LUMINIS W796

es
n lock
l shade.
only.
L U M IN I S
de
al
W793 . W795 . W796
Specification
1 2
All exposed cast aluminum components are made of non corrosive
pure aluminum copper free (Aluminum is less than .1% copper
content.#356 alloy.)
The luminaire base assembly is built with a hinge
mechanism,allowing to tilt the top part of the luminaire to access the
electrical equipment. No tools required. The quick disconnect
ballast assembly is installed on a removable tray. The lamp is
accessible with a twist and lock action.
The ease of maintenance and lamp replacement concept will leave
the optical chamber free of finger prints and foreign particles,
Finish: All polyester powder baked coatings preceded with
a 5 baths preparation process. Meets military grade
MIL-C781706 with a 2000 hours salt spray test.
9
3
4
5
6
7
- Pulse rated porcelain socket.
- One-piece molded silicone gasket with memory retention.
- High power factor CWA ballast for H.I.D.or 98% P.F.
- All stainless steel hardware.
- All Moving and removable parts are sealed with a
memory retention silicone gasket.
8
123456-
W793
W795
12 ”
W796
luminaire tilt
action.
18”
14”
Min. 3/16” thick cast aluminum top cover.
W795: Set of three 1/4” thick interlocked cast aluminum blades.
Clear acrylic U.V. protected high impact cylinder.
1/2” dia. solid aluminum struts.
Type V light distribution borosilicate refractor.
Cast Aluminum swing out housing,with safety cable retainer.
Push release button for quick access to electrical equipment
Safety lock hexagonal side set screw for restricted access.
(Except for safety lock,no tools required for maintenance.)
7- Cast Aluminum ballast housing with dissipation fins to maximize
heat dissipation and cool operation of ballast.
8- 8” dia.extruded aluminum bollard stand.
9- W796: 18” dia.field adjustable min. 3/16” thick cast aluminum
shade. Adjustability will contribute to control brightness with
various viewing angles.
Access
to lamp
Photometry
Access
Ballast
Separate updated technical
specification sheets with related
models and light sources with
I.E.S formatted photometry are
available on
www.luminis.com.
42”
Certification
Mounting.
UL. Wet Location.
Model#
Light source selection
MH (ED17)
W793
W795
W796
For options details and
specifications, please refer to
pages 41.42.43
Set of three 1/2” -13 x 12” lg.
galvanized anchor bolts.
M50
M70
M100
Voltage
Finish
120 V Standard factory
prewired
(If no voltage is specified)
For other voltages, please
specify with catalog number.
(Refer to color chart)
Standard selection
WHT:Snow white
BKT: Jet black
BZT: Bronze
GRT: Titanium gray
DGT: Gun metal
CHT: Champagne
MST: Matte silver
GNT: Forest green
Optional colors
CS: Custom color
RAL: RAL# color
H.I.D.
ed
d
ECLIPSE
Bollard mount
HPS (ED17)
H50
H70
H100
208 V
240 V
277 V
347 V
to cell
ell
Options
H1:
PR7:
Accessories
House shield.
Pier mount.
FS:
PH1:
PH2:
Electrical
Fuse
120/277V photo cell
347V photo cell
Mounting
Bolt circle
dia. 6”
8” dia.
base plate
(Lamps by others)
Luminaires may be altered for design improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5
Tel: 954 .717 .4155 Fax: 954 . 717.4157
Toll free: 888 .401 .6999
Page 39
Web: www.luminis.com
Sept. 2006 Rev. Feb.2007
L U M IN I S
OPTIONAL ACCESSORIES
Push Release button lock
Option: LB1
General notes:
Please specify selected option as a
suffix to luminaire model number.
ex: W614-M100-WHT-LB1
Each model is provided with a
listing of compatible options. Some
options may not be compatible
when used in the same luminaire.
Please check listings.
Reflector disc
Option: OS
For restricted access.
Locked push button.
Requires 8-32 hexagonal
key to release.
House side shield
Option:
H2 For post top
Aluminum oblong
reflector disc.
(Factory installed)
Applicable to
W632 & W640
Type III reflector
Option: RF3 / RA3 / RL3 / PR3
50W / MR16 adjustable down light
Available with 120V power input. For other
voltages, please consult factory
Note:Other down light sources than shown with
option DL4 are available. Please consult factory.
Light distribution control
III light
Option: Type
distribution
R3
refractor
IV light
Option: Type
distribution
R4
refractor
Semi frosted diffuser
Type IV reflector
Option: RF4 / RA4 / RL4
Type IV
Forward throw
aluminum specular
reflector.(Single
lamp only.)
Fuse
Frosted lower
portion of
diffuser.
Option: DL1
DL1-277
Note: FS option fuse is factory
calibrated and installed with
selected wattage.
Post mount luminaires:
FS installed with pole.
Option: DL2
Option: DLC
DL1 / DL2
Combination.
Quartz lamp restrike
Option: QRS
Option
FS
Ballast protection fuse
Available with H.I.D.
luminaires only
12V/50W MR16
Down light with integral
120/12V or 277/12V
electronic transformer.
other input voltages on
request.
Open sealed
top cover
allowing uplighting
Type III Multifaceted
specular reflector.
(Single lamp only.)
Option: LF1
Wall mount light options
Option: SW45
Exterior white
enamel, and specular
aluminum inner
reflective surface.
The shield is inserted
and snaps inside the
diffuser.
360º on site rotation.
13 1/4”
Adjustable down light (W780 series)
Option: DL4
Slope ceiling adaptor
All other types:
FS is installed with luminaire.
Emergency battery pack
For 57w & 70w: Consult factory
EM42
One lamp:
26w: 450 Lmns..
32w: 575 Lmns.
42w: 750 Lmns.
Time: 90 Mnts -120/277V T 0º C
Please refer to page 72 for
more details
Quartz restrike standby lamp kit.
When power failure is restored, it will
energize temporary Quartz lamp with
progressive dimming until full H.I.D
light output is produced.
max.100w DC bayonet type.
(Lamp is not included.)
Not Applicable with CFL lamps.
45º hang straight
ball swivel
for 5/8” dia.
suspension stem.
luminaires
H1 For bollard mount
luminaires.
18” Dia.
ECLIPSE
Light photo sensor
Option: PH1 -120V
PH2 - 277 / 347V
Photo electric sensor,
factory installed with the pole
or inside fixture when pole is
not required.
Suspension safety cable
Option: STC
Additional safety
cable, extended
12” beyond
canopy
Suspension stem
5/8” O.D. suspension stem.
STM60 60” lg.
STM80 80” lg.
For other factory cut to size length
add suffix -STM with desired
length to catalog# max.120”
Lamps & ballast
compatibility
Compact Fluorescent
Lamp
Watts
Lamp
base
26W
32W
42W
57W
70W
85W
120W
G24Xq3
G24Xq3
G24Xq4
G24Xq5
G24Xq6
2G8-1
2G8-1
Metal halide
Lamp
Watts
Lamp
base
ANSI
Code
39W
50W
70W
70W
100W
150W
150W
175W
T6/G12
ED17
ED17
T6/G12
ED17
ED17
T6/G12
ED17
M130
M110/M148
M198/M143
M139
M90/M140
M102/M142
M142
M57
Quartz lamp restrike
Quartz lamp socket for external 120V
Option: QS
emergency power input.
Separate 120V dedicated wiring is included.
max.100 W DC bayonet type.
(Lamp is not included.)
Not Applicable with CFL lamps.
Luminaires may be altered for design improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309
Tel: 954 .717 .4155 Fax: 954 . 717.4157
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Toll free: 888 .401 .6999
Page 41
Web: www.luminis.com
Sept. 2006 Rev. Feb.2007
L U M I N IS
ECLIPSE
OPTIONAL MOUNTING AND ACCESSORIES
17 3/4”
4 1/2”
ACW1 series
EC3W
EC3WS
Mounting
Power
17 3/4”
series
Mounting
Power
10”
3”
3”
4 5/8”
4 5/8”
27”
28”
ACA1
ACW1
Pole mount
EPA:0.7
Wall mount
6 1/8
ACA1/ ACW1 -1” x 3” extruded aluminum side pole or wall mounting adaptor.
1/2” dia. stainless steel rod support. 10” x 4” o.dia. aluminum tenon.
18 3/8”
10 1/2”
11 1/2”
17 3/8”
7 1/4”
6 3/8”
6 1/8”
6 1/8”
16”
16”
Power
Power
Power
Power
EC3PS -1” x 3” extruded
EC3WS -1” x 3” extruded
EC3P -1” x 3” extruded
EC3W -1” x 3” extruded aluminum
aluminum twin short arm side
pole mounting adaptor designed
to fit with 4 to 5” dia. poles.
16” lg. X4” o.d. tenon. This option
is applicable only to catalog
numbers with the suffix LS
EPA:0.72
aluminum twin short arm mounting
adaptor designed for wall
installation, with a set of two cast
aluminum mounting plates.
This option is applicable only to
catalog numbers with the suffix LS
aluminum twin extended
arm side pole mounting
adaptor designed to fit with
4 to 5” dia. poles.
16” lg. X4” o.d. tenon.
EPA:0.97
twin extended arm mounting
adaptor designed for wall
installation, with a set of two cast
aluminum mounting plates.
Please specify selected option with a suffix to the specified model number.
Ex: W624LS-EC3WS-EC5 M100-WHT
23/30”dia. aluminum double
adjustable dropped shade
30”dia. aluminum single
adjustable dropped shade
30”
23”
18” dia. cast aluminum
adjustable shade
Pier or short wall top mount
18”
30”
2 1/2”
3 1/2”
2 1/2”
2 1/2”
2 1/2”
Set of two .093” thick hard
aluminum shades factory
prefixed. The underside is
standard white enamel to optimize
lighting performance. The set of
shades can slide along the
diffuser to accommodate various
landscape viewing angles.
Note: The distance between the
two shades is fixed.
.093” thick hard aluminum factory
prefixed dropped shade. The
underside is standard white
enamel to optimize lighting
performance. The shade can slide
along the diffuser to
accommodate various landscape
viewing angles.
Option: EC6 EPA:0.44
Option: EC7 EPA:0.25
Compatible with:
ACA1
EC3P
ACW1
EC3W
Compatible with:
ACA1
EC3P
ACW1
EC3W
Short bollard
stand.
Compatible with
all bollard
luminaires.
25” Add. PR7 as
suffix to the
selected bollard
model.
(3) 5/8” dia.
3/16” thick cast aluminum shade
8” dia.
mounting holes
for applications where heavy
@ 120º
traffic requires indestructible
6” dia.
materials. The underside is
standard white enamel to optimize
lighting performance. The shade
can slide along the diffuser to
2” dia.power entry.
accommodate various landscape
viewing angles.
Option: EC5 EPA:0.26
Option: PR7
Compatible with:
ACA1
EC3P
EC3PS
Compatible with:
ACW1
EC3W
EC3WS
W788 TO W791 Bollard series.
Luminaires may be altered for design improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5
Tel: 954 .717 .4155 Fax: 954 . 717.4157
Toll free: 888 .401 .6999
Page 42
Web: www.luminis.com
Sept. 2006 Rev. Feb.2007
L U M IN I S
ECLIPSE
OPTIONAL MOUNTING AND ACCESSORIES
Pole mount
Wall mount
10 1/2”
4 1/2”
22”
16”
W614LS
W616LS
11 1/2”
16”
16”
W618LS
28”
ACW1
Wall mount
W624LS
EC3WS
Wall mount short.arm
ACA1
Pole mount
EC3PS
Pole mount short arm.
W722LS
Wall mount
Pole mount
1
16”
W616
W606
W614
W768
W770
W618
18 1/2”
ACW1
Wall mount
EC3P
Wall mount extended.
17 1/2”
W624
W708
W712
W722
16”
W766
EC3W
Wall mount extended.
Compatible poles listing.
* Note:
36” extension with ACA attachment
24” extension with EC3P attachment
Post top mounting
Mounting
style
OAL pole height
12-14 or 16ft.
Post top mount
* Note
4”
PEX
pole
style
PXD
pole
style
PCA
pole
style
ACA1 Pole mount
PCA
pole
style
PAA
pole
style
4”O.D.
5”O.D.
PAA410
PAA412
PAA414
PAA416
PAA418
PAA420
PAA510-A
PAA512-A
PAA514-A
PAA516-A
PAA518-A
PAA520-A
4”O.D.
4”O.D.
4”O.D.
Pole
height
PCA10
PCA12
PCA14
PCA16
PEX10
PEX12
PEX14
PEX16
PEX18
PEX20
PXD10
PXD12
PXD14
PXD16
PXD18
PXD20
10 ft
12 ft
14 ft
16 ft
18 ft
20 ft
Post side mount with EC3P attachment accessory
PAA410-C3P
PAA412-C3P
PAA414-C3P
PAA416-C3P
PAA418-C3P
PAA420-C3P
PAA510-C3P
PAA512-C3P
PAA514-C3P
PAA516-C3P
PAA518-C3P
PAA520-C3P
PCA12-C3P
PCA14-C3P
PCA16-C3P
PEX12-C3P
PEX14-C3P
PEX16-C3P
PEX18-C3P
PXD12-C3P
PXD14-C3P
PXD16-C3P
PXD18-C3P
10 ft
12 ft
14 ft
16 ft
18 ft
20 ft
Post side mount with ACA1 attachment accessory
60”
PAA414-ACA
PAA416-ACA
PAA418-ACA
PAA420-ACA
PAA514-ACA
PAA516-ACA
PAA518-ACA
PAA520-ACA
PCA14-ACA PXD14-ACA
PCA16-ACA PXD16-ACA
PXD18-ACA
PXD20-ACA
14 ft
16 ft
18 ft
20 ft
For poles details and specification, please
refer to pages 140 to 144
Luminaires may be altered for design improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5
Tel: 954 .717 .4155 Fax: 954 . 717.4157
Toll free: 888 .401 .6999
Page 43
Web: www.luminis.com
Sept. 2006 Rev. Feb.2007