JFW Industries, Inc. Phone: 317-887-1340 [email protected] www.jfwindustries.com SPECIFICATION SHEET JFW MODEL 50PMA-015 TRANSCEIVER TEST SYSTEM Frequency Range 1000-2000 MHz Configuration 4 Port Transceiver Test System (See block diagram 092-5093) Impedance 50 Ohms nominal Attenuation Range 0-127 dB in 1 dB steps Attenuation Steps 1, 2, 4, 8, 16, 32, and 64 dB VSWR 1.6:1 maximum Attenuation Accuracy ± 0.4 dB or 2% of programmed (whichever is greater) Insertion Loss 17.0 dB maximum 13.0 dB typical @ 1000 MHz 15.5 dB typical @ 2000 MHz Isolation (Power Dividers) 20 dB minimum (port to port) RF Input Power +24 dBm average Switching Speed 10 microseconds typical (after command is received and processed) (3 milliseconds typical processing time) AC Supply 100-240 VAC @ 47-63 Hz Remote Control Ethernet (10/100) Remote Commands Pause Variable Handover Feedback Handover Fade Attenuator Feedback Fade Set Attenuator Read Attenuator Identification RF Connector SMA or N female Operating Temperature Range 0ºC to +50ºC Physical Size See outline drawing 092-5092 ECR/ECN # Page 1 of 1 DATE REV APPR / DATE 15916 04/30/2008 05/28/2008 A TRS 04/30/2008 TRS 05/28/2008 16179 08/07/2008 B TRS 08/07/2008 ECR/ECN # JFW FORM E-7-F REV F DATE (PAUSEx) (VHND Av Aw Vx Vy Tz) (FHND Av Aw Vx Vy Tz) (FAx y z t) (FFAx y z t) (SAx y) (RAx) (IDN) REV APPR / DATE