+125°C Axial Lead Aluminum Electrolytic Capacitors HST For all general purpose and high temperature applications FEATURES 125°C Temperature rating Capacitance Range: 1.0 µF to 4,700 µF Voltage Range: 10 WVDC to 63 WVDC Extended Life SPECIFICATIONS Capacitance Tolerance ±20% at 120Hz, 20°C Operating Temperature Range -40°C to +125°C Dissipation Factor 120Hz, 20°C WVDC 10 16 25 35 50 63 tan δ .2 .16 .14 .12 .1 .1 Note: For above D.F. specifications, add .02 for every 1,000 µf above 1,000 µf Impedance Ratio (Max.) @120Hz Leakage Current WVDC 10 16 25 35 50 63 -25°C/20°C 3 2 2 2 2 2 -40°C/20°C 4 4 4 4 4 4 WVDC ≤ 63 WVDC ≤ 63 WVDC Time 1 minute 2 minutes .03 CV or 4µA .01 CV or 4µA whichever is greater whichever is greater 2,000 hours (1,000 hours D=8mm) at +125°C with rated WVDC Load Life ≤ 20% of initial measured value ≤ 200% of initial specified value ≤100% specified value Capacitance change Dissipation factor Leakage current 1,000 hours at +105°C with no voltage applied. Units will meet load life specifications Shelf Life Frequency (Hz) Ripple Current Multipliers Capacitance (µF) C≤47 470<C≤470 50 .75 120 300 1.0 1.35 .8 1.0 1.34 C>470 .85 1.0 1.1 SPECIAL ORDER OPTIONS • Special tolerances: ±10% (K), -10% + 30% (Q) 1K 1.57 10K 2 1.34 1.13 1.15 1.5 (See pages 33 thru 37) • Tape and Reel/Ammo-Pack • Cut, Formed, Cut and Formed, and Snap In Leads ® 3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com HST + 125°C Axial Lead Aluminum Electrolytic Capacitors PHYSICAL DIMENSIONS WVDC (SV) 10 (13) µF 16 (20) 25 (32) 35 (44) 50 (63) 1 63 (79) 8x16 2.2 8x16 3.3 - 8x16 4.7 8x16 10 8x16 22 8x16 33 8x16 47 100 8x16 220 8x16 330 8x16 8x20 8x20 10x21 8x20 10x21 10x26 12.5x26 8x20 10x21 10x26 12.5x26 12.5x31 16x31 470 8x20 10x21 10x26 12.5x26 12.5x31 1000 10x26 12.5x26 12.5x31 16x31 16x41 2200 12.5x31 16x31 16x41 3300 16x31 16x41 4700 16x41 Convert to inches, divide by 25.4 DxL (mm) PVC SLEEVE d + 35.0 MIN L1 35.0 MIN D1 LEAD INFORMATION VS. CASE DIAMETER D 8.0 10.0 12.5 16.0 d 0.6 0.6 0.8 0.8 B 0.5 0.5 0.5 0.5 D1=D+B Max. L1= L+2 Max. NOTE: Case Vent is standard on all diameter ≥8.0mm ® 3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com HST + 125°C Axial Lead Aluminum Electrolytic Capacitors STANDARD PART LISTING Capacitance WVDC (µF) PART NUMBER Maximum Maximum RMS Dimension Ripple Current ESR DxL (mA) Ω (mm) 120Hz,+20°C 120Hz,+125°C Capacitance WVDC (µF) PART NUMBER Maximum Maximum RMS Dimension Ripple Current ESR DxL (mA) Ω (mm) 120Hz,+20°C 120Hz,+125°C 1 50 105HST050M 165.786 10 8x16 330 50 337HST050M 0.502 430 12.5x26 2.2 50 225HST050M 75.357 22 8x16 330 63 337HST063M 0.502 480 12.5x31 3.3 50 335HST050M 50.238 27 8x16 470 10 477HST010M 0.705 270 8x20 4.7 50 475HST050M 35.274 32 8x16 470 16 477HST016M 0.564 330 10x21 10 50 106HST050M 16.579 47 8x16 470 25 477HST025M 0.494 390 10x26 22 50 226HST050M 7.536 70 8x16 470 35 477HST035M 0.423 470 12.5x26 12.5x31 33 50 336HST050M 5.024 85 8x16 470 50 477HST050M 0.353 570 47 50 476HST050M 3.527 105 8x16 470 63 477HST063M 0.353 650 16x31 47 63 476HST063M 3.527 120 8x20 1000 10 108HST010M 0.332 470 10x26 100 25 107HST025M 2.321 125 8x16 1000 16 108HST016M 0.265 590 12.5x26 100 50 107HST050M 1.658 180 8x20 1000 25 108HST025M 0.232 700 12.5x31 100 63 107HST063M 1.658 200 10x21 1000 35 108HST035M 0.199 850 16x31 220 10 227HST010M 1.507 155 8x16 1000 50 108HST050M 0.166 1030 16x41 220 25 227HST025M 1.055 220 8x20 2200 10 228HST010M 0.181 820 12.5x31 220 35 227HST035M 0.904 260 10x21 2200 16 228HST016M 0.151 1030 16x31 220 50 227HST050M 0.754 320 10x26 2200 25 228HST025M 0.136 1210 16x41 220 63 227HST063M 0.754 360 12.5x26 3300 10 338HST010M 0.131 1090 16x31 330 16 337HST016M 0.804 250 8x20 3300 16 338HST016M 0.111 1330 16x41 330 25 337HST025M 0.703 300 10x21 4700 10 478HST010M 0.099 1390 16x41 330 35 337HST035M 0.603 350 10x26 ® 3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com