DATA SHEET SSC-CMX2 Clip Addressable Output Module Features: • • • • • SSL approved LED indication 99 per loop Easy to install Rotary wheel for ease of addressing • Loop powered (When used as relay) • Simply break tab for non monitored relay operation Description: The SSC-CMX2 control module is an addressable output module that can be used either as a relay or a supervised 24VDC output using CLIP protocol (99 detectors and 99 modules per loop). Breaking the tab on the module changes operation from monitored output to a changeover relay. Rotary decade switches are used to set the address of each module. Specifications: Nominal operating voltage: EOL resistance: Temperature range: Dimensions: Mounting Box: (SMB500) 15 to 32 VDC 47K ohms (only required when used as a monitored output) 0°C to 49°C 115mm H x 100mm W x 31mm D 125mm H x 125mm W x 50mm D Approvals: SSL Approved, ActivFire Listing: afp 1801 Wiring Diagrams: Distributors For: g:\documents\datasheets\word\1 - addressable fire panels\field devices\addresable io modules\ssc-cmx2.doc 51/9 Hoyle Avenue PO Box 6009 tel 02 8850 2888 Castle Hill NSW 2154 Dural DC NSW 2158 fax 02 8850 2999 Australia www.firesense.com.au Australia FireSense Pty Ltd as trustee for FireSense Trust ABN 11 720 788 915