CAMERA SYSTEMS PRODUCT SPECIFICATION ® INTEGRATED CAMERA SYSTEM, INDOOR/OUTDOOR, WALL OR CEILING Product Features IP66 • • • • • • • • • • • • • • • • • Fully-Integrated Enclosure With Camera and Lens Package Rugged, Impact- and Vandal-Resistant Easy to Install Versatile, Aesthetically Pleasing “Track Light” Design, Mounts to Wall or Ceiling Tamper-Resistant Hardware Concealed Cabling 12 VDC or 24 VAC Operation Low-Temperature Operation to -50°F (-46°C); de-ices to -10°F (-23°C) Clear Window NTSC/PAL or EIA/CCIR Camera Formats All Color Cameras Feature Digital Signal Processing Fixed Focal Length Lens of 2.9 mm, 6 mm, 8 mm, or 12 mm Varifocal Lens of 3 mm to 6 mm with Auto Iris, Available with High Resolution Color Camera AC Line Lock with All Color Cameras in 24 VAC Operation All Lenses, Except Varifocals, are Pre-focused at the Factory Meets NEMA 4X and IP66 Standards (when installed) Optional Conduit Adapter Available 300 SERIES The 300 Series Camclosure™ Integrated Camera System incorporates a camera and lens package into a small, unobtrusive, medium-security enclosure. The system is quick and easy to install in a variety of indoor or outdoor applications. It is ideal for residential, office, mall, hospital, school, parking garage, correction and detention, and other mediumsecurity installations subject to vandalism. All models are designed for either 12 VDC or 24 VAC operation. Each unit is provided with two quickconnect mating connectors with leads; one for 12 VDC and one for 24 VAC. Just select the appropriate connector for your application, wire the leads to your power source with wing nuts, and snap the connectors together -- it’s that simple! Camera options include 1/3-inch format CCD color imager (standard or high resolution) and monochrome imager (standard resolution) with fixed focal length lenses of 2.9 mm, 6 mm, 8 mm, and 12 mm. Cameras with a varifocal lens have a 1/4-inch format high resolution CCD color imager. The 300 Series System ships with a sun shroud and 4S adapter plate to mount the unit to a standard 4-square electrical box. The sun shroud is designed for outdoor installations and reduces internal temperature by 10 degrees F (6 degrees C). An optional conduit adapter (ICS300-COND) allows the unit to be used in applications requiring conduit. International Standards Organization Registered Firm ISO 9001 Quality System DataFAX Documents SPEC: 22408 MANUAL: 224086 (ICS300), 22966 (ICS300-COND) (Product specifications and manuals also available through Pelco Online at www.pelco.com) C2408/REVISED 10-00 25 CAMCLOSURE ICS300 SERIES WALL/CEILING 300 Series Camclosure™ Camera System CAMERA SYSTEMS ICS300 SERIES WALL/CEILING TECHNICAL SPECIFICATIONS ELECTRICAL Input Voltage Camera Heaters Video Connector 12 VDC or 24 VAC (±10%) <3 watts 10 watts when active; thermostatically controlled BNC 5.18 (13.20) 7.40 (18.79) 2.21 (5.61) 3.00 (7.62) GENERAL Pan/Tilt Adjustment Construction Manual 180° pan; 180° tilt Aluminum base and cover, steel camera mounting bracket 3.48 (8.84) 2.00 (5.08) Environmental Environment Operating Temperature Thermostat Operation Low temperature, indoor/outdoor -50° to 122°F (-46° to 50°C); de-ices at -10°F (-23°C) Heater is thermostatically controlled to activate ON at 50°F (10°C) and OFF at 80°F (27°C) PHYSICAL Finish Dimensions Camclosure Sun Shroud Unit Weight Shipping Weight Gray polyester powder coat 2.71 (diameter) x 7.79 (L) inches (6.88 x 19.79 cm) 2.60 (H) x 6.13 (L) inches (5.23 x 15.57 cm) Snap fit design mounts sun shroud to enclosure 1.45 lb (0.66 kg) 2.0 lb (0.90 kg) CERTIFICATIONS/RATINGS ◆ CE and FCC, Class A (models with monochrome cameras only, excluding auto iris models) ◆ CE and FCC, Class B (models with color cameras only, excluding auto iris models) ◆ UL listed to Standard 2044 ◆ cUL to CSA C22.2 No.1 ◆ Meets IP66 when installed properly ◆ Meets NEMA 4X when installed properly, includes: – Corrosion protection test; NEMA 250, Section 6.9 (exceeds IEC 68-2-11) – Rust resistance test; NEMA 250, Section 6.8 – Hose down test; NEMA 250, Section 6.7 – Exceeds SAE J1211 dust test ◆ Tested in accordance with MIL-STD 810E as follows: – Shock test; Section 516.4 (exceeds IEC 68-2-27) – Humidity test; Sections 520.1 and 507.3 (exceeds IEC 68-2-30) – Vibration test, Section 514.4 (exceeds IEC 68-2-6) ◆ ASTM Shipping Standard ◆ ISTA Shipping Standard All tests are performed in accordance with ISO Guide 25 and ANSI/NCSL Z540-1 26 1.31 (3.32) 1.30 (3.30) 2.76 (7.01) WINDOW VIEW BASE VIEW NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES. CAMERA SYSTEMS TECHNICAL SPECIFICATIONS Black & White Standard Resolution (Models ICSxxx-MAx/ ICSxxx-MCx) Color Standard Resolution (Models ICSxxx-CAx/ ICSxxx-CCx) Color Color High Resolution, Fixed Focal Lens High Resolution, Varifocal Lens (Models ICSxxx-CRx/ (Models ICSxxx-CRVx/ ICSxxx-CSx) ICSxxx-CSVx) Signal System Imaging Device EIA or CCIR 1/3-inch CCD NTSC or PAL 1/3-inch Interline Color CCD NTSC or PAL 1/3-inch Interline Color CCD (Super HAD) Scanning System 2:1 Interlace 2:1 Interlace 2:1 Interlace 2:1 Interlace Sync System Internal 12 VDC: Internal 24 VAC: External (VD Lock) 12 VDC: Internal 24 VAC: External (VD Lock) 12 VDC: Internal 24 VAC: External (VD Lock) EIA: 420 TV lines CCIR: 420 TV lines NTSC: 350 TV lines PAL: 350 TV lines NTSC: 470 TV lines PAL: 460 TV lines NTSC: 480 TV lines PAL: 480 TV lines 50 dB 48 dB 48 dB 48 dB (AGC Off) Horizontal Resolution Signal-to-Noise Ratio Min. Illumination Sensitivity NTSC or PAL 1/4-inch Interline Color CCD 0.1 lux (f2.0) 1 lux (f2.0) 1 lux (f2.0) Less than 1.2 lux (f1.2) Video Out 1 Vp-p Composite (75 ohm) 1 Vp-p Composite (75 ohm) 1 Vp-p Composite (75 ohm) 1 Vp-p Composite (75 ohm) Gain Control Auto Auto NTSC: Auto PAL: Manual On/Off by DIP switch (0-20dB) Exposure Electronic Shutter (1/60 - 1/100,000) Electronic Shutter (1/60 - 1/100,000) Electronic Shutter (1/60 - 1/100,000) Electronic Shutter (1/60 - 1/100,000) White Balance (not applicable) Auto NTSC: Auto PAL: Manual Auto Backlight Compensation Auto ON, OFF (switchable) NTSC: Auto PAL: Manual On/Off Auto; adjusts AGC and AES Power Source* 12 VDC, 24 VAC 12 VDC, 24 VAC 12 VDC, 24 VAC 12 VDC, 24 VAC *24 VAC power is recommended when installing any Camclosure™ Integrated Camera System under flourescent lighting conditions. LENS SPECIFICATIONS Fixed Focal Length Lenses Focal Length Color B/W 2.9 mm 3.0 mm Format Size Color B/W Color Varifocal Lens B/W Color B/W 6.0 mm 8.0 mm 12.0 mm 3.0 to 6.0 mm 1/3-inch 1/3-inch 1/3-inch 1/3-inch 1/4-inch 2.0 1.8 Fixed N/A N/A Fixed N/A N/A Relative Aperture (F) Operation Iris Focus Zoom 2.5 1.8 2.5 Fixed N/A N/A 2.0 Fixed N/A N/A Angle of View** Horizontal 90° 87° 42° 38° 32° 29° Diagonal — — — — — — Vertical 69° 67° 33° 30° 25° 23° Auto (f1.2 to f300) Manual (minimum 50 cm) Manual 21° — 72° to 36° — 17° 1.2 to 1.5 96° to 46° 52° to 26° **Focal length specifications presume a 10% Horizontal and 4% Vertical monitor overscan. 27 CAMCLOSURE ICS300 SERIES WALL/CEILING CAMERA SPECIFICATIONS CAMERA SYSTEMS MODEL NUMBERS CAMCLOSURE ICS300 SERIES WALL/CEILING ® 300 SERIES SYSTEM MODELS Camera Type Color, High Resolution Lens/Iris NTSC PAL EIA CCIR 2.9 mm 6 mm 8 mm 12 mm 3-6 mm with Auto Iris ICS300-CR3 ICS300-CR6 ICS300-CR8 ICS300-CR12 ICS300-CRV3A ICS300-CS3 ICS300-CS6 ICS300-CS8 ICS300-CS12 ICS300-CSV3A — — — — — — — — — — ICS300-CC3 ICS300-CC6 ICS300-CC8 ICS300-CC12 — — — — — — — — Color, Standard Resolution 2.9 mm 6 mm 8 mm 12 mm ICS300-CA3 ICS300-CA6 ICS300-CA8 ICS300-CA12 B&W, Standard Resolution 3.0 mm 6 mm 8 mm 12 mm — — — — OPTIONS — — — — ICS300-MC3 ICS300-MC6 ICS300-MC8 ICS300-MC12 RECOMMENDED POWER SUPPLIES ICS300-COND Conduit adapter. Can be adapted to any vertical or horizontal mounting surface. (For use with 24 VAC models only) TF2000 MCS Series MCS*E Series WCS Series 1.73 (4.39) 4.36 (11.07) ICS300-MA3 ICS300-MA6 ICS300-MA8 ICS300-MA12 4.20 (10.67) Power supply for 24 VAC cameras, 20 vA. (For single camera application.) Multiple 24 VAC camera power supply, indoor. (For multiple camera application.) (See C653 spec) Multiple 24 VAC camera power supply, indoor. (For multiple camera application.) (See C655 spec) Multiple 24 VAC camera power supply, outdoor. (For multiple camera application.) (See C654 spec) 5.00 12.7 NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES. Indicates change or addition since last revision. 28 Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 • Pelco Online @ www. pelco.com In the US and Canada: Tel (800) 289-9100 • FAX (800) 289-9150 • DataFAX (800) 289-9108 International Customers: Tel +1(559) 292-1981 • FAX +1(559) 348-1120 • DataFAX +1(559) 292-0435 Camclosure™ is a trademark of Pelco. Specifications subject to change without notice. ©Copyright 2000, Pelco. All rights reserved.