JFW 50PA-420

JFW Industries, Inc.
Phone: 317-887-1340
[email protected]
www.jfwindustries.com
SPECIFICATION SHEET
JFW MODEL 50PA-420
LC HANDOVER TEST SYSTEM
Frequency Range
800-2200 MHz
Configuration
8 x 2 LC Handover Test System
(See block diagram 092-5588)
Impedance
50 Ohms nominal
VSWR
1.5:1 maximum
Attenuation Range
0-127 dB in 1 dB steps
Attenuation Accuracy
± 0.4 dB or 2% of programmed
(whichever is greater)
Insertion Loss
(ANT1-ANT8 to J1 or J2)
15.5 dB nominal at 800 MHz
18.5 dB nominal at 2200 MHz
Power Divider Isolation
25 dB minimum
RF Input Power
+20 dBm average
+30 dBm (no damage)
Switching Speed
5 microseconds typical
(after command is received and processed)
(3 milliseconds typical processing time)
AC Supply
100-240 VAC @ 47-63 Hz
Manual Control
Keypad and LCD display
Remote Control
Ethernet (10/100) and RS-232
Remote Commands
Variable Handover
Feedback Handover
Fade Attenuator
Feedback Fade
Pause
Set Attenuator
Read Attenuator
Change Baud Rate
Identification
RF Connector
SMA or N female
Operating Temperature Range
0ºC to +50ºC
--CONTINUED-Page 1 of 2
JFW FORM E-7-F REV F
(VHND Av Aw Vx Vy Tz)
(FHND Av Aw Vx Vy Tz)
(FAx y z t)
(FFAx y z t)
(PAUSEx)
(SAx y)
(RAx)
(CBx)
(IDN)
JFW Industries, Inc.
Phone: 317-887-1340
[email protected]
www.jfwindustries.com
SPECIFICATION SHEET
JFW MODEL 50PA-420
LC HANDOVER TEST SYSTEM
Physical Size
ECR/ECN #
Page 2 of 2
DATE
See outline drawing 092-5589
REV
APPR / DATE
15916
04/30/2008
05/28/2008
A
TRS 04/30/2008
TRS 05/28/2008
15969
06/04/2008
B
TRS 06/04/2008
ECR/ECN #
16179
JFW FORM E-7-F REV F
DATE
08/07/2008
REV
C
APPR / DATE
TRS 08/07/2008