1208 SERIES Operating Voltage= 250 / 480 VAC 3 PH Wye OperatingCurrentMax= 80, 100amp Operating Frequency= 50-60Hz Temperature Range= -40 to 50 deg. C Storage Temperature = -55 to 85 deg. C DieWithstand(Ph to Case)= 1500V~ for 1 Min DieWithstand (Ph to Ph)= 1500Vdc for 1 min Leakage Current = 10 mA @ 250 VAC, 60Hz Discharge after 1.0 sec.= 34V Max JMK P/N Ordering Information: 80 amp MM-1208-80 100 amp MM-1208-100 This filter series is intended to provide very good common mode and differential insertion loss for high current 3 phase Wye systems. The compact size makes it easy to fit into the rear of a 19.0in equipment rack leaving more space for system hardware. The standard construction is more than adequate for most installation environments. Should your application require operation in a more severe environment JMK's engineering staff can easily modify the mechanical construction to meet the most severe design criteria. USA JMK Inc 15 Caldwell Dr. Amherst, NH 03031 EUR JMK Inc Glasgow G13 1DN Scotland UK PH: 603 886-4100 FX: 603 886-4115 email: [email protected] PH: 44-(0) 7785310729 Fax: 44-(0) 141 589 1884