ITF F1G95

SAW Bandpass Filter F1G95
Features
z
US-PCS applications
z
Usable bandwidth of 30 MHz
z
No impedance matching require for operation at 50 Ω
z
SMD Package 2.0 mm × 1.6 mm× 0.7 mm
z
Single-ended Operation
z
RoHS Compliant
Package Dimensions
4
3
3
1
2
2
4
1
Pin Configurations
1
Input
2
Case Ground
3
Output
4
Case Ground
Maximum Ratings
Parameters
Unit
Minimum
Typical
Maximum
Operating Temperature Range
℃
-30
25
85
Storage Temperature Range
℃
-30
-
85
Power Handling Capability
dBm
-
-
13
Electrostatics Sensitive Device (ESD)
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F1G95
Rev. Date
2007-08-30
Rev.
NC7006-AS01
1/7
SAW Bandpass Filter F1G95
Specifications
Minimum
Typical
Maximum
Unit
Center Frequency ( Fc )
-
1960
-
MHz
Insertion Loss (Fo +/- 30 MHz)
-
2.3
2.7
dB
Amplitude Ripple (Fo +/- 30 MHz)
-
0.6
1.7
dBp-p
VSWR (Fo +/- 30 MHz)
-
2.0
2.4
Relative Attenuation
D.C. ~ 1850 MHz
26.0
34.0
-
1850 ~ 1910 MHz
15.0
21.0
-
2010 ~ 2070 MHz
15.0
21.0
-
3860 ~ 3980 MHz
28.0
37.0
-
5790 ~ 5970 MHz
33.0
33.0
-
-30
25
85
℃
13
dBm
Temperature Range (Operational)
Input RF Power (Fo +/- 30 MHz)
Input/Output Impedance
dB
50
Ohms
Notes :
1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and
full 2 port calibration.
2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing
tolerances
3) All attenuation measurements are measured relative to insertion loss
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F1G95
Rev. Date
2007-08-30
Rev.
NC7006-AS01
2/7
SAW Bandpass Filter F1G95
Matching Schematic
( Actual matching values may vary due to PCB layout and parasitics )
Input
50Ω
Output
50Ω
Marking Configuration
1)
AN 2)
A1 3)
1) Index Mark
2) Part Number Mark ( ITF Standard Rule )
3) Lot Number ( ITF Standard Rule )
* Ink or Laser Marking available
* Marking configuration depends on ITF standard rules.
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F1G95
Rev. Date
2007-08-30
Rev.
NC7006-AS01
3/7
SAW Bandpass Filter F1G95
Typical Performance ( at 25℃ )
CH1 S21
LOG
30 Aug 2007 11:56:43
5:-27 . 360 dB 2 010. 000 000 MHz
5 dB/ REF 0 dB
1
2
CH1Markers
1:-2 . 2677 dB
1. 93000 GHz
Cor
2:-2 . 5564 dB
1. 99000 GHz
3:-40 . 858 dB
1. 85000 GHz
4:-25 . 178 dB
5
1. 91000 GHz
4
3
CENTER1 960. 000 000 MHz
CH1 S21
LOG
5 dB/ REF 0 dB
SPAN 300. 000 000 MHz
30 Aug 2007 11:48:26
1:-40 . 189 dB 1 850. 000 000 MHz
CH1Markers
2:-31 . 957 dB
2. 07000 GHz
Cor
2
1
START . 010 000 MHz
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
STOP3 000. 000 000 MHz
Part No.
F1G95
Rev. Date
2007-08-30
Rev.
NC7006-AS01
4/7
SAW Bandpass Filter F1G95
Input / Output VSWR Charts
CH1 S11
SWR
1 /
30 Aug 2007 11:58:57
1: 1. 3673
1 930. 000 000 MHz
REF 1
CH1 S11
5: 4. 0137
1 U FS
-12 . 971
30 Aug 2007 11:58:05
6. 1046 pF
2 010. 000 000 MHz
CH1 Markers
CH1 Markers
2: 2. 1118
1. 99000 GHz
Cor
1: 38. 947
8. 3613
1. 93000 GHz
4
Cor
3
2: 24. 232
-6 . 7568
1. 99000 GHz
3: 2. 2158
21. 878
1. 85000 GHz
4: 11. 420
1
43. 283
1. 91000 GHz
2
5
1
2
CENTER1 960. 000 000 MHz
SPAN 300. 000 000 MHz
CENTER1 960. 000 000 MHz
SPAN 300. 000 000 MHz
Input / Output Smith Charts
CH1 S22
SWR
1 /
30 Aug 2007 11:59:08
1: 1. 2018
1 930. 000 000 MHz
REF 1
CH1 S22
5: 5. 1895
1 U FS
-23 . 845
CH1 Markers
CH1 Markers
2: 2. 0817
1. 99000 GHz
Cor
30 Aug 2007 11:58:20
3. 3207 pF
2 010. 000 000 MHz
4
Cor
1: 53. 461
8. 8262
1. 93000 GHz
3
2: 32. 230
-24 . 344
1. 99000 GHz
3: 2. 4717
21. 015
1. 85000 GHz
4: 12. 385
1
62. 684
1. 91000 GHz
2
5
1
CENTER1 960. 000 000 MHz
2
SPAN 300. 000 000 MHz
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
CENTER1 960. 000 000 MHz
SPAN 300. 000 000 MHz
Part No.
F1G95
Rev. Date
2007-08-30
Rev.
NC7006-AS01
5/7
SAW Bandpass Filter F1G95
Packing Specification
1. Reeling Quantity : 3000 pcs / 13” reel ( or 1000 pcs / 7” reel )
2. Taping Structure : The tape shall be wound around the reel in the direction shown below.
TOP COVER TAPE
REEL
CARRIER TAPE
Tape Specification
1. Leader part and vacant position specification
Vacant
150mm min.
Component
contained
Vacant
150mm min.
Leader part
250mm min.
END
START
Tape Running Direction
2. Tensile strength of carrier tape
4.4N/mm width
Direction of pull
Top cover tape
3. Top cover tape adhesion
0~15 degree
1) pull off angle : 0~15°
2) speed : 300mm/min
3) force : 20~70g
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Carrier tape
Part No.
F1G95
Rev. Date
2007-08-30
Rev.
NC7006-AS01
6/7
SAW Bandpass Filter F1G95
Carrier Tape Dimensions [unit : mm]
Top Cover Tape
Part Direction
Tape Running Direction
Reel Dimensions [unit : mm]
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F1G95
Rev. Date
2007-08-30
Rev.
NC7006-AS01
7/7