PROFESSIONAL LED INDICATORS - Ø 6.35mm Mounting • • • • Black anodised aluminium housing Burn-in options available on request Industry standard mounting diameter Sealed to IP67 608 SERIES MLQ = 10 Dimensions in mm (Typical) Not to Scale Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure = 90,000 Hours. Luminous intensity figures refer to the unmodified discrete LED. PART NUMBER COLOUR LENS VOLTAGE CURRENT DC DC Vopr lopr LUMINOUS INTENSITY lv@10mA WAVE LENGTH lp VIEWING ANGLE OPERATING TEMP Topr STORAGE TEMP Tstg Wide -40 ~ +85 -50 ~ +100 oC oC STANDARD INTENSITY STANDARD INTENSITY 607-303-04 Red 2.1 20 100 650 607-309-04 Yellow Coloured Diffused 2.2 20 100 585 607-312-04 Green 2.2 20 160 563 608-303-04 Red 2.1 20 100 650 608-309-04 Yellow 2.2 20 100 585 608-312-04 Green 2.2 20 160 563 Vdc mA mcd nm Smoked UNITS CRIMP TOOL Order Code: 911-000-00 For use with 909 and 910 series Push-on Connectors © MARL INTERNATIONAL LTD 2002 : DS 03/02 Issue 1 Fax: +44 (0)1229 585155 • email: [email protected] • website: www.marl.co.uk CUSTOM DESIGN SERVICE • website: www.marl-leds.com • Telephone +44 (0)1229 582430 Marl International Limited, experts in LED technology since 1972. The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service.