3.2x2.4mm RIGHT ANGLE SMD CHIP LED LAMP APEKA3224SECK Features SUPER BRIGHT ORANGE Description 3.2mmx2.4mm RIGHT ANGLE SMT LED, 2.4mm The Super Bright Orange source color devices are made THICKNESS. with DH InGaAlP on GaAs substrate Light Emitting Diode. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 1500PCS / REEL. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAB8920 REV NO: V.3 DATE: JUL/02/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU PAGE: 1 OF 5 ERP:1204000009 Selection Guide Part No. Dice APEKA3224SECK Iv (mcd) @ 20mA Lens Type SUPER BRIGHT ORANGE (InGaAlP) WATER CLEAR Viewing Angle Min. Typ. 2θ θ1/2 110 250 90° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Super Bright Orange λD Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 610 nm IF=20mA Super Bright Orange 601 nm IF=20mA Spectral Line Half-width Super Bright Orange 29 nm IF=20mA C Capacitance Super Bright Orange 15 pF VF=0V;f=1MHz VF Forward Voltage Super Bright Orange 2.1 2.5 V IF=20mA IR Reverse Current Super Bright Orange 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Super Bright Orange Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 195 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAB8920 REV NO: V.3 DATE: JUL/02/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU PAGE: 2 OF 5 ERP:1204000009 Super Bright Orange APEKA3224SECK SPEC NO: DSAB8920 REV NO: V.3 DATE: JUL/02/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU PAGE: 3 OF 5 ERP:1204000009 APEKA3224SECK Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAB8920 REV NO: V.3 DATE: JUL/02/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU PAGE: 4 OF 5 ERP:1204000009 PACKING & LABEL SPECIFICATIONS APEKA3224SECK Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAB8920 REV NO: V.3 DATE: JUL/02/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU PAGE: 5 OF 5 ERP:1204000009