+85°C 7mm Height Low Profile Radial Lead Aluminum Electrolytic Capacitors PUM For all general purpose applications FEATURES Very small size Capacitance range: 4.7 µF to 220 µF Voltage range: 6.3 WVDC to 50 WVDC Solvent tolerant end seals standard SPECIFICATIONS Capacitance Tolerance ±20% at 120Hz, 20°C Operating Temperature Range -40°C to +85°C Dissipation Factor 120Hz, 25°C Impedance Ratio (Max.) @120Hz Leakage current WVDC 6.3 10 16 25 35 50 tan δ .24 .20 .16 .14 .12 .10 WVDC 6.3 10 16 25 35 50 -25/20°C -40/20°C 4 3 2 2 2 2 10 8 6 4 4 4 WVDC ≤50 WVDC Time 2 minutes .01 CV or 3 µA whichever is greater 2,000 hours at 85°C with rated WVDC Capacitance change Dissipation factor Leakage current Load Life < 20% of initial measured values <200% of initial specified value <Initial specified value 1,000 hours at 85°C with no voltage applied. Units will meet load life specifications. Shelf Life Frequency (Hz) Ripple Current Multipliers 50 0.8 120 1.0 SPECIAL ORDER OPTIONS • Special tolerances: ±10% (K), -10% + 30% (Q) 400 1.3 1K 1.45 Temperature (°C) 10K 1.65 100K 1.7 +85 1.0 +70 1.3 +60 1.5 +30 1.8 (See pages 33 thru 37) • Tape and Reel/Ammo-Pack • Cut, Formed, Cut and Formed, and Snap In Leads ® 3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com 48 + 85°C 7mm Height Low Profile Radial Lead Aluminum Electrolytic Capacitors PUM STANDARD PART LISTING Maximum ESR Ω 120Hz,+20°C Maximum RMS Ripple Current (mA) 120Hz,+85°C Dimensions DxL (mm) Capacitance (µF) 475PUM050M 35.274 23 4x7 33 50 685PUM035M 29.256 24 4x7 47 6.3 50 685PUM050M 24.380 27 5x7 47 16 10 35 106PUM035M 19.894 31 4x7 47 25 10 50 106PUM050M 16.579 37 5x7 47 35 15 35 156PUM035M 13.263 39 5x7 68 6.3 15 50 156PUM050M 11.052 43 6.3x7 68 16 4x7 100 6.3 16 Capacitance (µF) WVDC 4.7 50 6.8 35 6.8 22 16 PART NUMBER 226PUM016M 12.057 40 Maximum RMS Ripple Current (mA) 120Hz,+85°C Dimensions DxL (mm) 336PUM050M 5.024 95 8x7 476PUM6R3M 8.466 46 4x7 476PUM016M 5.644 64 5x7 476PUM025M 4.938 74 6.3x7 476PUM035M 4.233 100 8x7 686PUM6R3M 5.851 58 5x7 686PUM016M 3.901 76 6.3x7 107PUM6R3M 3.979 76 5x7 107PUM016M 2.653 100 6.3x7 140 8x7 22 35 226PUM035M 9.043 50 5x7 100 22 50 226PUM050M 7.536 59 6.3x7 100 25 107PUM025M 2.321 22 50 226PUM050MD8 7.536 75 8x7 150 6.3 157PUM6R3M 2.653 90 6.3x7 33 10 336PUM010M 10.048 44 4x7 220 6.3 227PUM6R3M 1.809 115 6.3x7 5x7 220 16 227PUM016M 1.206 190 8x7 6.3x7 330 6.3 337PUM6R3M 1.206 190 8x7 33 25 33 35 336PUM025M 7.033 336PUM035M 6.029 57 67 Aluminum Electrolytic Maximum ESR Ω 120Hz,+20°C PART NUMBER WVDC PHYSICAL DIMENSIONS WVDC (SV) 16 (20) 25 (32) 35 (44) 50 (63) 6.8 4x7 5x7 10 4x7 5x7 10 (13) 6.3 (8) (µF) 4x7 4.7 5x7 6.3x7 5x7 6.3x7, 8x7 5x7 6.3x7 8x7 6.3x7 8x7 15 4x7 22 4x7 33 47 4x7 5x7 68 5x7 6.3x7 100 5x7 6.3x7 150 6.3x7 220 6.3x7 330 8x7 8x7 8x7 DxL (mm) 15.0 MIN PVC SLEEVE Convert to inches, divide by 25.4 d LEAD INFORMATION V.S. CASE DIAMETER + 19.0 MIN 1 L D 1 S 1 D 4 5 6.3 8 S 1.5 2.0 2.5 3.5 d .45 .45 .45 .50 L1= L+1mm Max. S1= S±.5mm D1= D+.5mm Max. ® 3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com 49