LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only FEATURES 1. This specification shall be applied to photocoupler. Model No. MOC3063 as an option. 2. Applicable Models (Business dealing name) * Dual-in-line package : MOC3063-V : 1-channel type * Wide lead spacing package : MOC3063M-V : 1-channel type * Surface mounting package : MOC3063S-V : 1-channel type * Tape and reel packaging : MOC3063S TA1-V 3. The relevant models are the models Approved by VDE according to DIN VDE 0884:1992-06 Approved Model No.: MOC3063 / MOC3063M / MOC3063S / VDE approved No.: 094722 (According to the specification DIN VDE 0884:1992-06) * Operating isolation voltage VIORM : 850V (Peak) * Transient voltage VTR : 6000V (Peak) * Pollution : 2 (According to VDE 0110-1 : 1997-04) * Clearances distance (Between input and output) : 7.0mm (MIN.) * Creepage distance (Between input and output) : 7.0mm (MIN.) * Isolation thickness between input and output : 0.4mm (MIN.) * Safety limit values Current (Isi) : 400mA (Diode side) Power (Psi) : 700mW (Phototransistor side) Temperature(Tsi) : 175oC In order to keep safety electric isolation of photocoupler, please set the protective circuit to keep within safety limit values when the actual application equipment troubled. * Indication of VDE 0884 approval prints " Part No. : MOC3063-V SERIES BNS-OD-C131/A4 " on sleeve package. Page : 1 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only OUTLINE DIMENSIONS Dual-in-line package : Wide lead spacing package: *1. *2. *3. *4. Year date code. 2-digit work week. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand, X : China). Model No.: MOC3063 Part No. : MOC3063-V SERIES BNS-OD-C131/A4 Page : 2 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only OUTLINE DIMENSIONS Surface mounting package : *1. *2. *3. *4. Year date code. 2-digit work week. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand, X : China). Model MOC3063 Part No. : MOC3063-V SERIES BNS-OD-C131/A4 Page : 3 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only TAPING DIMENSIONS Tape and reel package ( TYPE I ): MOC3063S-TA1 Description Tape wide Pitch of sprocket holes Distance of compartment Distance of compartment to compartment Part No. : MOC3063-V BNS-OD-C131/A4 Symbol W P0 F P2 P1 Dimensions in mm ( inches ) 16 ± 0.3 ( .63 ) 4 ± 0.1 ( .15 ) 7.5 ± 0.1 ( .295 ) 2 ± 0.1 ( .079 ) 12 ± 0.1 ( .472 ) Page : 4 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only ABSOLUTE MAXIMUM RATING ( Ta = 25°C ) PARAMETER SYMBOL RATING UNIT Forward Current IF 50 mA Reverse Voltage VR 6 V Power Dissipation PD 120 mW Off-State Output Terminal Voltage VDRM 600 V Peak Repetitive Surge Current ( PW=100µs, 120pps ) ITSM 1 A PC 150 mW Ptot 250 mW Viso 5,000 Vrms Ambient Operating Temperature Range TA -40 ~ +100 °C Storage Temperature Range Tstg -55 ~ +150 °C TL 260 °C INPUT OUTPUT Collector Power Dissipation Total Power Dissipation *1 Isolation Voltage *2 Soldering Temperature *1. AC For 1 Minute, R.H. = 40 ~ 60% Isolation voltage shall be measured using the following method. (1) Short between anode and cathode on the primary side and between collector, emitter on the secondary side. (2) The isolation voltage tester with zero-cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave. *2. For 10 Seconds Part No. : MOC3063-V SERIES BNS-OD-C131/A4 Page : 5 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only ELECTRICAL - OPTICAL CHARACTERISTICS ( Ta = 25°C ) PARAMETER SYMBOL MIN. TYP. MAX. UNIT CONDITIONS Forward Voltage VF — 1.2 1.4 V IF=20mA Reverse Current IR — 0.05 10 µA VR=6V *1 Peak Blocking Current, Either Direction IDRM1 — — 500 nA VDRM = 600V Peak On-State Voltage, Either Direction VTM — — 3.0 V ITM=100 mA Peak *2 Critical rate of Rise of Off-State Voltage Dv/dt 600 1500 — V/µs Led Trigger Current, Current Required to Latch Output, Either Direction IFT — — 5 mA Holding Current, Either Direction IH — 400 — µA Turn-On Time TON — 8 20 µs Inhibit Voltage VINH — 5 20 Volts Leakage in Inhibited State IDRM2 — — 500 µA INPUT OUTPUT *3 Main Terminal Voltage = 3V COUPLED ZERO CROSSING VP=9V, IF=20mA RL = 100Ω IF=Rated IFT, MT1-MT2 Voltage above which device will not trigger. IF = Rated IFT, Rated VDRM, Off State *1 Test voltage must be applied within dv/dt rating. *2 This is static dv/dt. Commutating dv/dt is a function of the load-driving thyristor(s) only. *3 All devices are guaranteed to trigger at an IF value less than or equal to max IFT. Therefore, recommended operating IF lies between max IFT ( 5mA for MOC3063-V) and absolute max IF (50mA) Part No. : MOC3063-V SERIES BNS-OD-C131/A4 Page : 6 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only ISOLATION SPECIFICATION ACCORDING TO VDE 0884 Parameter Symbol Conditions Rating Unit 30/100/21 - 2 - 850 VPEAK tp=60s, qc<5pC 1275 VPEAK tp=1s, qc<5pC 1594 VPEAK tINI = 10s 6000 VPEAK Class of environmental test - DIN IEC68 Pollution - DIN VDE0110 Maximum Operating Isolation Voltage Partial Discharge Diagram 1 Test Voltage (Between Input and Diagram 2 Output) Maximum Over-voltage VIORM - Vpr VINITIAL Remark Refer to the Diagram 1, 2 Safety Maximum Ratings o 1) Case Temperature Tsi IF = 0, Pc = 0 130 2) Input Current Isi Pc=0 55 mA 3) Electric Power (Output or Total Power Issipation) Psi - 160 mW Isolation Resistance (Test Voltage Between Input and Output : DC500V) RISO Ta=Tsi MIN.109 Ta=Topr(MAX.) MIN.1011 Ta=25 oC MIN.1012 C Refer to the Figure 1, 3 Ω Precautions in performing isolation test * Partial discharge test methods shall be the ones according to the specifications of VDE 0884:1992-06 * Please don't carry out isolation test (Viso) over VINITIAL ,This product deteriorates isolation characteristics by partial discharge due to applying high voltage (ex. VINITIAL ). And there is possibility that this product occurs partial discharge in operating isolation voltage (VIORM) Part No. : MOC3063-V SERIES Page : 7 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only PARTIAL DISCHARGE TEST METHOD Method (A) for type testing and random testing. V VINTIAL Vpr VIORM tp tb t3 t1 tini t2 t4 t1, t2 = 1 to 10s t3, t4 = 1s tp (Partial Discharge Measuring Time)= 60s tb = 62s tini = 10s t Method (B) for routine testing. V Vpr VIORM t3 tp tb t4 t3, t4 = 0.1s tp (Partial Discharge Measuring Time)= 1s tb = 1.2s t The partial discharge level shall not exceed 5 pC during the partial discharge measuring time interval tp under the test conditions shown above. Part No. : MOC3063-V SERIES Page : 8 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only CHARACTERISTICS CURVES Fig.1 Forward Current vs. Ambient Temperature Fig.2 On-state Current vs. Ambient Temperature 50 ITM , on-state current (A) Forward current I F (mA) 60 40 30 20 10 0 -40 -20 0 0.10 0.05 0 -40 -20 20 40 60 80 100 120 o 20 40 60 80 100 120 Ambient temperature Ta ( C) Fig.3 Minimum Trigger Current vs. Ambient Temperature Fig.4 Forward Current vs. Forward Voltage 10 100 VP= 6V RL= 100 8 Forward current I F (mA) Minimum trigger current I FT (mA) 0 o Ambient temperature Ta ( C) 6 4 2 0 o o 60 C o 40 oC 20 C 80 C o 100 C 10 1 20 40 60 80 0.4 100 o Ambient temperature ( C) 0.8 1.2 Fig.5 On-state Voltage vs. Ambient Temperature Fig.6 Holding Current vs. Ambient Temperature 3.0 1 VP= 6V 2.6 Forward current I H (mA) On-state voltage VTM(V) I TM= 100mA 2.2 1.8 1.4 1.0 0.1 0.01 20 40 60 100 80 o Ambient temperature Ta ( C) Part No. : MOC3063-V SERIES BNS-OD-C131/A4 2.0 1.6 Forward voltage VF (V) 20 40 60 80 100 o Ambient Temperature Ta ( C) Page : 9 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-on Only CHARACTERISTICS CURVES Fig.7 Turn-on Time vs. Forward Current Fig.8 Repetitive Peak Off-state Current vs. Temperature 1000 VP= 9V RL= 100 8 Repetitive Peak Off-state Current Idrm (nA) Turn-on time Ton ( s) 10 6 4 2 100 10 1 0 10 20 30 40 50 20 60 80 100 Ambient temperature Ta ( C) Static dv/dt Test Circuit Fig.9 On-state Current vs. On-state Voltage 100 On-state current ITM (mA) 40 O Forward current I F (mA) + 400 Vdc RTEST R= 10k 80 CTEST PULSE INPUT 60 40 MERCURY WETTED RELAY D.U.T. X100 SCOPE PROBE 20 0 APPLIED VOLTAGE WAVEFORM 0 0.5 1.0 1.5 2.0 2.5 On-state voltage VTM (V) 3.0 0 VOLTS Vmax = 400V 252 V τRC dv/dt= 0.63 Vmax τRC = 378 τRC RECOMMENDED FOOT PRINT PATTERNS (MOUNT PAD) Unit : mm Part No. : MOC3063-V SREIES BNS-OD-C131/A4 Page : 10 of 10