JAUCH O52.0-JV75-B-3.3-15-A-T1

Oscillator · VCXO · 3.3 V
SMD Voltage Control Crystal Oscillator · 7.5 x 5.0 mm
General Data
2002/95/EC
RoHS compliant
stability code
type
JV75 3.3 V
frequency range
1.0 ~ 125.0 MHz
B
C
± 50 ppm
± 25 ppm
◆
± 25ppm / ± 50ppm
-10 °C ~ +70 °C
O
O
see table 1
-40 °C ~ +85 °C
O
O
current consumption
see table 2
• standard
supply voltage VDC
3.3 V ± 10%
frequency pulling range min.
± 50ppm / ± 100ppm / ± 150ppm
pulling control voltage
1.65 V ± 1.65 V
pulling linearity max.
± 10%
temperature
operating
-10 °C ~ +70 °C / -40 °C ~ +85 °C
storage
-40 °C ~ +85 °C
rise & fall time
see table 3
load max.
15pF
current max.
4mA
low level max.
0.1 x VDC
high level min.
0.9 x VDC
output
Pb free: pins / pads
Table 1: Frequency Stability Code
frequency stability over all*
◆
RoHS
■ two pinout versions available
■ reflow soldering temperature: 260 °C max.
■ ceramic/metal package
actual size
* includes stability at 25 °C, operating temp. range, supply voltage change, shock and vibration, aging 1st year.
▲
◗
Current at 15pF load:
1.0 ~ 29.9 MHz
30.0 ~ 44.9 MHz
45.0 ~ 51.9 MHz
52.0 ~ 125.0 MHz
15 mA
20 mA
25 mA
35 mA
Table 3: Rise & Fall Time max.
6.0 ns: 1.0 ~ 39.9 MHz
5.0 ns: 40.0 ~ 125.0 MHz
■
yes
start-up time max.
10ms
symmetry at 0.5 x VDC
45% ~ 55% typ. (40% ~ 60% max.)
▲
Table 2: Current Consumption max.
■
standby function
not available > 52.0 MHz
O available
note:
- specific data on request
- rise time: 0.1 VDC ~ 0.9 VDC
- fall time: 0.9 VDC ~ 0.1 VDC
Recommendation
To avoid phase noise or FM modulation in the output frequency spectrum,
we recommend to feed the Vcontrol input pin by a low source impedance.
not available > 80.0 MHz ◗ on request, if < 52.0 MHz
Dimensions
2 x 2.54±0.1
7.5 max.
2 x 2.54±0.1
#1 #2 #3
top view
#1
1.4±0.1
side view
2.0±0.1
4.2±0.1
2.46±0.1
1.8±0.2
5.0±0.2
#6 #5 #4
1.8±0.1
bottom view
standard
pin connection B
# 1: Vcontrol
# 2: e/d
# 3: ground
# 4: output
# 5: nc
# 6: VDD
optional
pin connection A
# 1: Vcontrol
# 2: nc
# 3: ground
# 4: output
# 5: e/d
# 6: VDD
pad layout
in mm
Order Information
O
frequency
in MHz
type
frequency stability
in ppm
supply voltage
in Volt
Oscillator
1.0 ~ 125.0 MHz
JV75
C = ± 25 ppm◆
B = ± 50 ppm
3.3 = 3.3 V
◆
not available > 52.0 MHz
pulling range
in ppm
pin version
option
05 = ±50 ppm
10 = ±100 ppm▲
15 = ±150 ppm ◗
B = standard
A = optional
blank = -10 °C ~ + 70 °C
T1 = -40 °C ~ + 85 °C
▲
◗
Example: O 20.0-JV75-C-3.3-10-B
not available > 80.0 MHz
on request, if < 52.0 MHz
(LF = RoHS compliant / Pb free pins or pads)
Jauch Quartz GmbH • e-mail: [email protected]
full data can be found under: www.jauch.de / www.jauch.fr / www.jauchusa.com
All specifications are subject to change without notice
260209
Oscillator · VCXO · JV75 · 3.3 V
0.4±0.05
17.5
ø 13
2.0
ø 21
ø 1.5±0.1
8.0±0.2
2.3±0.1
5.5 max.
500 pcs per reel
in mm
Direction of feed
Reflow Soldering Profile
temperature (°C)
Marking
frequency
10 s max.
260 °C max.
220 ±5 °C
180 ±5 °C
260
200
150
60 ~180 s
100
60 s max.
50
time (s)
note: parts are also suitable for soldering systems with lead (Pb) content
Control Voltage Characteristic
type / date code
date code:
A ~ M: Jan.- Dec.
9: 2009
0: 2010
1: 2011
Jan.
A
Febr.
B
Mar.
C
Apr.
D
May
E
June
F
July
G
Aug.
H
Sept.
J
Oct.
K
Nov.
L
Dec.
M
Packing Note
3.3 V version
–
–
standard packing units are 500 pieces per reel
non-multiple packing units are only supplied taped / bulk
160
80
40
20
0
-20
-40
-80
0.825
1.65
2.45
control voltage (V)
3.3
frequency pulling range
120
ppm
ø 80
ø 180/255
7.9 max.
9.25±0.1
120°
16.0±0.3
2.0±0.1
4.0±0.1
1.75±0.1
Taping Specification
Enable / Disable Function
pin #2/#5
pin #4
open or ≥ 0.7 VDC
enable
gnd or ≥ 0.3 VDC
high impedance
-120
-160
Jauch Quartz GmbH • e-mail: [email protected]
full data can be found under: www.jauch.de / www.jauch.fr / www.jauchusa.com
All specifications are subject to change without notice