MARL 699-997-63

FEATURES
PROFESSIONAL LED INDICATORS Ø12.7mm Mounting
l
699 SERIES
Each product will operate over a wide voltage
input range
PACK QUANTITY = 10 PIECES
l
Black anodised aluminium housing
l
Full internal potting to resist shock and vibration
l
Sealed to IP67
l
True Bi-polar product for low voltage DC
applications
l
Other voltages including DC options available in
this range
SPECIFICATIONS
Ordering Information & Typical Technical Characteristics (Ta = 25°C)
Mean Time Between Failure = 100,000 Hours.
PART NUMBER
COLOUR
Luminous intensity figures refer to the unmodified discrete LED.
LENS
VOLTAGE
AC/DC
Vopr
CURRENT
DC (mA)
lopr
LUMINOUS
INTENSITY
lv@20mA (mcd)
WAVE
OPERATING
STORAGE
LENGTH
TEMP
TEMP
λp (nm)
Topr
Tstg
HIGH INTENSITY
699-501-63
Red
Colour Diffused
12-28
6-16
11000
643
-40 ~ +95^
-40 ~ +100
Yes
699-521-63
Yellow
Colour Diffused
12-28
6-16
16000
591
-40 ~ +95^
-40 ~ +100
Yes
699-532-63
Green
Colour Diffused
12-28
6-16
23000
527
-40 ~ +95^
-40 ~ +100
Yes
699-930-63
Blue
Colour Diffused
12-28
6-16
7000
470
-40 ~ +95^
-40 ~ +100
Yes
699-997-63
Cool White
Colour Diffused
12-28
6-16
14000
*see below
-40 ~ +95^
-40 ~ +100
Yes
699-501-75
Red
Colour Diffused
110Vac
6
11000
643
-40 ~ +95^
-40 ~ +100
Yes
699-521-75
Yellow
Colour Diffused
110Vac
6
16000
591
-40 ~ +95^
-40 ~ +100
Yes
699-532-75
Green
Colour Diffused
110Vac
6
23000
527
-40 ~ +95^
-40 ~ +100
Yes
699-930-75
Blue
Colour Diffused
110Vac
6
7000
470
-40 ~ +95^
-40 ~ +100
Yes
699-997-75
Cool White
Colour Diffused
110Vac
6
14000
*see below
-40 ~ +95^
-40 ~ +100
Yes
Vac/Vdc
mA
mcd
nm
°C
°C
UNITS
^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. Refer to page 3.
997F-C
*Typical emission colour cool white
x
0.245
0.361
0.356
0.264
y
0.229
0.385
0.351
0.220
Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within
a batch.
How to Order:
website: www.marl.co.uk • email: [email protected] •
•
Telephone +44 (0)1229 582430
•
Fax: +44 (0)1229 585155
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation
relating to either products or service.
for products or service.
Marl International reserve the right to alter without notice the specification or any conditions of supply
© MARL INTERNATIONAL LTD 2007 : DS 066/07
Issue 2
SAMPLES AVAILABLE
Page 1 of 2
699 Series
Above 50Vac/dc
Below 50Vac/dc
Mounting Hole
Dimensions in mm (Typical)
Mounting hole to be clean and burr free
Not to scale
MATERIALS
PUSH-ON CONNECTORS
Body
Aluminium grade 6063 black anodised
Nut
Stainless Steel grade 303
Panel Seal
Viton
Termination
Copper with silver flash finish
Lock Washer
Zinc plated steel
Fresnel lens
Polycarbonate
Encapsulation
PC5430
Header
Nylon6 A82
925-000-00 is brass tin plated.
For use with 699 series lamps.
Dimensions in mm (Typical)
Not to scale
TECHNICAL CHARACTERISTICS
SERIES
MAXIMUM
PANEL
POWER
DISSIPATION
699
NUT
CUTOUT
MOUNTING
TORQUE
MINIMUM
MOUNTING
CENTRES
MIN/MAX.
PANEL
THICKNESS
825
12.7
1.0
x,y=26.0
2.0-10.0
mW
mm
Nm
mm
mm
DERATING INFORMATION
532,
501 & 521
930 & 997
How to Order:
website: www.marl.co.uk • email: [email protected] •
•
Telephone +44 (0)1229 582430
•
Fax: +44 (0)1229 585155
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation
relating to either products or service.
for products or service.
Marl International reserve the right to alter without notice the specification or any conditions of supply
© MARL INTERNATIONAL LTD 2007 : DS 066/07
Issue 2
SAMPLES AVAILABLE
BS EN ISO 9001:2000
Approved Manufacturer
Page 2 of 2