LIGITEK LA266B-HRDBK-PF

LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
LED ARRAY
Pb
Lead-Free Parts
LA266B/HRDBK-PF
DATA SHEET
DOC. NO :
QW0905-LA266B/HRDBK-PF
REV.
:
A
DATE
:
13 - Jul. - 2006
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 1/6
PART NO. LA266B/HRDBK-PF
Package Dimensions
7.5
4.6±0.5
5.9
6.0
7.1
5.0
17.3
13.5
DBK
HR
2.3
3.5±0.5
1.0
2.54*2=5.08TYP
1
2
3.6
1.7
1
3.8
3
3
+
2
1.CATHODE RED
2.COMMON ANODE
3.CATHODE BLUE
6.25±0.5
12.1
LHRDBKS3393/R6
5.0
7.6
5.9
8.6
10.5±0.5
1.5MAX
DBK
□0.5
TYP
18.0MIN
1
2
3
2.0MIN
2.0MIN
2.54TYP
HR
1
2
3
- + 1.CATHODE BLUE
2.COMMON ANODE
3.CATHODE RED
2.54TYP
Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted.
2.Specifications are subject to change without notice.
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 2/6
PART NO. LA266B/HRDBK-PF
Absolute Maximum Ratings at Ta=25 ℃
Absolute Maximum Ratings
Symbol
Parameter
UNIT
HR
DBK
Forward Current
IF
30
30
mA
Peak Forward Current
Duty 1/10@10KHz
IFP
100
100
mA
Power Dissipation
PD
100
120
mW
Ir
10
50
μA
Electrostatic Discharge( * )
ESD
----
150
V
Operating Temperature
Topr
-20 ~ +80
℃
Storage Temperature
Tstg
-30 ~ +100
℃
Reverse Current @5V
Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic
* glove
is recommended when handing these LED. All devices, equipment and machinery must be properly
grounded.
Typical Electrical & Optical Characteristics (Ta=25 ℃)
PART NO
COLOR
MATERIAL
Emitted
GaAlAs
Peak Dominant Spectral
wave halfwidth
wave
length length
△λ nm
λPnm λDnm
Luminous
intensity
@20mA(mcd)
Viewing
angle
2θ 1/2
(deg)
Min. Typ. Max. Min. Typ.
Lens
Red
Forward
voltage
@20mA(V)
660
---
20
1.5
----
2.4
220
350
40
---
470
30
----
3.5
4.0
900 1500
40
Water Clear
LA266B/HRDBK-PF
InGaN/GaN Blue
Note : 1.The forward voltage data did not including ±0.1V testing tolerance.
2. The luminous intensity data did not including ± 15% testing tolerance.
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page3/6
PART NO. LA266B/HRDBK-PF
Typical Electro-Optical Characteristics Curve
HR CHIP
Fig.2 Relative Intensity vs. Forward Current
Fig.1 Forward current vs. Forward Voltage
3.0
Relative Intensity@20mA
Forward Current(mA)
1000
100
10
1.0
0.1
1.0
2.0
3.0
4.0
2.5
2.0
1.5
1.0
0.5
0
5.0
1.0
10
Fig.4 Relative Intensity vs. Temperature
1.2
Relative Intensity@20mA
Forward Voltage@20mA
Fig.3 Forward Voltage vs. Temperature
1.1
1.0
0.9
0.8
-20
-0
20
40
60
80
100
Relative Intensity@20mA
Fig.5 Relative Intensity vs. Wavelength
1.0
0.5
0
650
700
Wavelength (nm)
3.0
2.5
2.0
1.5
1.0
0.5
0
-40
-20
-0
20
40
60
80
Ambient Temperature( ℃)
Ambient Temperature( ℃)
600
1000
Forward Current(mA)
Forward Voltage(V)
-40
100
750
100
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 4/6
PART NO. LA266B/HRDBK-PF
Typical Electro-Optical Characteristics Curve
DBK CHIP
Fig.1 Forward current vs. Forward Voltage
Fig.2 Relative Intensity vs. Forward Current
3.0
Relative Intensity
Normalize @20mA
Forward Current(mA)
1000
100
10
1
01
2.5
2.0
1.5
1.0
0.5
0.0
2.0
1.0
3.0
5.0
4.0
1
10
1.2
1.1
1.0
0.9
0.8
0
20
40
60
80
100
Fig.5 Relative Intensity vs. Wavelength
1.0
0.5
0.0
400
450
500
Wavelength (nm)
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-40
-20
0
20
40
60
80
Ambient Temperature( ℃)
Ambient Temperature( ℃)
Relative Intensity@20mA
Fig.4 Relative Intensity vs. Temperature
Relative Intensity@20mA
Normalize @25℃
Forward Voltage@20mA
Normalize @25℃
Fig.3 Forward Voltage vs. Temperature
-20
1000
Forward Current(mA)
Forward Voltage(V)
-40
100
550
100
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 5/6
PART NO. LA266B/HRDBK-PF
Soldering Condition(Pb-Free)
1.Iron:
Soldering Iron:30W Max
Temperature 350° C Max
Soldering Time:3 Seconds Max(One Time)
Distance:2mm Min(From solder joint to case)
2.Wave Soldering Profile
Dip Soldering
Preheat: 120° C Max
Preheat time: 60seconds Max
Ramp-up
2°C/sec(max)
Ramp-Down:-5°C/sec(max)
Solder Bath:260° C Max
Dipping Time:3 seconds Max
Distance:2mm Min(From solder joint to case)
Temp(° C)
260° C3sec Max
260°
5° /sec
max
120°
25°
0° 0
2° /sec
max
Preheat
60 Seconds Max
50
100
150
Time(sec)
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 6/6
PART NO. LA266B/HRDBK-PF
Reliability Test:
Test Item
Test Condition
Description
Reference
Standard
Operating Life Test
1.Under Room Temperature
2.If=20mA
3.t=1000 hrs (-24hrs, +72hrs)
This test is conducted for the purpose
of detemining the resistance of a part
in electrical and themal stressed.
MIL-STD-750: 1026
MIL-STD-883: 1005
JIS C 7021: B-1
High Temperature
Storage Test
1.Ta=105 ℃±5℃
2.t=1000 hrs (-24hrs, +72hrs)
The purpose of this is the resistance of
the device which is laid under condition
of high temperature for hours.
MIL-STD-883:1008
JIS C 7021: B-10
Low Temperature
Storage Test
1.Ta=-40 ℃±5 ℃
2.t=1000 hrs (-24hrs, +72hrs)
The purpose of this is the resistance
of the device which is laid under
condition of low temperature for hours.
High Temperature
High Humidity Test
1.Ta=65 ℃±5 ℃
2.RH=90 %~95%
3.t=240hrs ±2hrs
The purpose of this test is the resistance
of the device under tropical for hours.
1.Ta=105 ℃±5℃ &-40 ℃±5 ℃
(10min) (10min)
2.total 10 cycles
The purpose of this is the resistance of
the device to sudden extreme changes
in high and low temperature.
MIL-STD-202: 107D
MIL-STD-750: 1051
MIL-STD-883: 1011
Solder Resistance
Test
1.T.Sol=260 ℃±5℃
2.Dwell time= 10 ±1sec.
This test intended to determine the
thermal characteristic resistance
of the device to sudden exposures
at extreme changes in temperature
when soldering the lead wire.
MIL-STD-202: 210A
MIL-STD-750: 2031
JIS C 7021: A-1
Solderability Test
1.T.Sol=230 ℃±5℃
2.Dwell time=5 ±1sec
This test intended to see soldering well
performed or not.
MIL-STD-202: 208D
MIL-STD-750: 2026
MIL-STD-883: 2003
JIS C 7021: A-2
Thermal Shock Test
JIS C 7021: B-12
MIL-STD-202:103B
JIS C 7021: B-11