PJ1117 1 Amp Low Dropout Positive Voltage Regulator T he PJ1117 Series of high performance positive voltage regulators are designed for use in applications requiring low dropout performance at full rated current, Additionally, the PJ1117 Series provides excellent regulation over variations due to changes in line, load and temperature. Outstanding features include low dropout performance at rated current, fast transient response. The PJ1117 Series are three terminal regulators with fixed and adjustable voltage options available in popular packages. TO-220 Pin: 1.Adj (Com) 2.Out 3.In FEATURES z Low dropout voltage 1.3 V max. z Full current rating over line and temperature z Fast transient response z ±2%Total output regulation over line, load and temperature • Adjust pin current max 120 µ A over temperature • Line regulation typical 0.015%. • Load regulation typical 0.05%. • Fixed/adjustable output voltage • TO-220, TO-263, TO-252& SOT-223 package BLOCK DIAGRAM TO-263 TO-252 SOT-223 Pin: 1.Adj (Com) 2.Out 3.In ORDERING INFROMATION Device Operating Temperature Package (Ambient) PJ1117CZ-adj / 1.8V PJ1117CZ-2.5V /2.85V PJ1117CZ-3.3V PJ1117CZ-5.0V PJ1117CM –adj / 1.8V TO-220 PJ1117CM-2.5V /2.85V PJ1117CM-3.3V PJ1117CM-5.0V -20 to +85oC PJ1117CW-adj / 1.8V PJ1117CW-2.5V/2.85V PJ1117CW-3.3V PJ1117CW-5.0V PJ1117CP-adj / 1.8V PJ1117CP-2.5V/2.85V PJ1117CP-3.3V PJ1117CP-5.0V NOTE: Contact factory for additional voltage option. TO-263 SOT-223 TO-252 ABSOLUTE MAXIMUM RATING Parameter Symbol Maximum Units Input Voltage VIN 7 V Power Dissipation PD Internally Limited W Thermal Resistance Junction to Case θ JC 2.5 Thermal Resistance Junction to Ambient θJA 50 Operating Junction Temperature Range TJ 0 to +125 Operating Ambient Temperature Range TA -20 to +85 Storage Temperature Range TSTG -25 to 150 Lead Temperature (Soldering) 10 Sec. TLEAD 260 1-6 o C /W o C 2002.rev.A PJ1117 1 Amp Low Dropout Positive Voltage Regulator ELECTRICAL CHARACTERISTICS Unless otherwise specified, Adjust VIN = 2.75V to 12V and Adjust Io = 10mA to 1.0A Fixed VIN = 4.75V to 12V and Fixed Io = 10mA to 1.0A (For Fixed 5.0V Output Version ,VIN = 7.5V to 12V ) Test Conditions Parameter (1) Output Voltage Symbol VIN -VOUT IO TJ(4) Min Typ Max Vo 5V 10mA 25 0.99|Vo| Vo 1.01|Vo| Over Temp. 0.98|Vo| 25 1.238 Over Temp. 1.225 Fixed Voltage (1) Reference Voltage VREF 5V 10mA Adj Voltage Line Regulation(1) REG(LINE) 10mA (Vin-Vout=3V) Load Regulation(1) REG(LOAD) (Vin-Vout=3V) Dropout Voltage Test Limits VD Current Limit 1.02|Vo| 1.250 1.275 0.015 Over Temp. 0.035 25 0.05 0.3 Over Temp. 0.2 0.4 25 1 1.1 IcL 1.0 0.2 % V 1.3 1.1 A Over Temp. (Vin-Vout=5V) Quiescent Current Fixed Model IQ Temperature Coefficient Tc Adjust Pin Current IADJ 5V 12 14 0.005 25 55 0.2 ΔIADJ Temperature Stability Ts 5V Minimum Load Current Adjust Model Io 5V RMS Output Noise(2) VN Ripple Rejection Ratio(3) RA 500mA Over Temp. 5 1.0A Over Temp. μA 5 0.5 25 5V mA ％/℃ 120 Adjust Pin Current Change V 1.262 25 ΔVREF =1% Units 60 % 10 mA 0.003 %Vo 72 dB (1)Low duty cycle pulse testing with Kelvin connections required. (2)Bandwidth of 10Hz to 10KHz. (3)120Hz input ripple (CADJ for ADJ) =25μF . (4)Over Temp.-over specified operating junction temperature range. 2-6 2002.rev.A PJ1117 1 Amp Low Dropout Positive Voltage Regulator Typical Application Circuit (1) C1 NEEDED IF DEVICE IS FAR FROM FILTER CAPACITORS (1) C1 NEEDED IF DEVICE IS FAR FROM FILTER CAPACITORS (2) C2 REQUIRED FOR STABILITY 3-6 2002.rev.A PJ1117 1 Amp Low Dropout Positive Voltage Regulator 4-6 2002.rev.A PJ1117 1 Amp Low Dropout Positive Voltage Regulator TO-220 Mechanical drawing DIM A B C D E F G H I J K L M N O P TO-220 DIMENSION MILLIMETERS INCHES MIN MAX MIN MAX 10.00 10.50 0.394 0.413 3.24 4.44 0.128 0.175 2.44 2.94 0.096 0.116 3.565 4.315 0.140 0.170 0.68 0.92 0.027 0.036 1.115 1.485 0.044 0.058 2.345 2.715 0.092 0.107 13.49 14.31 0.531 0.563 4.475 5.225 0.176 0.206 1.15 1.39 0.045 0.055 27.78 29.62 1.094 1.166 2.175 2.925 0.086 0.115 0.297 0.477 0.012 0.019 8.28 8.80 0.326 0.346 14.29 15.31 0.563 0.603 6.01 6.51 0.237 0.256 TO-263 Mechanical drawing DIM A B C D E F G H I J 5-6 TO-263 DIMENSION MILLIMETERS INCHES MIN MAX MIN MAX 10.00 10.50 0.394 0.413 14.60 15.87 0.575 0.625 0.68 0.92 0.027 0.036 2.42 2.66 0.095 0.105 4.31 4.83 0.170 0.190 1.14 1.40 0.045 0.055 2.28 2.79 0.090 0.110 0.45 0.73 0.018 0.029 8.28 8.80 0.326 0.346 1.14 1.4 0.045 0.055 2002.rev.A PJ1117 1 Amp Low Dropout Positive Voltage Regulator TO-252 Mechanical drawing DIM A B C D E F G H I J TO-252 DIMENSION MILLIMETERS INCHES MIN MAX MIN MAX 6.57 6.84 0.259 0.269 9.25 10.40 0.364 0.409 0.62 0.76 0.024 0.030 2.56 2.67 0.101 0.105 2.30 2.39 0.090 0.094 0.49 0.57 0.019 0.022 1.46 1.58 0.057 0.062 0.52 0.57 0.020 0.022 5.34 5.55 0.210 0.219 1.46 1.64 0.057 0.065 SOT-223 Mechanical drawing DIM A B C D E F G H I J K L 6-6 SOT-223 DIMENSION MILLIMETERS INCHES MIN MAX MIN MAX 6.30 6.80 0.248 0.268 2.9 3.1 0.114 0.122 3.3 3.7 0.130 0.146 0.63 0.83 0.025 0.033 4.60 4.60 0.181 0.181 2.30 2.30 0.091 0.091 0.835 1.035 0.033 0.041 6.7 7.3 0.264 0.287 0.255 0.355 0.010 0.014 16° 16° 16° 16° 1.55 1.80 0.061 0.070 10° 10° 10° 10° 2002.rev.A