SG723 PRECISION VOLTAGE REGULATOR DESCRIPTION FEATURES This monolithic voltage regulator is designed for use with either positive or negative supplies as a series, shunt, switching, or floating regulator with currents up to 150mA. Higher current requirements may be accommodated through the use of external NPN or PNP power transistors. This device consists of a temperature compensated reference amplifier, error amplifier, power series pass transistor, current limit, and remote shutdown circuitry. • • • • • • • The SG723 will operate over the full military ambient temperature range of -55°C to 125°C. HIGH RELIABILITY FEATURES - SG723 Positive or negative supply operation Series, shunt, switching or floating operation Low line and load regulation Output adjustable from 2V to 37V Output current to 150 mA Low standby current drain 0.002%/°C average temperature variation ♦ Available to MIL-STD-883 and DESC SMD ♦ MIL-M38510/10201BHA - JAN 723F ♦ MIL-M38510/10201BIA - JAN 723T ♦ MIL-M38510/10201BCA - JAN723J ♦ Radiation data available ♦ LMI level "S" processing available BLOCK DIAGRAM LINFINITY 4/90 Rev 1.2 6/97 Copyright 1997 1 Microelectronics Inc. 11861 Western Avenue ∞ Garden Grove, CA 92841 (714) 898-8121 ∞ FAX: (714) 893-2570 SG723 ABSOLUTE MAXIMUM RATINGS (Note 1) Pulse (50 ms) Input Voltage from VIN to V- ......................... 50V Continuous Input Voltage from VIN to V- ............................. 40V Input to Output Voltage Differential .................................... 40V Maximum Output Current .............................................. 150mA Current from VZ (J-Package only)................................... 25 mA Current from VREF............................................................... 15mA Operating Junction Temperature Hermetic (T, J, F, L-Packages)..................................... 150°C Storage Temperature Range ........................... -65°C to 150°C Lead Temperature (Soldering, 10 Seconds) ................. 300°C Note 1. Exceeding these ratings could cause damage to the device. THERMAL DATA J Package: Thermal Resistance-Junction to Case, θ JC .................. 30°C/W Thermal Resistance-Junction to Ambient, θ JA .............. 80°C/W T Package: Thermal Resistance-Junction to Case, θ JC .................. 25°C/W Thermal Resistance-Junction to Ambient, θ JA ........... 130°C/W F Package: Thermal Resistance-Junction to Case, θ JC ................... 80°C/W Thermal Resistance-Junction to Ambient, θ JA ........... 145°C/W L Package: Thermal Resistance-Junction to Case, θ JC .................. 35°C/W Thermal Resistance-Junction to Ambient, θ JA ........... 120°C/W Note A. Junction Temperature Calculation: TJ = TA + (PD x θJA). Note B. The above numbers for θ JC are maximums for the limiting thermal resistance of the package in a standard mounting configuration. The θ JA numbers are meant to be guidelines for the thermal performance of the device/pcboard system. All of the above assume no ambient airflow. RECOMMENDED OPERATING CONDITIONS (Note 2) Input Voltage Range ................................. (VOUT +4.5V) to 38 V Output Current Range ........................................ 5mA to 45mA Reference Current............................................................. 5mA Zener Current (J-Package only)......................................... 5mA Operating Ambient Temperature Range SG723 .......................................................... -55°C to 125°C Note 2. Range over which the device is functional. ELECTRICAL CHARACTERISTICS (Unless otherwise specified, these specifications apply for the operating ambient temperature of TA = 25°C, VIN = VC = 12V, V- = 0V, VOUT = 5V, IL = 1 mA, RSC = 0Ω, C1 = 100pF, and divider impedance as seen by error amplifier ≤ 10KΩ. Low duty cycle pulse testing echniques are used which maintains junction and case temperatures equeal to the ambient temperature.) Parameter Input Voltage Range Output Voltage Range Input to Output Differential Line Regulation (Note 3) Load Regulation (Note 3) Ripple Rejection Temperature Stability (Note 4) Short Circuit Current Limit Reference Voltage Output Noise Voltage Standby Current Drain Long Term Stability Test Conditions VIN = 12V to 15V TA = TMIN to TMAX VIN = 12V to 40V IL = 1 to 50 mA TA = TMIN to TMAX f = 50 Hz to 10KHz CREF = 0 CREF = 5µF TA = TMIN to TMAX RSC = 10Ω BW = 100Hz to 10KHz CREF = 0 CREF = 5µF IL = 0, VIN = 30V Note 3. Applies for constant junction temperature. Temperature drift effects must be taken into account separately when the unit is operating under conditions of high dissipation. V V V %VOUT %VOUT %VOUT %VOUT %VOUT 74 86 0.002 0.015 65 6.95 7.15 7.35 dB dB %/°C mA V 20 2.5 2.3 0.1 µVrms µVrms mA %/Khr 2 3.5 Units Note 4. These parameters, although guaranteed, are not tested in production. LINFINITY 4/90 Rev 1.2 6/97 Copyright 1997 SG723 Typ. Max. 40 37 38 0.01 0.1 0.3 0.02 0.2 0.03 0.15 0.6 Min. 9.5 2.0 3.0 Microelectronics Inc. 11861 Western Avenue ∞ Garden Grove, CA 92841 (714) 898-8121 ∞ FAX: (714) 893-2570 SG723 CHARACTERISTIC CURVES FIGURE 1. LOAD REGULATION FIGURE 2. MAXIMUM LOAD CURRENT FIGURE 3. CURRENT LIMITING CHARACTERISTICS FIGURE 4. REGULATION VS. INPUT-OUTPUT VOLTAGE REGULATION FIGURE 5. STANDBY CURRENT DRAIN FIGURE 6. TRANSIENT RESPONSE APPLICATION INFORMATION FIGURE 8 - BASIC HIGH VOLTAGE REGULATOR VOUT = 7V TO 37 V FIGURE 7 - BASIC LOW VOLTAGE REGULATOR VOUT = 2V TO 7 V LINFINITY 4/90 Rev 1.2 6/97 Copyright 1997 3 Microelectronics Inc. 11861 Western Avenue ∞ Garden Grove, CA 92841 (714) 898-8121 ∞ FAX: (714) 893-2570 SG723 APPLICATION INFORMATION (continued) FIGURE 9 - HIGH CURRENT REGULATOR EXTERNAL NPN TRANSISTOR IL = 1.0A FIGURE 10 - NEGATIVE VOLTAGE REGULATOR CONNECTION DIAGRAMS & ORDERING INFORMATION Package 14-PIN CERAMIC DIP J - PACKAGE 10-PIN METAL CAN T - PACKAGE Part No. SG723J/883B JAN723J SG723J SG723T/883B JAN723T SG723T (See Notes Below) Ambient Temperature Range Connection Diagram -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C N.C. CURRENT LIMIT 1 14 2 13 CURRENT SENSE INVERTING INPUT NON-INVERTING INPUT 3 12 4 11 5 10 VREF 6 9 V- 7 8 (Notes 3 & 4) N.C. FREQ. COMPENSATION VIN VC VOUT VZ N.C. CURRENT LIMIT CURRENT SENSE 10 1 INVERTING INPUT 2 NON-INVERTING INPUT 3 4 VREF 5 FREQ. COMPENSATION 9 6 8 VIN 7 VC VOUT V- 10-PIN CERAMIC FLAT PACK F - PACKAGE 20-PIN CERAMIC LEADLESS CHIP CARRIER L- PACKAGE JAN723F SG723L/883B SG723L -55°C to 125°C -55°C to 125°C -55°C to 125°C Note 1. Contact factory for JAN and DESC product availablity. 2. All packages are viewed from the top. CURRENT SENSE INVERTING INPUT 1 10 2 9 NON-INVERTING INPUT VREF 3 8 4 7 V- 5 6 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. FREQ. COMP. CURRENT LIMIT CURRENT SENSE N.C. INVERTING INPUT N.C. N. I. INPUT VREF N.C. V- 3 2 1 CURRENT LIMIT FREQ. COMP. VIN VC VOUT 20 19 4 18 5 17 6 16 7 15 8 14 9 10 11 12 13 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. N.C. VZ N.C. VOUT N.C. N.C. N.C. VC N.C. VIN Note 3. VZ output is not available in T, F-packages. 4. Pin 5 is connected to case. LINFINITY 4/90 Rev 1.2 6/97 Copyright 1997 (Note 3) 4 Microelectronics Inc. 11861 Western Avenue ∞ Garden Grove, CA 92841 (714) 898-8121 ∞ FAX: (714) 893-2570