JMK, Inc. ZL-1906-15 The ZL-1906-15 is a 3ph, Y, filter developed to meet the requirements of MIL-STD-461E. Generally this filter should perform well for the CE102 conducted emissions and will help some for the CE101 emissions. The filter also has significant transient suppression to ensure meeting the requirements of CS116 or a nearby lightening strike. If the filter will be used only with a 125Vac input (Line— Neutral), some adjustment can be made to the transient suppression devices to lower the clamping voltage. MTBF: 1151277 hours @ 30ºC, ground benign. Perfomance Characteristics Operating voltage: 3Ph,125 Vac, 50—400 Hz 3Ph, 250 Vac, 50/60 Hz Max. operating current: 15 ampere per Phase Operating temperature: -40—50ºC Dielectric Withstand. Line/case: 1500 Vac. (1.0 minute) Dielectric Withstand. Line/Neut: 1500 Vdc. (1.0 minute) Capacitance, (Each line—case): 0.02 µF max. Transient energy absorption 8/20 µsec: 130 Joule/Line Minimum Varistor clamping Voltage: 354 volt No load current (line—Neut): 0.25A max @ 125V, 60Hz 1.60A max @ 125V,400Hz Leakage current 125V, 60 Hz: 2.25 ma max 125V, 400 Hz: 15.1 ma max 250 V, 50 Hz: 3.75 ma max (L/L) discharge voltage after disconnect from power: 110V: 75 volt max after 1.0 second 30 volt max after 2.0 second Order Part number : ZL-1906-15 USA JMK Inc 15 Caldwell Dr. Amherst, NH 03031 PH: 603 886-4100 FX: 603 886-4115 email: [email protected] PH: 44-(0) 1389-751841 FX: 44-(0) 141 589-1884 EUR JMK Ltd Glasgow, Scotland UK