+125°C Standard Radial Lead Aluminum Electrolytic Capacitors HSM For automotive and telecommunication applications FEATURES 125°C Temperature rating Extended Life Voltage range: 10 WVDC to 63WVDC Capacitance Range: 1.0µF to 4,700µF SPECIFICATIONS Capacitance Tolerance ±20% at 120Hz, 20°C Operating Temperature Range -40°C to +125°C Dissipation Factor 120Hz, 20°C WVDC 10 16 25 35 50 63 tan δ .2 .16 .14 .12 .1 .1 Note: For above D.F. specifications, add .02 for every 1,000 µf above 1,000 µf Impedance Ratio (Max.) @120Hz WVDC 10 16 25 35 50 63 -25/20°C 3 2 2 2 2 2 -40/20°C 4 4 4 4 4 4 ≤ 63WVDC WVDC Leakage Current Time 1 minute 2 minutes .03 CV or 4 µA .01 CV or 3 µA Whichever is greater 1,000 hours at 125°C with rated WVDC Load Life < 20% of initial measured value <200% of initial specified value <100%Initial specified value Capacitance change Dissipation factor Leakage current 1,000 hours at 105°C with no voltage applied. Units will meet load life specification. Shelf Life Frequency(Hz) Ripple Current Multipliers Capacitance (µF) C≤47 +105 1.00 +85 1.4 +70 1.65 1.34 1.5 1.00 1.4 1.65 1.13 1.15 1.00 1.4 1.65 120 1.0 300 1.35 1K 1.57 47<C≤470 .8 1.0 1.23 C>470 .85 1.0 1.1 SPECIAL ORDER OPTIONS • Special tolerances: ±10% (K), -10% + 30% (Q) • Temperature(°C) 10K 2 50 .75 (See pages 33 thru 37) Tape and Reel/Ammo Pack • Cut, Formed, Cut and Formed, and Snap In Leads ® 3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com + 125°C Standard Radial Lead Aluminum Electrolytic Capacitors HSM PHYSICAL DIMENSIONS (µF) WVDC (SV) 10 (13) 16 (20) 25 (32) 35 (44) 50 (63) 1 8x11.5 2.2 8x11.5 3.3 8x11.5 4.7 8x11.5 10 8x11.5 22 8x11.5 33 8x11.5 47 100 8x11.5 220 8x11.5 330 63 (79) 8x11.5 10x12.5 10x12.5 10x16 10x12.5 10x16 10x20 12.5x20 10x16 10x20 12.5x20 12.5x25 16x25 10x12.5 470 10x12.5 10x16 10x20 12.5x20 12.5x25 1000 10x20 12.5x20 12.5x25 16x25 16x31.5 2200 12.5x25 16x25 16x31.5 3300 16x25 16x31.5 4700 16x31.5 DxL(mm) 15.0 MIN LEAD INFORMATION V.S. CASE DIAMETER PVC SLEEVE Convert to inches, divide by 25.4. d - 10.0 12.5 16 3.5 5.0 5.0 7.5 d 0.6 0.6 0.6 0.8 B 0.5 0.5 0.8 0.5 D1 19.0 MIN 8.0 S L1=L+2.0mm Max. D1=D+B Max. S1=S±0.5mm + L1 S1 D NOTE: Case Vent is standard on all diameter ≥8.0mm ® 3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com HSM + 125°C Standard Radial Aluminum Electrolytic Capacitors STANDARD PART LISTING Capacitance (µF) WVDC PART NUMBER Maximum ESR Ω 120Hz,+20°C Maximum RMS Ripple Current (mA) 120Hz,+125°C Dimension DxL (mm) Capacitance (µF) WVDC PART NUMBER Maximum ESR Ω 120Hz,+20°C Maximum RMS Ripple Current (mA) 120Hz,+125°C Dimension DxL (mm) 1 50 105HSM050M 165.786 10 8x11.5 330 50 337HSM050M 0.502 430 12.5x20 2.2 50 225HSM050M 75.357 22 8x11.5 330 63 337HSM063M 0.502 480 12.5x25 3.3 50 335HSM050M 50.238 27 8x11.5 470 10 477HSM010M 0.705 270 10x12.5 4.7 50 475HSM050M 35.274 32 8x11.5 470 16 477HSM016M 0.564 330 10x16 10 50 106HSM050M 16.579 47 8x11.5 470 25 477HSM025M 0.494 390 10x20 22 50 226HSM050M 7.536 70 8x11.5 470 35 477HSM035M 0.423 470 12.5x20 33 50 336HSM050M 5.024 85 8x11.5 470 50 477HSM050M 0.353 570 12.5x25 47 50 476HSM050M 3.527 105 8x11.5 470 63 477HSM063M 0.353 650 16x25 47 63 476HSM063M 3.527 120 10x12.5 1000 10 108HSM010M 0.332 470 10x20 100 25 107HSM025M 2.321 125 8x11.5 1000 16 108HSM016M 0.265 590 12.5x20 100 50 107HSM050M 1.658 180 10x12.5 1000 25 108HSM025M 0.232 700 12.5x25 100 63 107HSM063M 1.658 200 10x16 1000 35 108HSM035M 0.199 850 16x25 220 10 227HSM010M 1.507 155 8x11.5 1000 50 108HSM050M 0.166 1030 16x31.5 220 25 227HSM025M 1.055 220 10x12.5 2200 10 228HSM010M 0.181 820 12.5x25 220 35 227HSM035M 0.904 260 10x16 2200 16 228HSM016M 0.151 1030 16x25 220 50 227HSM050M 0.754 320 10x20 2200 25 228HSM025M 0.136 1210 16x31.5 220 63 227HSM063M 0.754 360 12.5x20 3300 10 338HSM010M 0.131 1090 16x25 330 16 337HSM016M 0.804 250 10x12.5 3300 16 338HSM016M 0.111 1330 16x31.5 4700 10 478HSM010M 0.099 1390 16x31.5 330 25 337HSM025M 0.703 300 10x16 330 35 337HSM035M 0.603 350 10x20 ® 3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com