JFW Industries, Inc. Phone: 317-887-1340 [email protected] www.jfwindustries.com SPECIFICATION SHEET JFW MODEL 50PA-393 HANDOVER TEST SYSTEM Frequency Range 800-2200 MHz Configuration 6 x 2 Handover Test System See block diagram 092-5642 Impedance 50 Ohms nominal VSWR 1.6:1 maximum Insertion Loss 19.6 dB nominal Attenuation Range 0-127 dB in 1 dB steps Attenuation Accuracy ± 0.4 dB or 2% of programmed (whichever is greater) Power Divider Isolation 25 dB minimum RF Input Power +20 dBm Switching Speed 5 microseconds typical (after command is received and processed) (3 milliseconds typical processing time) AC Supply 100-240 VAC @ 47-63 Hz Manual Control Keypad and LCD display Remote Control Ethernet (10/100) and RS-232 Remote Commands Set Attenuator Read Attenuator Fade Attenuator Handover Variable Handover Change Baud Rate Identification Baud Rates (RS-232 mode) 9600, 19200, or 38400 Baud RF Connector N female Temperature Range 0ºC to +50ºC Physical Size See outline drawing 092-5643 ECR/ECN # Page 1 of 1 DATE REV APPR / DATE 15916 11/26/2007 05/28/2008 A TRS 11/26/2007 TRS 05/28/2008 16179 08/07/2008 B TRS 08/07/2008 ECR/ECN # JFW FORM E-7-F REV F DATE (SAx y <CR>) (RAx <CR>) (FAx y z t <CR>) (HNDx y t) (VHND Av Aw Vx Vy Tz) (CBx <CR>) (IDN <CR>) REV APPR / DATE