Surface Mount LED J Series for low current or superbright use, 0128 Series Right Angle Lens The 0128 series lamps are miniature chip type designed for two-way surface mounting. Mounted normally, these lamps can be used as circuit board status indicators or as backlight for switches or key pads. Mounted at right angles these lamps are miniature through the panel indicators. These lamps are in EIA481 tape and reel packaging with approximately 2000 pcs per reel. 1±0.2 3±0.2 2.0 + 1.0 AA AA AA AA 1.8 1.0 0.4 x 2 1.0 1.0 Suggested pad dimensions for reflow soldering Cathode Marking GENERAL INFORMATION Operating Temperature Range Storage Temperature Range Reflow Soldering Temperature -40 °C to +85 °C -40 °C to +90 °C 260 °C for 5 sec max APPLICATION INFORMATION (ALL RATINGS AT 25 °C AMBIENT) Peak Part No. Emitted Color λ Absolute Maximum Ratings ∆λ Pd If (mA) Ir E/O Characteristics Iv (mcd) @If=20mA Vr Vf (V) @ If=20mA 2Θ1/2 (nM) (nM) (mW) dc 1/10 duty @ 1 khz @Vr=5V (µA) (V) 2mA Min Typ Min Typ (Deg) JRC0128 Red 632 20 60 25 160 10 5 3 19 47 2.0 2.4 120 JGC0128 Green 575 20 60 25 160 10 5 1 13 19 2.0 2.4 120 JYC0128 Yellow 591 15 60 25 160 10 5 3 19 48 2.0 2.4 120 JOC0128 Orange 621 18 60 25 160 10 5 3 19 48 2.0 2.4 120 JEC0128 OrRed 639 20 60 25 160 10 5 2 18 38 2.0 2.4 120 JYOC0128 YelOrng 611 17 60 25 160 10 5 3 19 48 2.0 2.4 120 Specifications subject to change without notice. Dimensions are in mm±0.3 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 0508 J–2 013S-J0128