Bolymin, Inc. uuu LCD MODULE SPECIFICATION MODEL NO. ST50AN01 FOR MESSRS: _________________________________________________ ON DATE OF : _________________________________________________ APPROVED BY: __________________ ____________________ __________________ 1 Bolymin, Inc. uuu 1. APPLICATION This technical specification applies to 5” color TFT-LCD module, P50AD3. 2. FEATURES ¡NTSC E system ¡Pixel E in Delta configuration ¡Slim E and compact Active area / Outline area = 64.3 % ¡Aperture E Ratio : 64.3% ¡Viewing E Direction : 6 o’clock 3. MECHANICAL SPECIFICATIONS Parameter Specifications Unit Screen Size 5 (diagonal) inch Display Format 600¡ Ñ 234 dot Active Area 102.6(H)¡ Ñ 73.9(V) mm2 Dot Pitch 0.171(H)¡ Ñ 0.316(V) mm2 Pixel Configuration Delta Outline Dimension 127.2(W)¡ Ñ 92.7(H)¡ Ñ 12.9(D) Weight 195 mm3 g Note 1: Refer to Fig. 1 2 Remark Note 1 Bolymin, Inc. uuu Fig. 1 3 Bolymin, Inc. uuu 4. ELECTRICAL SPECIFICATIONS 4.1 INPUT / OUTPUT TERMINAL PIN No. Symbol 1 DC IN 2 I/O I Description Remark Power Supply for Board & Panel Note 2 Power Sw Power Supply On Off Note 2 3 COLOR VR For Color Alignment Note 2 4 CONTRAST VR For Contrast Alignment Note 2 5 BRIGHT VR For Brightness Alignment Note 2 6 AV IN 1 Composite Video / Audio Signal Input Note 2 7 AV SW AV IN 1/ AV IN 2 Select Note 2 8 AV IN 2 I Composite Video / Audio Signal Input Notes 2 9 AV OUT O Composite Video / Audio Signal Output Note 2 10 AU OUT O Audio Signal Output Note 2 11 VOLUME VR For Audio Volume Alignment Note 2 I NOTE 2 : Refer to Fig 2 4.2 ABSOLUTE MAXIMUM RATINGS Parameter Symbol Min. Typical Max. Unit Remark AV IN 1 0.8Vp-p 1.0Vp-p 1.2Vp-p V NOTE 2 AV IN 2 0.8Vp-p 1.0Vp-p 1.2Vp-p V NOTE 2 Composite Signal Video AV IN 1 - - 70 mVRMS NOTE 2 AV IN 2 - - 70 mVRMS NOTE 2 10.8 12 13.2 V NOTE 2 0.1 W NOTE 2 8OHM Composite Signal Audio Supply Voltage DC IN Audio Out AU OUT 4 Bolymin, Inc. uuu 4.3 CURRENT CONSUMPTION Parameter Current for Unit Condition Min Typ Max Unit Vcc=12V - - 500 mA Remark 6 5 4 7 3 8 9 2 10 1 11 5 Bolymin, Inc. uuu 5. OPTICAL CHARACTERISTICS 5-1.SPECIFICATION: Ta¡ × 25¢ J Parameter Symbol Condition MIN. TYP. MAX Unit Remarks . Horizontal £ c CR¡ 1Ö 0 Vertical £ (cto 12 o’clock) £ c(to 6 o’clock) Contrast Ratio CR Response time Rise Tr £c¡ × 0¢ X Fall Tf Transmittance Ratio T Reflectance Ratio R Brightness White x Chromaticity y Red x Chromaticity y Green x Chromaticity y Blue x Chromaticity y Lamp Life ¡ Ï 25¢ J Time ¡ Ð 30¢ J Viewing Angle ¡ Ó 45 10 ¡ 5Ó 5 15 deg deg -30 -35 deg 80 120 30 50 5.0 5.5 240 .300 .342 .605 .355 .275 .633 .146 .082 200 10,000 2,000 Note 1 ms ms ¢ H ¢ H cd/m2 Note 2 Note 2 Note 2 hr hr Luminance when LCD is White Note 1 ¡ R CR¡ × Luminance when LCD is Black Note 2 ¡ R Topcon BM-7 luminance meter is used in the testing (after 10 minutes operation). 6 Bolymin, Inc. uuu 5-2 View Angle Diagram: normal (£ c¡ 0× ) observer £ c 3 12 £ X LCD panel 6 £X ¡ R viewing direction 9 £c¡ vRiewing angle 7 Bolymin, Inc. uuu 6. RELIABILITY TEST NO 1 2 3 4 5 6 7 8 9 Test Item Test Condition High Temperature Storage Ta¡ × ¡ Ï 80¢ J, 240 hr Test Low Temperature Storage Ta¡ × ¡ Ð 30¢ J, 240 hr Test High Temperature Tp ¡ × ¡ Ï 60¢ J , 240 hr Operation Test Low Temperature Tp ¡ × ¡ Ð 10¢ J , 240 hr Operation Test High Temperature & High Tp ¡ × 60¢ J , 95¢ HRH , 240 hr Humidity Operation Test Thermal Cycling (non¡ Ð 25¢ J¡ ÷ ¡ Ï 25¢ J¡ ÷ ¡ Ï 70¢ J , 200 Cycle operating) 30 min 5 min 30 min Vibration Test Frequency ¡ R 10¡ ã 55 Hz (non-operating) Amplitude ¡ R 1.5 mm Gravity ¡ R 1G Sweep time ¡ R 15 min Test period ¡ R 2 hr for each direction of X, Y, Z Shock Test Max Gravity ¡ R 50 G (non-operating) Direction ¡ R ¡ Ó X,¡ Ó Y ,¡ Ó Z Cycle ¡ R one cycle¡ þ each direction Electrostatic Test ¡ Ï 200 V , 200 pF (0£ [) one cycle ¡ þ per terminal Ta¡ R ambient temperature Tp¡ R panel temperature 8