FEATURES PROFESSIONAL LED INDICATORS Ø5.0mm Mounting 603 SERIES PACK QUANTITY = 10 PIECES l Bright nickel plated brass housing l Sealed to IP67 l Excellent wide viewing angle characteristics l Suitable for high vibration applications l Internal reverse protection diode fitted as standard in all voltage models. SPECIFICATION Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. LENS VOLTAGE DC (Vdc) Vopr CURRENT DC (mA) lopr LUMINOUS INTENSITY lv@20mA (mcd) WAVE OPERATING STORAGE LENGTH TEMP TEMP λp (nm) Topr Tstg HIGH INTENSITY 603-301-04 Red Colour Diffused 2.1 20 900 660 -40 ~ +85^ -40 ~ +85 Yes 603-325-04 Yellow Colour Diffused 2.2 20 4300 590 -30 ~ +85^ -40 ~ +120 Yes 603-324-04 Green Colour Diffused 2.2 20 7800 525 -30 ~ +85^ -40 ~ +100 Yes 603-934-04 Blue Colour Diffused 2.2 20 2300 470 -30 ~ +85^ -40 ~ +100 Yes 603-998-04 Cool White Colour Diffused 2.2 20 4600 *see below -30 ~ +85^ -40 ~ +100 Yes 603-301-23 Red Colour Diffused 24-28 20 900 660 -40 ~ +85^ -40 ~ +85 Yes 603-325-23 Yellow Colour Diffused 24-28 20 4300 590 -30 ~ +85^ -40 ~ +120 Yes 603-324-23 Green Colour Diffused 24-28 20 7800 525 -30 ~ +85^ -40 ~ +100 Yes 603-934-23 Blue Colour Diffused 24-28 20 2300 470 -30 ~ +85^ -40 ~ +100 Yes 603-998-23 Cool White Colour Diffused 24-28 20 4600 *see below -30 ~ +85^ -40 ~ +100 Yes Vdc mA mcd nm °C °C UNITS Other voltages AC/DC available. Please contact our Technical sales. ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. 998 *Typical emission colour cool white x 0.296 0.283 0.330 0.330 y 0.276 0.305 0.339 0.318 Refer to page 3. Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2008 : DS 004/08 Issue 1 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 1 of 3 603 Series MOUNTING HOLE Dimensions in mm (Typical) Anode termination indicated by red lead. Not to scale Mounting hole to be clean and burr free MATERIALS Body Bright Nickel Plated Brass Nut Bright Nickel Plated Brass Panel Seal Viton Fresnel lens Polycarbonate Encapsulation Epoxy Lock Washer Beryllium Copper TECHNICAL CHARACTERISTICS SERIES 603 MAXIMUM MAXIMUM DISSIPATION VOLTAGE 425 3* / 75• mW Vdc POWER * = Current Version REVERSE PANEL NUT MINIMUM MIN/MAX. TORQUE CENTRES THICKNESS 5.0 0.35 x,y =10.0 1.5-8.0 mm Nm mm mm CUTOUT MOUNTING MOUNTING PANEL • = Voltage Version OPTIONAL FLYING LEAD TERMINATIONS ORDER CODE SUFFIX 19 SUPPLY WIRE VOLTAGE WIRE COLOUR DC Products LENGTH Red-anode / Black-cathode 1000mm NO/DIAMETER DIAMETER CONDUCTORS INSULATION 19/0.15mm 1.2mm OF OVER COMMENTS Customised lengths available website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2008 : DS 004/08 Issue 1 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 2 of 3 DERATING INFORMATION 301 325 324, 934, 998 ALSO AVAILABLE Part numbers also available in the 603 Series: PART NO. COLOUR VOLTAGE DC (Vdc) Vopr 603-301-21 Red 12 VDC 603-301-22 Red 24 VDC 603-301-42 Red 15 VDC 603-303-04 Red 20mA 603-303-20 Red 5/6 VDC 603-303-21 Red 12 VDC 603-309-04 Yellow 20mA 603-309-20 Yellow 5/6 VDC 603-309-22 Yellow 24 VDC 603-312-04 Green 20mA 603-312-04-15 Green 20mA 603-312-20 Green 5/6 VDC 603-312-21 Green 12 VDC 603-312-22 Green 24 VDC 603-324-21 Green 12 VDC 603-324-22 Green 24 VDC 603-998-20 Warm White 5/6 VDC UNITS The products listed above illustrate all of the options available to order. These products may have custom modifications that alter their operation beyond the generic information contained within this datasheet. Please contact sales for further information. website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2008 : DS 004/08 Issue 1 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 3 of 3