FEATURES PANEL INDICATOR LEDs - Ø4.8mm Mounting 307 SERIES PACK QUANTITY = 20 PIECES l Low profile lens styling l Smoked & water clear lens options l Flying lead terminations and low current versions l Sealed to IP40 l Supplied complete with mounting hardware l Product illustrated 307-303-21 l Indicator secured to panel with spring steel available retaining clip SPECIFICATIONS Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure Typically = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. LENS VOLTAGE DC Vopr CURRENT DC lopr LUMINOUS INTENSITY lv@20mA WAVE OPERATING STORAGE LENGTH TEMP TEMP 627 -0 ~ +85^ -0 ~ +85 λp Topr Tstg STANDARD INTENSITY 307-303-21 Red Colour Diffused 12 20 120 Yes 307-306-21 Orange Colour Diffused 12 20 110 627 -0 ~ +85^ -0 ~ +85 Yes 307-309-21 Yellow Colour Diffused 12 21 44 590 -0 ~ +85^ -0 ~ +85 Yes 307-312-21 Green Colour Diffused 12 20 120 565 -0 ~ +85^ -0 ~ +85 Yes HIGH INTENSITY 307-301-21 Red Colour Diffused 12 20 900 660 -0 ~ +85^ -0 ~ +85 Yes 307-325-21 Yellow Colour Diffused 12 20 4300 590 -0 ~ +85^ -0 ~ +85 Yes 307-324-21 Green Colour Diffused 12 20 7800 525 -0 ~ +85^ -0 ~ +85 Yes 307-934-21 Blue Colour Diffused 12 20 2300 470 -0 ~ +85^ -0 ~ +85 Yes 307-998-21 Cold White Colour Diffused 12 20 4600 *see below -0 ~ +85^ -0 ~ +85 Yes 307-301-23 Red Colour Diffused 24-28 20 900 660 -0 ~ +85^ -0 ~ +85 Yes 307-325-23 Yellow Colour Diffused 24-28 20 4300 590 -0 ~ +85^ -0 ~ +85 Yes 307-324-23 Green Colour Diffused 24-28 20 7800 525 -0 ~ +85^ -0 ~ +85 Yes 307-934-23 Blue Colour Diffused 24-28 20 2300 470 -0 ~ +85^ -0 ~ +85 Yes 307-998-23 Cold White Colour Diffused 24-28 20 4600 *see below -0 ~ +85^ -0 ~ +85 Yes Vdc mA mcd nm 0 UNITS 998 *Typical emission colour cold white x 0.296 0.283 0.330 0.330 y 0.276 0.305 0.339 0.318 C C 0 Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. Appropriate LED numbers shown. Refer to page 3. How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS046/07 Issue 1 SAMPLES AVAILABLE Page 1 of 3 307 Series 20.0 9.0 Ø4.8 Ø4.7 Ø6.4 2.9 0.7Sq 20.0 MOUNTING HOLE Anode termination indicated by long tag. Dimensions in mm (Typical) Mounting hole to be clean an burr free Not to scale Materials Push-on Connectors Body Nylon 6 Panel Washer Neoprene Termination Pins Tin on Nickel Plated Phosphor Bronze Retaining Clip Spring steel Fresnel lens Polycarbonate Header 909-000-00 is gold plated 910-000-00 is tin plated for use with 307 series. Suitable for wire sizes from 0.15mm² to 0.38mm² cross sectional area. Dual metal contact design provides low PTFE resistance and gas tight electrical contact. Dimensions in mm (Typical) Not to scale Technical Characteristics SERIES MAXIMUM MAXIMUM POWER PANEL REVERSE CUTOUT MINIMUM MOUNTING MAX. PANEL DISSIPATION VOLTAGE CENTRES THICKNESS 307 425 3 4.8 10.0 11.0 UNITS mW Vdc mm mm mm Optional Flying Lead Terminations ORDER CODE SUFFIX SUPPLY WIRE VOLTAGE WIRE COLOUR LENGTH 13 DC Products Red-anode / Black-cathode 150mm 13 AC Products Brown-live / Blue-neutral 150mm 17 DC Products Red-anode / Black-cathode 1000mm 17 AC Products Brown-live / Blue-neutral 1000mm NO/DIAMETER DIAMETER CONDUCTORS INSULATION 7/0.2mm 1.2mm OF OVER COMMENTS Customised lengths available Optional Reverse Protection Diode ORDER CODE SUFFIX CIRCUIT COMMENTS 01 Available on all indicators except Bi-Colour devices. How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 046/07 Issue 1 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 2 of 3 307 Series Part numbers also available in the 307 Series: PART NO. COLOUR 307-301-04 Red 307-301-20 307-301-22 VOLTAGE PART NO. COLOUR 20mA 307-320-22 Blue 24Vdc Red 5/6Vdc 307-324-04 Green 20mA Red 24Vdc 307-324-20 Green 5/6Vdc 307-301-22-15 Red 24Vdc 307-324-22 Green 24Vdc 307-301-22-50 Red 24Vdc 307-324-22-15 Green 24Vdc 307-301-72 Red 24Vac 307-325-04 Yellow 20mA 307-303-04 Red 20mA 307-325-20 Yellow 5/6Vdc 307-303-20 Red 5/6Vdc 307-325-22 Yellow 24Vdc 307-303-23 Red 24-28Vdc 307-325-22-15 Yellow 24Vdc 307-303-72 Red 24Vac 307-325-22-50 Yellow 24Vdc 307-306-20 Orange 5/6Vdc 307-325-72 Yellow 24Vac 307-306-23 Orange 24-28Vdc 307-934-04 Blue 20mA 307-309-04 Yellow 20mA 307-934-22 Blue 24Vdc 307-309-20 Yellow 5/6Vdc 307-934-22-50 Blue 24Vdc 307-309-23 Yellow 24-28Vdc 307-998-04 Cold White 20mA 307-309-23-21 Yellow 24-28Vdc 307-998-22 Cold White 24Vdc 307-309-72 Yellow 24Vac 307-998-22-15 Cold White 24Vdc (Vdc) Vopr VOLTAGE (Vdc) Vopr 307-309-72-50 Yellow 24Vac 307-998-22-19 Cold White 24Vdc 307-312-04 Green 20mA 307-998-22-50 Cold White 24Vdc 307-312-20 Green 5/6Vdc 307-998-22-51 Cold White 24Vdc 307-312-21-50 Green 12Vdc 307-998-72 Cold White 24Vac 307-312-23 Green 24-28Vdc UNITS 307-312-72 Green 24Vac UNITS The products listed above illustrate all of the options available to order. These products may have custom modifications that alter their operation beyond the generic information contained within this datasheet. Please contact sales for further information. De-rating Information 301, 303, 306 & 309 312 324, 934 & 998 325 How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 046/07 Issue 1 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 3 of 3