LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only FEATURES * High collector-emitter voltage ( VCEO : 300V ) * High current transfer ratio ( CTR : MIN. 1,000 at IF=1mA, VCE=2V) * High isolation voltage between input and output ( VISO = 5,000Vrms ) * Low collector dark current ( ICEO : MAX. 10-6A at VCE = 200V ) * Dual-in-line package : LTV-725F * Wide lead spacing package : LTV-725FM * Surface mounting package : LTV-725FS * Tape and reel packaging : LTV-725FS-TA1 * UL approved ( No. E113898 ) * TUV approved ( No. R9653630 ) * CSA approved ( No. CA91533-1 ) * FIMKO approved ( No. 209049 ) * NEMKO approved ( No. P99102464 ) * DEMKO approved ( No. 99-04182) * SEMKO approved ( No. 9943380 / 01-20 ) * VDE approved ( No. 094722 ) Part No. : LTV-725F ( M, S, S-TA1 ) BNS-OD-C131/A4 Page : 1 of 9 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only OUTLINE DIMENSIONS LTV-725F : LTV-725FM : *1. Year date code. *2. 2-digit work week. *3. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand, X : China). Part No. : LTV-725F ( M, S, S-TA1 ) BNS-OD-C131/A4 Page : 2 of 9 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only OUTLINE DIMENSIONS LTV-725FS : *1. Year date code. *2. 2-digit work week. *3. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand, X : China). Part No. : LTV-725F ( M, S, S-TA1 ) BNS-OD-C131/A4 Page : 3 of 9 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only TAPING DIMENSIONS LTV-725FS-TA1 : Description Tape wide Pitch of sprocket holes Distance of compartment Distance of compartment to compartment Part No. : LTV-725F ( M, S, S-TA1 ) BNS-OD-C131/A4 Symbol W P0 F P2 P1 Dimensions in mm ( inches ) 16 ± 0.3 ( .63 ) 4 ± 0.1 ( .15 ) 7.5 ± 0.1 ( .295 ) 2 ± 0.1 ( .079 ) 12 ± 0.1 ( .472 ) Page : 4 of 9 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only ABSOLUTE MAXIMUM RATING ( Ta = 25°C ) PARAMETER SYMBOL RATING UNIT Forward Current IF 50 mA Reverse Voltage VR 6 V Power Dissipation P 70 mW VCEO 300 V IC 150 mA VECO 0.1 V PC 300 mW Ptot 350 mW Viso 5,000 Vrms Operating Temperature Topr -25 ~ +100 °C Storage Temperature Tstg -40 ~ +125 °C Tsol 260 °C INPUT OUTPUT Collector - Emitter Voltage Collector Current Emitter-Collector Voltage Collector Power Dissipation Total Power Dissipation *1 Isolation Voltage *2 Soldering Temperature *1. AC For 1 Minute, R.H. = 40 ~ 60% Isolation voltage shall be measured using the following method. (1) Short between anode and cathode on the primary side and between collector and emitter on the secondary side. (2) The isolation voltage tester with zero-cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave. *2. For 10 Seconds Part No. : LTV-725F ( M, S, S-TA1 ) BNS-OD-C131/A4 Page : 5 of 9 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only ELECTRICAL - OPTICAL CHARACTERISTICS ( Ta = 25°C ) PARAMETER INPUT OUTPUT VF — 1.2 1.4 V IF=10mA Reverse Current IR — — 10 µA VR=4V Terminal Capacitance Ct — 30 250 pF V=0, f=1KHz Collector Dark Current ICEO — — 10-6 A VCE=200V, IF=0 Collector-Emitter Breakdown Voltage BVCEO 300 — — V IC=0.1mA IF=0 Emitter-Collector Breakdown Voltage BVECO 0.1 — — V IE=10µA IF=0 IC 10 40 150 mA * Current Transfer Ratio * CTR = CONDITIONS Forward Voltage Collector Current TRANSFER CHARACTERISTICS SYMBOL MIN. TYP. MAX. UNIT CTR 1,000 4,000 15,000 Collector-Emitter Saturation Voltage VCE(sat) Isolation Resistance RISO Floating Capacitance Cf — Cut-Off Frequency fc Response Time (Rise) Response Time (Fall) % IF=1mA VCE=2V 1.2 V IF=20mA IC=100mA — Ω DC500V 40 ~ 60% R.H. 0.6 1 pF V=0, f=1MHz 1 7 — kHz tr — 100 300 µs tf — 20 100 µs — — 5×1010 1×1011 VCE=2V, IC=20mA RL=100Ω, -3dB VCE=2V, IC=20mA RL=100Ω IC × 100% IF Part No. : LTV-725F ( M, S, S-TA1 ) BNS-OD-C131/A4 Page : 6 of 9 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only CHARACTERISTICS CURVES Fig.2 Collector Power Dissipation vs. Ambient Temperature Fig.1 Forward Current vs. Ambient Temperature Collector power dissipation Pc (mW) Forward current I F (mA) 60 50 40 30 20 10 0 -25 0 25 50 75 100 125 350 300 250 200 150 100 50 0 -25 o 75 100 125 Current transfer ratio CTR (%) 5000 o Forward current (mA) 50 Fig.4 Current Transfer Ratio vs. Forward Current 100 100 C o o 80 C 40 C o 20 C o 60 C 10 1 VCE= 2V 4000 3000 2000 1000 0 0.1 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 Forward voltage (V) Fig.6 Relative Current Transfer Ratio vs. Ambient Temperature 1.0 3mA 2mA 80 1.5mA 60 1mA Pc(MAX.) 40 0.7mA 20 I F= 0.5mA 0 Relative current transfer ratio (%) 100 5mA 10 1 Forward current (mA) Fig.5 Collector Current vs. Collector-emitter Voltage Collector current Ic (mA) 25 Ambient temperature Ta ( C) Fig.3 Forward Current vs. Forward Voltage I F= 1mA VCE= 2V 0.8 0.6 0.4 0.2 0 0 1 2 3 4 5 6 7 Collector-emitter voltage VCE(V) Part No. : LTV-725F ( M, S, S-TA1 ) BNS-OD-C131/A4 0 o Ambient temperature Ta ( C) 8 20 40 60 80 100 O Ambient temperature Ta ( C) Page : 7 of 9 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only CHARACTERISTICS CURVES Fig.7 Collector-emitter Saturation Voltage vs. Ambient Temperature 1000 I F= 20mA Ic= 100mA 1.18 Collector dark current ICEO (nA) Collector-emitter saturation voltage VCE(sat) (V) 1.20 Fig.8 Collector Dark Current vs. Temperature 1.16 1.14 1.12 1.10 1.08 1.06 1.04 1.02 1.00 100 10 20 40 60 100 80 100 td 50 tf 10 5 ts 0.1 1 2 RL -5 10 -10 RL= 1k 100 -15 0.1 1 10 100 Frequency f (kHz) Test Circuit for Response Time RD 100 -20 Load resistance RL (k ) Input 80 VCE= 2V I C= 20mA 0 Voltage gain Av (dB) Response time ( s) tr Vcc 60 Fig.10 Frequency Response VCE= 2V I C= 20mA 0.02 40 Ambient temperature Ta ( C) Fig.9 Response Time vs. Load Resistance 500 20 O O Ambient temperature Ta ( C) 1000 VCE= 200V Test Circuit for Frequency Response Vcc Input Output Output 10% RD RL Output 90% td ts tr Part No. : LTV-725F ( M, S, S-TA1 ) BNS-OD-C131/A4 tf Page : 8 of 9 LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only RECOMMENDED FOOT PRINT PATTERNS (MOUNT PAD) Unit : mm Part No. : LTV-725F ( M, S, S-TA1 ) BNS-OD-C131/A4 Page : 9 of 9