FEATURES PROFESSIONAL LED INDICATORS Ø6.35mm Mounting 684 SERIES PACK QUANTITY = 10 PIECES l Black anodised aluminium housing l Unique rear mounting indicator l Sealed to IP67 l Suitable for high vibration applications SPECIFICATION Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. LENS VOLTAGE DC (Vdc) Vopr CURRENT DC (mA) lopr LUMINOUS INTENSITY lv@20mA (mcd) WAVE OPERATING STORAGE LENGTH TEMP TEMP 565 -40 ~ +85^ -40 ~ +85 Yes λp (nm) Topr Tstg STANDARD INTENSITY 684-312-04 Green Water Clear 2.2 20 120 HIGH INTENSITY 684-301-04 Red Water Clear 1.9 20 900 660 -40 ~ +85^ -40 ~ +85 Yes 684-325-04 Yellow Water Clear 2.1 20 4300 590 -30 ~ +85^ -40 ~ +120 Yes 684-324-04 Green Water Clear 3.4 20 7800 525 -30 ~ +85^ -40 ~ +100 Yes 684-934-04 Blue Water Clear 3.6 20 2300 470 -30 ~ +85^ -40 ~ +100 Yes 684-998-04 Cool White Water Clear 3.6 20 4600 see below -30 ~ +85^ -40 ~ +100 Yes Vdc mA mcd nm °C °C UNITS ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. 998 *Typical emission colour cool white x 0.296 0.283 0.330 0.330 y 0.276 0.305 0.339 0.318 Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. How to Order: website: www.marl.co.uk • email: [email protected] • webstore: www.leds.co.uk • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2006 : DS 053/06 Issue 2 SAMPLES AVAILABLE Page 1 of 3 684 Series MOUNTING HOLE Dimensions in mm (Typical) Anode termination indicated by long pin. Not to scale Mountng Hole to be clean and burr free. MATERIALS PUSH-ON CONNECTORS Body Black Anodised Aluminium Nut Black Anodised Aluminium Panel Seal Nitrile Lens Epoxy Encapsulation PC5430 resin Lock Washer Spring Steel 909-000-00 is gold plated 910-000-00 is tin plated Dimensions in mm (Typical) Not to scale For use with 684 series lamps TECHNICAL CHARACTERISTICS SERIES 684 MAXIMUM MAXIMUM DISSIPATION VOLTAGE POWER PANEL REVERSE CUTOUT NUT MINIMUM MIN/MAX. TORQUE CENTRES THICKNESS MOUNTING MOUNTING PANEL 75 3 6.35 0.6 x,y = 12.0 2.0-4.0 mW Vdc mm Nm mm mm OPTIONAL FLYING LEAD TERMINATIONS ORDER CODE SUFFIX 15 19 SUPPLY WIRE VOLTAGE WIRE COLOUR DC Products LENGTH Red-anode / Black-cathode DC Products Red-anode / Black-cathode NO/DIAMETER DIAMETER CONDUCTORS INSULATION 19/0.15mm 1.2mm OF OVER COMMENTS 150mm 1000mm Customised lengths available website: www.marl.co.uk • email: [email protected] • webstore: www.leds.co.uk • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2006 : DS 053/06 Issue 2 BS EN ISO 9001:2000 Approved Manufacturer Page 2 of 3 DERATING INFORMATION 325 301 324, 934 & 998 312 website: www.marl.co.uk • email: [email protected] • webstore: www.leds.co.uk • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2006 : DS 053/06 Issue 2 BS EN ISO 9001:2000 Approved Manufacturer Page 3 of 3