P50A-D 44~49W AC-DC Dual Output Desktop series Features : 3 pole AC inlet IEC320-C14 Class power (with earth pin) Protections: Short circuit / Overload / Over voltage Fully enclosed plastic case Fix switching frequency and regulation Topology: PWM 3882 circuit LED indicator for power on Approvals: UL / CUL / TUV / CB / CE 1 year warranty TUV Rheinland Product Safety SPECIFICATION ORDER NO. SAFETY MODEL NO. P50A14-R1B P50A16-R1B PSU50A-14 PSU50A-16 12V 5V 15V 5V 24V 4A 2A 4A 1.8A 4A 1A CURRENT RANGE 0.5 ~ 4.0A 0.1 ~ 2.0A 0.5 ~ 4.0A 0.1 ~1.8A 0.5 ~ 4.0A 0.1 ~ 1.0A RATED POWER 44W DC VOLTAGE Note.2 5V RATED CURRENT OUTPUT P50A13-R1B PSU50A-13 geprUfre Sicherheit 47W RIPPLE & NOISE (max.) Note.3 50mVp-p 100mVp-p 50mVp-p 49W 100mVp-p 50mVp-p 100mVp-p VOLTAGE ADJ. RANGE Fixed VOLTAGE TOLERANCE Note.4 6.0% 10% 6.0% 10% 6.0% 10% LINE REGULATION Note.5 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATION Note.6 5.0% 9.0% 5.0% 9.0% 5.0% 9.0% SETUP, RISE, HOLD UP TIME 1.5s, 50ms, 12ms at full load INPUT VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 70% AC CURRENT 1.6A / 100VAC INRUSH CURRENT (max.) LEAKAGE CURRENT(max.) 40A / 230VAC 0.75mA / 240VAC OVERLOAD PROTECTION 0 ~ +40 WORKING HUMIDITY 20% ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH (Refer to output load derating curve) 0.03% / (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL1950, CSA22.2, EN60950-1 approved I/P-O/P:3KVAC , I/P-FG:1.5KVAC I/P-O/P,I/P-FG:100M Ohms / 500VDC / 25 / 70% RH ISOLATION RESISTANCE EMI CONDUCTION & RADIATION Compliance to EN55022(CISPR22) class B HARMONIC CURRENT Compliance to EN61000-3-2,3 EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,11, ENV50204, light industry level, criteria A DIMENSION PACKING PLUG CONNECTOR CABLE NOTE Protection type : Hiccup mode, recovers automatically after fault condition is removed WORKING TEMP. MTBF OTHERS 75% 150 ~ 250% rated output power 5V: 110 ~ 140% of rated output voltage Protection type : Shut down o/p voltage, re-power on to recover SAFETY STANDARDS WITHSTAND VOLTAGE EMC (Note. 7) 74% OVER VOLTAGE ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY & 135 ~ 370VDC 280K hrs min. MIL-HDBK-217F (25 ) 147*76*43mm (L*W*H) 0.55kg; 36pcs / 21kg / CARTON Standard type R1B: DIN 5PIN for stock ; Other type available by customer requested Standard type AWM2464 18Awg*4c with shiell 4ft for stock ; Other type available by customer requested 1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerence: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 20% to 100% rated load. 7.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:P50A-D-SPEC 2007-05-14 P50A-D 44~49W AC-DC Dual Output Desktop Mechanical Specification series Unit:mm 43 UL2464 18AWG 1220+100/-0 43 144.5 54.8 76 SWITCHING ADAPTOR 10.2 POWER LED 147 Plug Assignment 144.5 21.5 Standard plug: R1B (option) NAME PLATE 3 1 o PIN NO OUTPUT 1 COM 2 COM 3 +5VDC 4 - Vout 5 +Vout RUBBER FOOTX4 Derating Curve Static Characteristics 100 LOAD (%) 100 LOAD (%) 45 5 2 4 76 40 42 38 69.9 60 0 10 20 30 Ta ( ) 40 80 60 0 50 60 70 80 90 100 260 INPUT VOLTAGE File Name:P50A-D-SPEC 2007-05-14 P50A-T 46.5~50W AC-DC Triple Output Desktop series Features : 3 pole AC inlet IEC320-C14 Class power (with earth pin) Protections: Short circuit / Overload / Over voltage Fully enclosed plastic case Fix switching frequency and regulation Topology: PWM 3882 circuit LED indicator for power on Approvals: UL / CUL / TUV / CB / CE 1 year warranty TUV Rheinland Product Safety SPECIFICATION ORDER NO. SAFETY MODEL NO. P50A13D-R1B P50A14E-R1B PSU50A-13D PSU50A-14E 12V -5V 5V 12V -12V 5V 15V -15V RATED CURRENT 4A 2A 0.5A 4A 2A 0.5A 4A 1.5A 0.5A CURRENT RANGE 0.5 ~ 4.0A 0.5 ~ 2.0A 0.1 ~ 0.5A 0.5 ~ 4.0A 0.5 ~2.0A 0.1 ~0.5A 0.5 ~ 4.0A 0.5 ~ 1.5A 0.1 ~ 0.5A RATED POWER 46.5W 100mVp-p 100mVp-p DC VOLTAGE OUTPUT P50A13A-R1B PSU50A-13A Note.2 5V geprUfre Sicherheit 50W RIPPLE & NOISE (max.) Note.3 50mVp-p 100mVp-p 100mVp-p 50mVp-p 50W 100mVp-p 100mVp-p 50mVp-p VOLTAGE ADJ. RANGE Fixed VOLTAGE TOLERANCE Note.4 6.0% 10% 12% 6.0% 10% 12% 6.0% 10% 12% LINE REGULATION Note.5 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATION Note.6 5.0% 10% 10% 5.0% 10% 10% 5.0% 10% 10% SETUP, RISE, HOLD UP TIME 1.5s, 50ms, 12ms at full load INPUT VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 70% AC CURRENT 1.6A / 100VAC INRUSH CURRENT (max.) LEAKAGE CURRENT (max.) 40A / 230VAC 0.75mA / 240VAC OVER VOLTAGE 5V: 110 ~ 140% of rated output voltage Protection type : Shut down o/p voltage, re-power on to recover WORKING TEMP. 0 ~ +40 WORKING HUMIDITY 20% ~ 90% RH non-condensing EMS IMMUNITY MTBF NOTE 74% OVERLOAD ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC EMI CONDUCTION & RADIATION (Note. 7) HARMONIC CURRENT CONNECTOR 72% 150 ~ 250% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION OTHERS 135~ 370VAC (Refer to output load derating curve) -20 ~ +85 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL1950, CSA22.2, EN60950-1 approved I/P-O/P:3KVAC , I/P-FG:1.5KVAC I/P-O/P,I/P-FG:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022(CISPR22) class B Compliance to EN61000-3-2,3 Compliance to EN61000-4-2,3,4,5,6,11, ENV50204, light industry level, criteria A 280K hrs min. MIL-HDBK-217F (25 ) DIMENSION PACKING PLUG Standard type R1B: DIN 5PIN for stock ; Other type available by customer requested CABLE Standard type AWM2464 18Awg*4c with shiell 4ft for stock ; Other type available by customer requested 147*76*43mm (L*W*H) 0.55kg; 36pcs / 21kg / CARTON 1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerence: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 20% to 100% rated load. 7.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:P50A-T-SPEC 2007-05-14 PP5500AA--TT ss ee rriieess 46.5~50W AC-DC Triple Output Desktop Mechanical Specification Unit:mm 43 UL2464 18AWG 1220+100/-0 43 144.5 54.8 76 SWITCHING ADAPTOR 10.2 POWER LED 147 Plug Assignment 21.5 144.5 Standard plug: R1B (option) NAME PLATE 3 1 o PIN NO OUTPUT 1 COM 2 COM 3 +5VDC 4 - Vout 5 +Vout RUBBER FOOTX4 Derating Curve Static Characteristics 100 LOAD (%) 100 LOAD (%) 45 5 2 4 76 40 42 38 69.9 60 0 10 20 30 Ta ( ) 40 80 60 0 50 60 70 80 90 100 260 INPUT VOLTAGE File Name:P50A-T-SPEC 2007-05-14