Surface Mount LED, 0428 Series 1.8 mm Round The 0420 series lamps are miniature lens type designed for surface mounting. The high intensity is achieved by molding a focusing lens onto the substrate. These lamps measure approximately 2.4 x 3.2 mm. These lamps are available in EIA481 tape and reel packaging by specifying the series number is 0428. 3.2 2.4 + - 1.8Ø 2.6 AAA AA AA AAA AAAAA 2.5 2.0 2.0 2.5 2.5 Suggested pad dimensions for reflow soldering GENERAL INFORMATION Operating Temperature Range Storage Temperature Range Reflow Soldering Temperature -40 °C to +85 °C -40 °C to +90 °C 260 °C for 5 sec max APPLICATION INFORMATION (ALL RATINGS AT 25 °C AMBIENT) Peak Part No. Emitted Color λ Absolute Maximum Ratings ∆λ Pd If (mA) Ir E/O Characteristics Vf (V) @If=20mA Vr Iv (mcd) @ If=20mA 2Θ1/2 (nM) (nM) (mW) dc 1/10 duty @ 1 khz @Vr=5V (µA) (V) Min Typ Max Min Typ (Deg) Red 660 20 100 30 200 100 5 – 1.7 2.4 114 190 30 IVRC0428 Red 640 45 70 25 90 100 5 – 2.0 2.8 23 39 30 IVYC0428 Yellow 585 35 70 20 90 100 5 – 2.0 2.8 35 58 30 IVGC0428 Green 570 30 70 25 90 100 5 – 2.1 2.8 73 122 30 IURC0428* Red 660 20 100 30 200 100 5 – 1.7 2.4 290 484 30 ISRC0428 IUGC0428 Green 570 30 70 30 160 100 5 – 2.1 2.8 75 125 30 IUYC0428 Yellow 590 15 70 30 160 100 5 – 2.1 2.8 346 606 30 IUBC0428 Blue 428 65 140 30 70 50 5 - 3.8 4.5 89 112 30 IUBC0428-7 Blue 468 26 140 30 70 50 5 - 3.5 4.0 118 150 30 Specifications subject to change without notice. Dimensions are in mm±0.3 unless stated otherwise. *reversed polarity IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 0508 013S-0428 L–8