PHAP33 series Tact switches Distinctive features and specifications ❑ Wide range of case formats ❑ SMT and through-hole models ❑ Normally closed models available Models Performances PHAP3381 PHAP3382 PHAP3383 PHAP3384 PHAP3390 PHAP3391 PHAP3371 PHAP3372 PHAP3373 PHAP3374 PHAP3378 PHAP3355 PHAP3361 PHAP3362 PHAP3363 PHAP3365 PHAP3366 PHAP3301 PHAP3302 PHAP3303 PHAP3305 PHAP3306 PHAP3307 PHAP3308 PHAP3368 Current/voltage rating 50mA 12VDC Contact resistance 100 mΩ max. Insulation resistance 100 MΩ min. Dielectric strength Electrical life (cycles) PHAP3350 PHAP3351 PHAP3352 PHAP3353 PHAP3320 PHAP3321 250 VAC min. (1 minute) 70.000 75.000 30.000 100.000 100.000 100.000 Operating force 1,6N ± 0,5N 1,6N +0,5/-0,3N 1,8N ± 0,5N 1,6N ± 0,5N 2N ± 0,3N 1,6N ± 0,5N Travel 0,20/ 0,25 mm 0,25 mm 0,25 mm 0,25 mm 0,50 mm 0,30 mm Operating temperature -20°C to +70°C Storage temperature -30°C to +80°C Vibrations 10-500 Hz / 10 g IR reflow soldering C 240°C for 20 seconds max. Wave soldering 255°C for 5 seconds max. Manual soldering 300°C for 3 seconds max. - Dimensions : First dimensions are in mm while inches are shown as bracketted numbers. Packaging unit : 1.000 pieces and multiples, except for tape and reel packaging (see following pages). APEM www.apem.com C-3 PHAP33 series SMT tact switches Microminiature and ultra-low profile - 4,2 x 4,2 mm case • Ultra-compact size for board space saving : 4,2 x 4,2 mm case, 1,5 mm button height from PCB • Reflow solderable • With or without positioning pins • For tape and reel packaging, add ”R” at the end of model number. 1.10 (.043) 1 3 2 4 2.80 (.110) 0.50 (.020) 3.50 (.137) 7.00 (.276) 1.50 (.059) PHAP3390 2.60 (.102) ø0.80 (.031 DIA) Ø2.00 (.079DIA) 3.80 (.150) Model number 4.20 (.165) 6.00 (.236) 0.60 (.024) Ø0.70 (.028DIA) C 1.40 (.055) With positioning pins 4.80 (.188) 4.40 (.173) Operating force : 2,6N ± 0,5N - Travel : 0,20 mm 1 2 3 4 Without positioning pins 6.00 (.236) Model number 1.50 (.059) PHAP3391 4.80 (.188) Ø2.00 (.079DIA) 1 3 2 4 3.80 (.150) 4.20 (.165) 7.00 (.276) 1.10 (.043) 0.50 (.020) 2.60 (.102) 3.50 (.137) 4.40 (.173) Operating force : 2,6N ± 0,5N - Travel : 0,20 mm 1 2 3 4 PACKAGING ETIQUETTE LABEL (LABEL) Quantity per reel : 3.400 pieces Ø330.00 (13.00 DIA) C-4 www.apem.com 2.00 (.079) 2.50 (.098) 2.00 (.079) 12.00 (.472) Ø1.50 (.059 DIA) 5.50 (.217) 2.00 (.079) 1.75 (.069) To order a product with tape and reel packaging, add ”R” at the end of its model number. Example : PHAP3390R. 4.00 (.157) 14.00 (.551) Ø13.00 (.512 DIA) 8.00 (.315) APEM PHAP33 series SMT tact switches Ultra-low profile - 6 x 6 mm case • Ultra-compact size for board space saving : 6 x 6 mm case, 1,6 mm button height from PCB • Reflow solderable • Types for iron soldering (L = 10 mm) • With positioning pins • With or without grounding tab for protection against electrostatic discharges • For tape and reel packaging, add ”R” at the end of model number. Without grounding tab 10 mm 2.30 (.091) 0.70 (.028) 1 1.60 (.063) Ø3.00 (.118 DIA) Ø1.50 (.059 DIA) 6.60 (.260) C 3 2 10.40 (.409) 8 mm PHAP3382 4.50 (.177) 4.70 (.185) PHAP3381 0.30 (.012) L Dim. «L» 4.70 (.185) Model No 4.50 (.177) 6.00 (.236) 1.60 (.063) Ø1.30 (.051 DIA) 6.00 (.236) 4 1.40 (.055) 1 2 3 4 Operating force : 1,6N ± 0,5N - Travel : 0,25 mm PHAP3383 8 mm PHAP3384 10 mm 0.70 (.028) 1 5 3 1.60 (.063) L 2.30 (.091) 4.50 (.177) 4.70 (.185) 0.30 (.012) 6.00 (.236) Dim. «L» 4.50 (.177) 4.70 (.185) Model No Ø1.30 (.051 DIA) 1.60 (.063) 6.00 (.236) Ø3.00 (.118 DIA) Ø1.50 (.059 DIA) 6.60 (.260) 2 10.40 (.409) With grounding tab 4 1.40 (.055) 1 2 3 4 5 Operating force : 1,6N ± 0,5N - Travel : 0,25 mm PACKAGING 2.00 (.079) Quantity per reel : 2.200 pieces Ø330.00 (13.00 DIA) APEM 2.00 (.079) www.apem.com 3.00 (.118) Ø1.50 (.059 DIA) 7.50 (.295) Ø13.00 (.512 DIA) 1.75 (.069) To order a product with tape and reel packaging, add ”R” at the end of its model number. Example : PHAP3383R. 4.00 (.157) 18.00 (.709) 16.00 (.630) ETIQUETTE LABEL (LABEL) 12.00 (.472) C-5 PHAP33 series SMT tact switches Low profile - 6,2 x 6,2 mm case • Ultra-compact size for board space saving : 6,2 x 6,2 mm case, 2,6 to 3,4 mm button height from PCB • Reflow solderable • With or without grounding tab for protection against electrostatic discharges • Models with external terminals type G or internal terminals type J • For tape and reel packaging, add ”R” at the end of model number. External terminals type G (gullwing) 6.20 (.244) 4.00 (.157) Ø3.00 (.118 DIA) Dim. «L» PHAP3371 2,6 mm PHAP3371A 3,4 mm 0.70 (.028) 2.60 (.102) 4 12.00 (.433) 9.00 (.354) Model No 2 6.20 (.244) C 5.80 (.228) L 1 4.00 (.157) 3 1.00 (.039) 1 2 3 4 Operating force : 1,6N + 0,5N/-0,3N - Travel : 0,25 mm 6.20 (.244) L 4.00 (.157) Ø3.00 (.118 DIA) 2,6 mm PHAP3372AR 3,4 mm 8.80 (.315) Dim. «L» 6.20 (.244) Model No PHAP3372R 6.80 (.268) 2 0.70 (.028) 2.60 (.102) 4 1 2.80 (.110) Internal terminals type J - tape and reel packaging 3 1.00 (.039) 4.00 (.157) 1 2 3 4 Operating force : 1,6N + 0,5N/-0,3N - Travel : 0,25 mm PACKAGING 2.00 (.079) Quantity per reel : 1.600 pieces Ø330.00 (13.00 DIA) C-6 www.apem.com 2.00 (.079) 3.70 (.146) Ø1.50 (.059 DIA) 7.50 (.295) Ø13.00 (.512 DIA) 1.75 (.069) To order a product with tape and reel packaging, add ”R” at the end of its model number. Example : PHAP3371R. 4.00 (.157) 18.00 (.709) 16.00 (.630) ETIQUETTE LABEL (LABEL) 12.00 (.472) APEM PHAP33 series SMT tact switches Low profile - 6,2 x 6,2 mm case 6.20 (.244) 2.60 (.102) 2.90 (.114) 1.40 (.055) 8.40 (.331) Model No PHAP3373 6.20 (.244) 8.00 (.315) Ø3.00 (.118 DIA) 0.70 (.028) 4.50 (.177) 1.60 (.063) Button height from PCB : 2,9 mm 2 4 1 3 4.50 (.177) 1 2 3 4 Operating force : 1,6N + 0,5N/-0,3N - Travel : 0,25 mm Button height from PCB : 3,1 mm - with grounding tab 6.20 (.244) 0.70 (.028) 4.50 (.177) 2.50 (.098) 2.60 (.102) Ø3.00 (.118 DIA) C PHAP3374 Dim. «L» 0.70 (.028) 3.10 (.122) 8 mm 9.50 (.374) L Model No 6.20 (.244) 2 5 4 1 3 1.60 (.063) 4.50 (.177) 1 2 3 4 5 Operating force : 1,6N + 0,5N/-0,3N - Travel : 0,25 mm PACKAGING 2.00 (.079) Quantity per reel : 1.700 pieces Ø330.00 (13.00 DIA) APEM 2.00 (.079) www.apem.com 4.10 (.161) Ø1.50 (.059 DIA) 7.50 (.295) Ø13.00 (.512 DIA) 1.75 (.069) To order a product with tape and reel packaging, add ”R” at the end of its model number. Example : PHAP3373R. 4.00 (.157) 18.00 (.709) 16.00 (.630) ETIQUETTE LABEL (LABEL) 12.00 (.472) C-7 PHAP33 series SMT tact switches Normally closed - 7,6 x 7,6 mm case • Compact size for board space saving : 7,6 x 7,6 mm case, 4,3 mm button height from PCB • Reflow solderable • Standard PCB layout 3.50 (.137) PHAP3378R 1.00 (.039) 0.70 (.028) 10.00 (.393) Model No 1.20 (.043) 7.60 (.299) 9.50 (.374) C 4.30 (.169) 7.60 (.299) Ø3.00 (.118DIA) Normally closed 3 1 4 2 4.50 (.177) 4.50 (.177) 1 2 3 4 Operating force : 1,6N ± 0,5N - Travel : 0,25 mm PACKAGING 4.00 (.157) 18.00 (.709) 2.00 (.079) 1.75 (.069) Quantity per reel : 1.000 pieces Ø330.00 (13.00 DIA) C-8 www.apem.com 2.00 (.079) 4.60 (.181) Ø1.50 (.059 DIA) 7.50 (.295) Ø13.00 (.512 DIA) 16.00 (.630) LABEL 12.00 (.472) APEM PHAP33 series SMT tact switches Microminiature - 6 x 3,5 mm case • Ultra-compact size for board space saving : 6 x 3,5 mm case, 4,3 or 5 mm button height from PCB • Right angle version available 13.20 (.520) 6.00 (.236) 5,0 mm 1.00 (.039) 4,3 mm PHAP3361A 9.00 (.354) Dim. «L» PHAP3361 C 1 3.00 (.118) Model No 3.50 (.138) 0.30 (.012) 0.40 (.016) 3.35 (.132) Vertical mounting 2.00 (.098) 2 1.50 (.059) 3.50 (.138) 1.00 (.039) L 2 1 For tape and reel packaging, add “R” at the end of model number. Operating force : 1,8N ± 0,5N - Travel : 0,25 mm 3.30 (.130) 1 Model No 0.25 (.010) 3 0.60 (.024) 4.20 (.165) 6.90 (.272) 1.45 (.057) 4 5.30 (.209) 3.40 (.133) PHAP3355R 2 0.80 (.034) 0.90 (.035) 0.60 (.024) 0.60 (.024) 1.75 (.069) 1.27 (.050) 1.50 (.059) 3.00 (.118) 2.50 (.098) 3.50 (.138) Horizontal mounting 7.80 (.307) 1 2 3 4 Operating force : 1,8N ± 0,5N - Travel : 0,25 mm PACKAGING 18.00 (.709) 1.75 (.069) Quantity per reel : PHAP3361R : 1.800 pieces PHAP3361AR : 1.800 pieces PHAP3355R : 2.000 pieces Ø330.00 (13.00 DIA) APEM 2.00 (.079) 2.00 (.079) www.apem.com 3.60 (.141) 4.00 (.157) 16.00 (.629) Ø13.00 (.512 DIA) 7.50 (.295) Ø1.50 (.059 DIA) LABEL 8.00 (.314) C-9 PHAP33 series SMT tact switches Microminiature - Low profile - 6,1 x 3,7 mm case • Ultra-compact size for board space saving : 6,1 x 3,7 mm case, 2,5 mm button height from PCB • Available with flat or bent terminals Flat terminals 1.20 (.047) 6.30 (.248) PHAP3365R 9.30 (.366) 6.10 (.240) 1 8.00 (.314) Model No 3.70 (.146) 2.50 (.098) 5.50 (.217) 2.60 (..102) C 2 0.60 (.024) 1.40 (.055) 2 1 Operating force : 1,8N ± 0,5N - Travel : 0,25 mm 1 8.00 (.314) 6.10 (.240) PHAP3366R 4.00 (.157) 1.20 (.047) 6.80 (.267) Model No 3.70 (.146) 2.50 (.098) 5.50 (.217) 2.60 (.102) Bent terminals 2 0.60 (.024) 1.40 (.055) 1 2 Operating force : 1,8N ± 0,5N - Travel : 0,25 mm PACKAGING 2.00 (.079) 1.75 (.069) Ø13.00 (.512 DIA) Quantity per reel : 3.000 pieces Ø330.00 (13.00 DIA) C-10 2.00 (.079) www.apem.com 2.80 (.110) Ø1.50 (.059 DIA) 7.50 (.295) 18.00 (.709) 16.00 (.630) 4.00 (.157) LABEL 8.00 (.314) APEM PHAP33 series SMT tact switches 6 x 6 mm case • 4,3 to 13 mm button height from PCB • Excellent tactile feedback (snap dome) • Standard PCB layout • Caps for model with square actuator Cap colours : 1 : blue - 2 : black - 3 : green 5 : yellow - 6 : red - 7 : ivory Ø4.50 (.177 DIA) 5.50 (.217) 4.00 (.157 SQ) 5.50 (.217) 2.80 (.110) 2.80 (.110) U5520 square U5530 round Round actuator 4.50 (.177) black/white PHAP3368A 5,0 mm black/white PHAP3368B 9,5 mm black PHAP3368C 8,0 mm white PHAP3368D 13,0 mm black PHAP3368E 7,3 mm ivory PHAP3368F 8,5 mm grey C 2 4 1 3 9.00 (.354) 4,3 mm L 1.60 (.063) PHAP3368 4.50 (.177) Ø3.50 (.137 DIA) Actuator colour 6.00 (.236) Dim. «L» 9.00 (.354) Model No 0.70 (.027) 0.40 (.016) 6.00 (.236) 1.40 (.055) 3.50 (.137) 1 2 3 4 Operating force : 1,6N ± 0,5N - Travel : 0,25 mm Square actuator 4.50 (.177) PHAP3368T 2.40 (.094) 6.00 (.236) 2 4 1 3 9.00 (.354) 2.40 (.094) 4.50 (.177) 1.60 (.063) Model No 7.40 (.291) 6.00 (.236) 9.00 (.354) 0.70 (.027) 0.40 (.016) 1.40 (.055) 3.60 (.142) 1 2 3 4 Operating force : 1,6N ± 0,5N - Travel : 0,25 mm APEM 12.00 (.472) www.apem.com 0.30 (.012) 4.00 (.157) 4 1 3 0.80 (.034) 2 4.40 (.173) 4.50 (.177) 1.20 (.047) 6.40 (.252) 7.40 (.291) 4.40 (.173) Operating force : 1,6N ± 0,5N - Travel : 0,25 mm Quantity per reel : 650 pieces 2 3 7.00 (.275) 4.50 (.177) 3.20 (.126) 1.90 (.074) 0.70 (.027) 1 14.00 (.551) 3.40 (.133) Model No PHAP3305ASR Ø3.50 (.137 DIA) 1.00 (.039) 4.50 (.177) 0.30 MAXI (.012 MAXI) Edge of PCB mounting 4 Ø2.30 (.090 DIA) C-11 PHAP33 series Through-hole tact switches Microminiature - 6 x 3,5 mm case • Ultra-compact size for board space saving : 6 x 3,5 mm case, 4,3 or 5 mm button height from PCB • Crimped terminals for direct mounting onto PCB • Moulded-in terminals for wave soldering Straight terminals 4,3 mm PHAP3362A 5,0 mm 1.00 (.039) 3.50 (.138) 0.30 (.012) 6.50 (.256) PHAP3362 3.50 (.138) 0.30 (.012) 1 Ø1.25 (.049 DIA) L Dim. «L» 3.00 (.118) 2 6.50 (.256) 3.50 (.138) Model No 2.80 (.110) 1.50 (.059) 1.80 (.071) C 0.70 (.028) 6.00 (.236) 7.90 (.311) 2 1 Operating force : 1,8N ± 0,5N - Travel : 0,25 mm 3.72 (.146) 2.50 (.098) 2.50 (.098) 4.30 (.169) 1.00 (.039) 0.50 (.020) 5.00 (.197) 2.50 (.098) Ø1.00 (.039 DIA) 3 4 0.30 (.012) 1 2 5.00 (.197) PHAP3363 0.30 (.012) 5.90 (.232) 7.00 (.276) Model No 1.45 (.057) 2.50 (.098) 1.50 (.059) Horizontal mounting Ø1.30 (.051 DIA) 7.00 (.276) 1 2 3 4 Operating force : 1,8N ± 0,5N - Travel : 0,25 mm C-12 www.apem.com APEM PHAP33 series Through-hole tact switches 6 x 6 mm case • 4,3 to 13 mm button height from PCB • Excellent tactile feedback (snap dome) • Crimped terminals for direct mounting onto PCB • With or without grounding tab for protection ag. electrostatic discharges • Moulded-in terminals for wave soldering • Caps for model with square actuator (L = 2,4 mm) : Cap colours : 1 : blue - 2 : black - 3 : green 5 : yellow - 6 : red - 7 : ivory Ø4.50 (.177 DIA) 5.50 (.217) 4.00 (.157 SQ) 5.50 (.217) 2.80 (.110) 2.80 (.110) U5520 square U5530 round Straight terminals 4,3 mm black PHAP3301A 5,0 mm black PHAP3301B 9,5 mm black PHAP3301C 8,0 mm white PHAP3301D 13,0 mm black PHAP3301E 7,3 mm ivory PHAP3301F 8,5 mm grey 3.50 (.137) L 6.00 (.236) 4.50 (.177) 2 3 Ø1.00 (.039 DIA) 1 0.50 (.019) 1.80 (.070) C 4 6.50 (.255) PHAP3301 4.50 (.177) 0.70 (.027) Ø3.50 (.137 DIA) Actuator colour 6.50 (.255) 0.30 (.011) Dim. «L» 6.00 (.236) Model No 3.60 (.141) 1 2 3 4 Operating force : 1,6N ± 0,5N - Travel : 0,25 mm Straight terminals - with grounding tab 9,5 mm black PHAP3302C 8,0 mm white PHAP3302D 13,0 mm black PHAP3302E 7,3 mm ivory 6.00 (.236) 2 4 5 3 Ø1.00 (.039 DIA) 1 0.50 (.019) 1.80 (.070) 3.60 (.141) = = PHAP3302B 4.50 (.177) 6.50 (.255) black L Ø3.50 (.137 DIA) 5,0 mm 3.50 (.137) 0.30 (.011) PHAP3302A 0.70 (.027) 6.50 (.255) black 0.70 (.027) Actuator colour 4,3 mm 6.00 (.236) Dim. «L» PHAP3302 6.35 (.250) 4.50 (.177) 1.50 (.059) Model No 6.35 (.250) 1 2 3 4 5 Operating force : 1,6N ± 0,5N - Travel : 0,25 mm Straight terminals - square actuator 4.50 (.177) 7.50 3.50 (.137) (.295) PHAP3303 2,4mm blue PHAP3303A 2,8 mm black 6.00 (.236) 2 4 1 3 Ø1.00 (.039 DIA) 6.50 (.255) Actuator colour 4.50 (.177) L Dim. «L» 6.00 (.236) Model No 6.50 (.255) 0.30 (.011) 0.70 (.027) 1.80 (.070) 3.60 (.141) 0.50 (.019) 1 2 3 4 Operating force : 1,6N ± 0,5N - Travel : 0,25 mm APEM www.apem.com C-13 PHAP33 series Through-hole tact switches 6 x 6 mm case Horizontal mounting black PHAP3305B 8,35 mm black PHAP3305C 6,85 mm white PHAP3305D 11,85 mm black PHAP3305E 6,15 mm ivory PHAP3305T 6,15 mm blue 2.4 x 2.4 0.70 (.027) 2 1.00 0.40 (.015) (.039) 2.50 (.098) 4.50 (.177) 7.00 (.275) 1 7.00 (.275) 3,85 mm 2.50 (.098) 3 4.50 (.177) PHAP3305A 7.40 (.291) Ø3.50 (.137 DIA) black 3.50 7.20 (.137) (.283) Actuator colour 3,15 mm 4.20 (.165) Model No 1.80 (.070) Dim. «L» PHAP3305 4 Ø1.00 (.039 DIA) 0.30 (.011) L 1 2 3 4 Operating force : 1,6N ± 0,5N - Travel : 0,25 mm Horizontal mounting of 2 tact switches PHAP3306B 8,35 mm black PHAP3306C 6,85 mm white PHAP3306D 11,85 mm black 6,15 mm 0.30 (.012) 0.60 (.024) 2.00 (.079) L ivory 6.00 (.236) 7.50 (.295) Long straight terminals + tape 7,0 mm 4 2 3 L 3.60 (.142) 0.30 (.012) 2.60 (.102) PHAP3307G 18.00 (.709) 5,0 mm 0.50 (.020) PHAP3307A 6.10 (.240) 9.00 (.354) 4,3 mm 0.70 (.028) 0.50 (.020) Ø1.00 (.039 DIA) 1 5.00 (.197) 18.00 (.709) PHAP3307 1 Ø3.50 (.138 DIA) 12.70 (.500) Dim. «L» Ø0.80 (.031 DIA) 8.00 (.315) 10.55 (.415) Operating force : 1,6N ± 0,5N - Travel : 0,25 mm Model No 0.40 (.016) 1.00 (.039) 6.10 (.240) PHAP3306E 1 2 3 4 6.00 (.236) black 2 6.35 (.250) Ø4.00 (.157 DIA) 2 1 12.70 (.500) Operating force : 1,6N ± 0,5N - Travel : 0,25 mm Quantity per tape : 1.000 pieces 5.00 (.197) black 3,85 mm 2.00 (.079) 3,15 mm PHAP3306A Ø1.30 (.051 DIA) 4.50 (.177) 8.00 (.315) PHAP3306 3.00 (.118) 12.50 (.492) Actuator colour 8.40 (.331) 6.10 (.240) C Dim. «L» 22.60 (.890) Model No 5.60 (.220) Straight terminals + LED red 15mA 2,1V PHAP3308G green 30mA 2,2V PHAP3308Y yellow 30mA 2V 0.40 (.016) 6.50 (.256) 7.20 (.283) 6.50 (.256) 2.40 (.094) 0.20 (.008) 0.70 (.028) 0.18 (.007) 4.50 (.177) 1 4 2 3 5 2.00 (.079) PHAP3308R 3.60 (.142) 0.40 (.016) - 4.10 (.161) 1.50 (.059) - 6.40 (.252) 4.20 5.80 (.165) (.228) - LED Vf 2.70 (.106) PHAP3308 LED colour LED If 1.20 (.047) Model No 2.50 (.098) Ø0.80 (.031 DIA) 6 6.20 (.244) Ø1.00 (.039 DIA) 1 2 3 4 5 6 4.50 (.177) 6.20 (.244) Operating force : 1,6N ± 0,5N - Travel : 0,25 mm C-14 www.apem.com APEM PHAP33 series Through-hole tact switches Sealed - 7,2 x 7,2 mm or 10 x 10 mm case • Dust and splash proof • Crimped terminals for direct mounting onto PCB • With or without grounding tab for protection against electrostatic discharges • Moulded-in terminals for wave soldering 7,2 x 7,2 mm case - straight terminals - grounding or not 13,0 mm Non grounding Dim. «L» PHAP3351 5,0 mm PHAP3351A 9,0 mm PHAP3351B 13,0 mm 1 5 3 2 4 7.90 (.311) PHAP3350B 7.20 (.283) 9,0 mm 7.60 (.299) PHAP3350A 7.90 (.311) 5,0 mm 9.10 (.358) Dim. «L» 7.20 (.283) 0.70 (.027) Ø3.00 (.118 DIA) Grounding PHAP3350 2.60 (.102) 1.00 (.039) L 5.00 (.197) 5.00 (.197) 3.90 (.154) 1 2 3 4 5 Operating force : 2N ± 0,3N - Travel : 0,50 mm 7,2 x 7,2 mm case - right angle terminals 5.60 (.220) 8.00 (.315) PHAP3352B 12,35 mm 8.00 (.315) L 2.50 (.098) 3.00 (.118) 4 7.80 (.307) 8,35 mm 3.50 (.138) PHAP3352A Ø3.00 (.118 DIA) 4,35 mm PHAP3352 2.50 (.098) 4.00 (.157) Dim. «L» 0.60 (.024) Model No 5.00 (.197) 3 Ø1.00 (.039 DIA) Ø1.10 (.043 DIA) 7.80 (.307) 2 1 5.00 (.197) 3.50 (.138) 1 2 3 4 8.90 (.350) Operating force : 2N ± 0,3N - Travel : 0,50 mm 0.70 (.028) 0.30 (.012) 4 1 3 6.00 (.236) 10.30 (.406) 13.00 (.512) 2 10.30 (.406) 11.70 (.461) 1.80 (.071) 10.00 (.394) 6.00 (.236) 3.50 (.138) 8.00 (.315) Model No PHAP3353 10.00 (.394) 10 x 10 mm case - straight terminals 1 2 3 4 Ø3.80 (.150 DIA) 10.00 (.394) Ø1.00 (.039 DIA) 1 2 3 4 Operating force : 1,6N ± 0,5N - Travel : 0,50 mm APEM www.apem.com C-15 C PHAP33 series Through-hole tact switches 12 x 12 mm case • 4,3 to 12 mm button height from PCB • Excellent tactile feedback (snap-dome) • Crimped terminals for direct mounting onto PCB • Moulded-in terminals for wave soldering • Caps for model PHAP3321 : 5.70 (.224) Cap colours : 1 : blue - 2 : black - 3 : green 5 : yellow - 6 : red - 7 : ivory Ø11.50 (.453 DIA) 2.00 (.079) 12.00 (.472) 4.00 (.157) R=1.00 (R.039) 1.50 (.059) 1.50 (.059) R=1.00 (R.039) 12.00 (.472) U5540 square Ø13.00 (.512 DIA) U5550 round Straight terminals - short actuator 4.00 (.157) 0.3 1.00 X (.039) (.012) 3.50 (.138) C 5.00 (.197) PHAP3320A 7,5 mm 3 12.50 (.491) 4,3 mm 12.00 (.472) PHAP3320 14.10 (.555) Dim. «L» 12.50 (.491) Model No Ø6.70 (.263 DIA) 1 4x 2 L 5.00 (.197) 1.80 (.071) 1.20 (.047) 4 1 3 2 4 12.00 (.472) Operating force : 1,6N ± 0,5N - Travel : 0,30 mm Straight terminals - long keyed actuator 12.00 (.472) 3.50 (.138) 8.00 (.315) 0.3 1.00 X (.039) (.012) 1.20 (.047) 5.00 (.197) 0.30 (.012) 3 12.50 (.491) 12.00 (.472) 14.10 (.555) 12.50 (.491) Model No PHAP3320B 6.00 (.236) 1 4x 1.00 (.039) 2 1.80 (.071) 4.00 (.157) 5.00 (.197) Ø4.00 (.157 DIA) 1.20 (.047) 4 1 3 2 4 12.00 (.472) Operating force : 1,6N ± 0,5N - Travel : 0,30 mm Straight terminals - square actuator 4.00 (.157) 0.3 1.00 X (.039) (.012) 3.80 (.150) 3.50 (.138) 1.80 (.071) 4x 2 7.30 (.287) 1.80 (.071) 5.00 (.197) 3 12.50 (.491) 12.00 (.472) 14.10 (.555) 12.50 (.491) 1 Model No PHAP3321 5.00 (.197) 1.20 (.047) 4 1 3 2 4 12.00 (.472) Operating force : 1,6N ± 0,5N - Travel : 0,30 mm C-16 www.apem.com APEM