Solid State Relays PCB, 1-Phase DCS Type RP 530 ...-.-0 • DC Solid State Relay for PCB mounting • Rated operational current: 1 and 3 ADC • Operational voltage range: Up to 350 VDC • Input range: 3 to 32 VDC • Insulation: OPTO (input-output) 4000 VACrms Product Description Ordering Key The DC switching relay for PCB mounting is used in applications where there is a need for fast switching of small DC loads with a high input/output insulation of more than 4000 VACrms. The DC switching transistor relay always switches on and off in accordance with the applied control voltage. Solid State Relay (PCB) Switching mode Rated operational voltage Rated operational current Control voltage Switching mode Rated operational voltage Rated operational current Control voltage 530: DC switching 060: 60 VDC 200: 200 VDC 350: 350 VDC 1: 1 ADC 3: 3 ADC 0: 3 to 32 VDC Control voltage Rated operational current 1 ADC RP 530 060-3-0 Type Selection Selection Guide Rated operational voltage 60 VDC 200 VDC 350 VDC 3 to 32 VDC 3 to 32 VDC 3 to 32 VDC 3 ADC RP 530 060-3-0 RP 530 200-1-0 RP 530 350-1-0 General Specifications Operational voltage range Off-state blocking voltage Approval RP 530 060-3-0 RP 530 200-1-0 RP 530 350-1-0 3 to 60 VDC ≥ 60 VDC CSA 3 to 200 VDC ≥ 200 VDC CSA 3 to 350 VDC ≥ 350 VDC CSA Specifications are subject to change without notice 1 RP 530 ...-.-0 Input Specifications Control voltage range Pick-up voltage Drop-out voltage Reverse voltage Activating frequency Input impedance Response time pick-up @ V in ≥ 5 V Response time drop-out Control voltage rise and fall time RP 530 060-3-0 RP 530 200-1-0 RP 530 350-1-0 3 to 32 VDC ≤ 3 VDC ≥ 1 VDC ≤ 6 VDC ≤ 100 Hz 1 kΩ 3 to 32 VDC ≤ 3 VDC ≥ 1 VDC ≤ 6 VDC ≤ 100 Hz 1 kΩ ≤ 100 µs ≤ 1 ms ≤ 100 µs ≤ 1 ms no limit ≤ 100 µs Output Specifications RP 530 060-3-0 Rated operational current DC 1 DC 5 DC 13 Minimum operational current Rep. overload current t=1 s Off-state leakage current @ rated voltage On-state voltage drop @ rated current RP 530 200-1-0 RP 530 350-1-0 3A 2A 3A 1 mA 5A 1A 0.5 A 1A 1 mA 2A 1A 0.5 A 1A 1 mA 2A ≤ 1 mA ≤ 1 mA ≤ 1 mA ≤ 1.5 V ≤ 1.5 V ≤ 1.5 V Thermal Specifications Insulation Input - Output Operating temperature Storage temperature Junction temperature Rth junction-case Rth junction to ambient Rated insulation voltage Insulation resistance Insulation capacitance -40 to +60°C (-40 to +140°F) -40 to +100°C (-40 to +212°F) ≤ 125°C (≤ 257°F) ≤ 15 K/W ≤ 22.5 K/W ≥ 4000 VACrms ≥ 1010 Ω ≤ 8 pF Wiring Diagrams RP 530 200-1-0 RP 530 350-1-0 RP 530 060-3-0 Control input 2 Line/load Control input Line/load Specifications are subject to change without notice RP 530 ...-.-0 Functional Diagrams RP 530 200-1-0 RP 530 060-3-0 RP 530 350-1-0 Mains input Mains input Control input Control input Load output Load output Applications Wiring examples: Inductive load High power switching 100 Ω Load RP 530 PNP transistor RP 530 NPN transistor RP 530 Load Load Housing Specifications Dimensions 11M M = 1/10” = 2.54 mm 9M 3M 4M 1M 10.5 ** An inductive load must be suppressed by a diode. Weight Housing material Terminals Potting compound Derating Curve Rated operational current Accessories Fuses For further information refer to “General Accessories”. 25.4 * 43 * Approx. 20 g Noryl GFN 1, black Phos. bronze, tin-plated Polyurethane 2 +3 4 6 ** 1 4 x ø1 * = ± 0.2 mm ** = ± 0.5 mm Specifications are subject to change without notice Ambient temperature 3