3.2mmx3.6mm FULL-COLOR SURFACE MOUNT LED LAMP Part Number: APF3236SURKVGAPBA PRELIMINARY SPEC ATTENTION Hyper Red Green Blue OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z LOW POWER CONSUMPTION. The Hyper Red source color devices are made with DH z 3.2mmx3.6mm SMT LED, 1.1mm THICKNESS. InGaAlP on GaAs substrate Light Emitting Diode. z ONE RED, ONE GREEN AND ONE BLUE CHIPS IN The Green source color devices are made with InGaN on ONE PACKAGE. G-SiC Light Emitting Diode. z CAN PRODUCE ANY COLOR IN VISIBLE SPEC- The Blue source color devices are made with InGaN TRUM, INCLUDING WHITE LIGHT. on SiC Light Emitting Diode. z PACKAGE : 1000PCS / REEL. Static electricity and surge damage the LEDS. z MOISTURE SENSITIVITY LEVEL : LEVEL 3. It is recommended to use a wrist band or anti-electrostatic z RoHS COMPLIANT glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3.Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAG5709 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 1 OF 7 ERP: 1203005400 Selection Guide Part No. Dice Lens Type Hyper Red (InGaAlP) APF3236SURKVGAPBA Green (InGaN) WATER CLEAR Blue (InGaN) Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 70 150 50 150 18 60 2θ1/2 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Hyper Red Green Blue λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 650 520 468 nm IF=20mA Hyper Red Green Blue 635 525 470 nm IF=20mA Spectral Line Half-width Hyper Red Green Blue 28 35 21 nm IF=20mA C Capacitance Hyper Red Green Blue 35 100 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Hyper Red Green Blue 1.95 3.2 3.2 2.5 4 4 V IF=20mA IR Reverse Current Hyper Red Green Blue 10 10 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Green Blue Units Power dissipation 75 120 120 mW DC Forward Current 30 30 30 mA Peak Forward Current [1] 185 100 100 mA Reverse Voltage 5 Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C V Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG5709 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 2 OF 7 ERP: 1203005400 APF3236SURKVGAPBA Hyper Red SPEC NO: DSAG5709 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 3 OF 7 ERP: 1203005400 Green SPEC NO: DSAG5709 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 4 OF 7 ERP: 1203005400 Blue SPEC NO: DSAG5709 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 5 OF 7 ERP: 1203005400 APF3236SURKVGAPBA Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAG5709 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 6 OF 7 ERP: 1203005400 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAG5709 REV NO: V.3 APPROVED: WYNEC CHECKED: Allen Liu APF3236SURKVGAPBA DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 7 OF 7 ERP: 1203005400