S-145 145W Single Output Switching Power Supply series Features : AC input range selectable by switch Protections: Short circuit / Overload / Over voltage Cooling by free air convection 100% full load burn-in test Fixed switching frequency at 25KHz LED indicator for power on Made in China for low cost High reliability 1 year warranty SPECIFICATION MODEL OUTPUT INPUT S-145-5 S-145-7.5 S-145-12 S-145-15 S-145-24 S-145-27 S-145-48 DC VOLTAGE 5V 7.5V 12V 15V 24V 27V 48V RATED CURRENT 25A 18A 12A 9.6A 6A 5.3A 3A CURRENT RANGE 0 ~ 25A(30A max.) 0 ~ 18A(21A max.) 0 ~ 12A(14A max.) 0 ~ 9.6A(11A max.) 0 ~ 6A(7A max.) 0 ~ 5.3A 0 ~ 3A RATED POWER 125W 143.1W 144W 120mVp-p 120mVp-p 150mVp-p 200mVp-p 240mVp-p 6 ~ 8.3V 1.0% 10.6 ~ 13.2V 1.0% 13.2 ~ 16.5V 1.0% 21 ~ 28V 1.0% 24.5 ~ 29.5V 1.0% 43.2 ~ 52.8V 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% SETUP, RISE TIME 100ms, 50ms at full load HOLD UP TIME (Typ.) 24ms at full load VOLTAGE RANGE 88 ~ 132VAC/176 ~ 264VAC selected by switch FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 78% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 2.6A/115VAC 1.3A/230VAC COLD START 32A 80.5% 80.5% 81% LEAKAGE CURRENT <3.5mA / 240VAC OVERLOAD 125 ~ 165% rated output power Protection type : Shut down o/p voltage, re-power on to recover ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE 5.6 ~ 6.8V 8.6 ~ 10V 13.8 ~ 16.2V 17.3 ~ 20.3V 83.5% 85% 83.5% 29 ~ 32V 31.05 ~ 36.45V 55.2 ~ 64.8V Protection type : Shut down o/p voltage, re-power on to recover -10 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes Design refer to UL1012 I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B EMS IMMUNITY Compliance to IEC801-2,3,4, light industry level, criteria A MTBF 286.7K hrs min. DIMENSION 199*98*38mm (L*W*H) 0.71Kg; 30pcs/22.5Kg/1.22CUFT PACKING NOTE 144W 120mVp-p 4.5 ~ 5.5V VOLTAGE TOLERANCE Note.3 2.0% WORKING TEMP. WORKING HUMIDITY OTHERS 144W RIPPLE & NOISE (max.) Note.2 100mVp-p OVER VOLTAGE EMC 144W VOLTAGE ADJ. RANGE PROTECTION SAFETY & 135W MIL-HDBK-217F (25 ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. File Name:S-145-SPEC 2008-04-10 S-145 145W Single Output Switching Power Supply Mechanical Specification Case No. 902 series Unit:mm 7 3.5 9 12 197 1 9.5 2 98 80 4 85.5 3 8.2 5 6 7 4- 3.5 M 3 57.5 4.5 120 199 190 38 3 18 3.5 3-M 3.5 18 9 Pin No. Assignment AC/L 1 AC/N 2 3 FG DC OUTPUT -V 4,5 DC OUTPUT +V 6,7 9.5 6.5 9.5 Terminal Pin No. Assignment 157 22 Block Diagram fosc : 25KHz 230 115 RECTIFIERS & FILTER EMI FILTER I/P RECTIFIERS & FILTER POWER SWITCHING +V -V O.C.P. FG Derating Curve O.V.P. PWM CONTROL DRIVER Static Characteristics (24V) S-145-12,15 80 60 LOAD (%) OUTPUT VOLTAGE (V) S-145-24~48 100 S-145-5,7.5 40 20 -10 -10 0 0 10 20 30 40 50 45 AMBIENT TEMPERATURE ( ) 60 55 (VERTICAL) (HORIZONTAL) 350 28 300 24 250 20 200 16 150 12 100 8 50 80 160 85 170 90 180 95 190 100 200 105 210 110 220 115 230 120 240 125 250 OUTPUT RIPPLE (mVp-p) Ta=25 32 130 260 INPUT VOLTAGE (V) 60Hz File Name:S-145-SPEC 2008-04-10