ADS-55 55W Single Output with 5V,4A DC-DC Converter series Features : Universal AC input / Full range Protections: Short circuit / Overload / Over voltage Cooling by free air convection 100% full load burn-in test Fixed switching frequency at 45KHz 2 years warranty SPECIFICATION ADS-5512 MODEL OUTPUT INPUT CH1 CH2 CH1 CH2 DC VOLTAGE 12V 5V 24V 5V RATED CURRENT 3A 3A 2A 2A CURRENT RANGE 0 ~ 4A 0 ~ 4A 0 ~ 2.5A 0 ~ 4A RATED POWER 51W 3.0% 1.0% 3.0% 0.5% 0.5% 1.0% 0.5% LOAD REGULATION 0.5% 0.5% 1.0% 0.5% SETUP, RISE TIME 800ms, 50ms/230VAC HOLD UP TIME (Typ.) 80ms/230VAC VOLTAGE RANGE 88 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz 1600ms, 50ms/115VAC at full load 16ms/115VAC at full load 124 ~ 370VDC EFFICIENCY (Typ.) 74% AC CURRENT (Typ.) 1.6A/115VAC INRUSH CURRENT (Typ.) LEAKAGE CURRENT COLD START 20A/115VAC 40A/230VAC <1mA / 240VAC 105 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed CH1:27.6 ~ 32.4V CH1:13.8 ~ 16.2V WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE 74% 1A/230VAC Protection type : Hiccup mode, recovers automatically after fault condition is removed -10 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03%/ (0~50 ) on CH1 output 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B HARMONIC CURRENT EMS IMMUNITY MTBF DIMENSION PACKING NOTE 100mVp-p 1.0% WORKING TEMP. OTHERS 100mVp-p CH1:21.6 ~ 26.4V VOLTAGE TOLERANCE Note.3 OVER VOLTAGE (Note 4) 100mVp-p CH1:10.8 ~ 13.2V LINE REGULATION OVERLOAD EMC 58W RIPPLE & NOISE (max.) Note.2 100mVp-p VOLTAGE ADJ. RANGE PROTECTION SAFETY & ADS-5524 OUTPUT NUMBER / 70% RH Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A 276.3K hrs min. MIL-HDBK-217F (25 159*97*38mm (L*W*H) 0.57Kg; 24pcs/13.7Kg/0.75CUFT ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:ADS-55-SPEC 2008-10-08 ADS-55 55W Single Output with 5V,4A DC-DC Converter Mechanical Specification Case No. 901 4.5 series Unit:mm 3.5 7 152.5 1 65 8.25 2 84.5 4 5 2-M 6.5 6 97 3 3 7 8 3.5 4.5 78 24 159 150 Terminal Pin No. Assignment : 22 Assignment Assignment Pin No. Pin No. AC/L DC OUTPUT +V 1 5 AC/N NC 2 6 8 3 FG DC/DC OUTPUT +5V 4,7 DC OUTPUT COM 38 3.5 M3 28.5 3.5 3- 18 18.5 9 9 6.5 117 Block Diagram fosc : 45KHz SWITCHING REGULATOR RECTIFIERS & FILTER EMI FILTER I/P +5V RECTIFIERS & FILTER POWER SWITCHING +V COM FG O.L.P. PWM CONTROL Derating Curve DETECTION CIRCUIT Static Characteristics (5512) Ta=25 100 OUTPUT VOLTAGE (V) +12V With 18.2CFM min.(10cm) 80 70 LOAD (%) 60 50 NO FAN 40 20 -10 300 5.2 0 10 20 30 40 50 AMBIENT TEMPERATURE ( ) 60 (HORIZONTAL) 11 250 5.0 +5V 10 4.8 200 9 4.6 150 8 4.4 100 7 4.2 +12V 50 6 4.0 +5V 25 60 80 100 120 140 160 180 200 220 240 OUTPUT RIPPLE (mVp-p) 12 260 INPUT VOLTAGE (V) 60Hz File Name:ADS-55-SPEC 2008-10-08