000,000
Frequency (Hz)
Load Circuit
Test Waveform
Symmetry
Vhigh
Out
80%
50%
20%
Out*
Vlow
Trise
Tfall
Showing Out Measurement only
www.pletronics.com
425-776-1880
4
PE77D Series 2.5 V
PECL Clock Oscillators
October 2006
Reliability: Environmental Compliance
Parameter
Condition
Mechanical Shock
MIL-STD-883 Method 2002, Condition B
Vibration
MIL-STD-883 Method 2007, Condition A
Solderability
MIL-STD-883 Method 2003
Thermal Shock
MIL-STD-883 Method 1011, Condition A
ESD Rating
Model
Minimum Voltage
Conditions
Human Body Model
1500
MIL-STD-883 Method 3115
Charged Device Model
1000
JESD 22-C101
Package Labeling
Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Courier New
Bar code is 39-Full ASCII
www.pletronics.com
Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Arial
425-776-1880
5
PE77D Series 2.5 V
PECL Clock Oscillators
October 2006
Mechanical:
Inches
A
0.276 +
_0.006
7.00 +
_0.15
B
0.197 +
_0.006
5.00 +
_0.15
C
Contacts:
Gold 11.8 μinches 0.3 μm minimum over
Nickel 50 to 350 μinches 1.27 to 8.89 μm
Pad
1
Typical dimensions
Not to Scale
mm
0.067 max
1.70 max
1
D
0.038
0.96
E1
0.200
5.08
F1
0.004
0.10
G1
0.050
1.27
H1
0.055
1.40
I1
0.024
0.60
J1
0.004R
0.10R
K1
0.008R
0.20R
Function
Note
1
Output
Enable/Disable
When this pad is not connected the oscillator shall operate.
When this pad is <0.30 volts, the output will be inhibited (high impedance state.)
Recommend connecting this pad to VCC if the oscillator is to be always on.
2
No connect
There is no internal connection to this pad
3
Ground (GND)
4
Output
5
Output*
6
Supply Voltage
(VCC)
Both outputs must be terminated and biased for proper operation. The ideal
termination is 50 ohms connected to 2.0V below the Supply Voltage.
Recommend connecting appropriate power supply bypass capacitors as close as
possible.
Layout and application information
Recommend connecting Pad 1 and Pad 2 together to permit the design to accept Enable/Disable input on
either pad
For Optimum Jitter Performance, Pletronics recommends:
•
a ground plane under the device
•
no large transient signals (both current and voltage) should be routed under the device
•
do not layout near a large magnetic field such as a high frequency switching power supply
•
do not place near piezoelectric buzzers or mechanical fans.
www.pletronics.com
425-776-1880
6
PE77D Series 2.5 V
PECL Clock Oscillators
October 2006
Reflow Cycle (typical for lead free processing)
260°C Maximum
10 Seconds Maximum
Temperature (°C)
250
215°C±10°C
200
175°C±10°C
150
100
Approximately 50 Seconds
120 to 160 Seconds
Allowed rate of temperature change
Maximum 4°C per second
The part may be reflowed 2 times without degradation.
Tape and Reel: available for quantities of 250 to 1000 per reel
Constant Dimensions Table 1
Tape
Size
D0
8mm
D1
Min
E1
P0
1.0
12mm
1.5
16mm
+0.1
-0.0
24mm
P2
S1
Min
T
Max
0.6
0.6
T1
Max
2.0
+0.05
_
1.5
1.75
4.0
1.5
_
+0.1
_0.1
+
0.1
2.0
_
+0.1
1.5
Variable Dimensions Table 2
Tape
Size
B1
Max
E2 Min
F
P1
T2
Max
W
Max
Ao, Bo &
Ko
16 mm
12.1
14.25
7.5 +
_0.1
8.0 +
_0.1
8.0
16.3
Note 1
Note 1: Embossed cavity to conform to EIA-481-B
Dimensions in mm
Not to scale
REEL DIMENSIONS
A
B
inches
7.0
10.0
13.0
mm
177.8
254.0
330.2
inches
2.50
4.00
3.75
mm
63.5
101.6
95.3
Tape
Width
16.4
+2.0
-0.0
16.0
C
mm
D
mm
13.0 +0.5 / -0.2
16.4
+2.0
-0.0
16.4
+2.0
-0.0
Reel dimensions may vary from the above
www.pletronics.com
425-776-1880
7
PE77D Series 2.5 V
PECL Clock Oscillators
October 2006
IMPORTANT NOTICE
Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and
other changes to this product at anytime. PLE reserves the right to discontinue any product or service
without notice. Customers are responsible for obtaining the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to
PLE’s terms and conditions of sale supplied at the time of order acknowledgment.
PLE warrants performance of this product to the specifications applicable at the time of sale in accordance
with PLE’s limited warranty. Testing and other quality control techniques are used to the extent PLE
deems necessary to support this warranty. Except where mandated by specific contractual documents,
testing of all parameters of each product is not necessarily performed.
PLE assumes no liability for application assistance or customer product design. Customers are
responsible for their products and applications using PLE components. To minimize the risks associated
with the customer products and applications, customers should provide adequate design and operating
safeguards.
PLE products are not designed, intended, authorized or warranted to be suitable for use in life support
applications, devices or systems or other critical applications that may involve potential risks of death,
personal injury or severe property or environmental damage. Inclusion of PLE products in such
applications is understood to be fully at the risk of the customer. Use of PLE products in such applications
requires the written approval of an appropriate PLE officer. Questions concerning potential risk
applications should be directed to PLE.
PLE does not warrant or represent that any license, either express or implied, is granted under any PLE
patent right, copyright, artwork or other intellectual property right relating to any combination, machine or
process which PLE product or services are used. Information published by PLE regarding third-party
products or services does not constitute a license from PLE to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under
the patents or other intellectual property of the third party, or a license from PLE under the patents or other
intellectual property of PLE.
Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is
without alteration and is accompanied by associated warranties, conditions, limitations and notices.
Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not
responsible or liable for such altered documents.
Resale of PLE products or services with statements different from or beyond the parameters stated by
PLE for that product or service voids all express and implied warranties for the associated PLE product or
service and is an unfair or deceptive business practice. PLE is not responsible for any such statements.
Contacting Pletronics Inc.
Pletronics Inc.
19013 36th Ave. West
Lynnwood, WA 98036-5761 USA
Tel: 425-776-1880
Fax: 425-776-2760
E-mail: [email protected]
URL: www.pletronics.com
Copyright © 2005, 2006, Pletronics Inc.
www.pletronics.com
425-776-1880
8