S-201 200W Single Output Switching Power Supply series ■ Features : $AC input range selectable by switch $Protections: Short circuit / Overload / Over temperature $Cooling by free air convection $100% full load burn-in test $Compact size, light weight $Fixed switching frequency at 25KHz $Low cost $High reliability $1 year warranty SPECIFICATION MODEL OUTPUT INPUT S-201-5 S-201-7.5 S-201-12 S-201-13.5 S-201-15 S-201-24 S-201-27 DC VOLTAGE 5V 7.5V 12V 13.5V 15V 24V 27V S-201-48 48V RATED CURRENT 40A 26.5A 16.5A 14.7A 13A 8.3A 7.4A 4.2A CURRENT RANGE 0 ~ 40A 0 ~ 26.50A 0 ~ 16.5A 0 ~ 14.7A 0 ~ 13A 0 ~ 8.3A 0 ~ 7.4A 0 ~ 4.2A RATED POWER 200W 198.75W 198W 198.45W 198W 199.2W 199.8W 201.6W RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 240mVp-p VOLTAGE ADJ. RANGE 6 ~ 9V ± 2.0% 10 ~ 13.2V ± 1.0% 12 ~ 15V ± 1.0% 13.5 ~ 18V ± 1.0% 20 ~ 26.4V ± 1.0% 26 ~ 32V ± 1.0% 41 ~ 56V ± 1.0% 4.5 ~ 5.6V VOLTAGE TOLERANCE Note.3 ± 2.0% LINE REGULATION ± 0.5% ± 0.5% ± 0.5% ± 0.5% ± 0.5% ± 0.5% ± 0.5% ± 0.5% LOAD REGULATION ± 1.0% ± 1.0% ± 0.5% ± 0.5% ± 0.5% ± 0.5% ± 0.5% ± 0.5% SETUP, RISE TIME 200ms, 100ms at full load HOLD UP TIME (Typ.) 24ms at full load VOLTAGE RANGE 90 ~ 132VAC / 180 ~ 264VAC by switch FREQUENCY RANGE 47 ~ 63Hz 81% 83% 83% 84% EFFICIENCY (Typ.) 74% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 3.6A/115VAC 45A/115VAC LEAKAGE CURRENT OVERLOAD PROTECTION OVER VOLTAGE 79% 254 ~ 370VDC 80% 80% 2A/230VAC 45A/230VAC <3.5mA / 240VAC 105 ~ 135% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed 5.75 ~ 6.75V 9.4 ~ 10.9V 13.8 ~ 16.2V 15.5 ~ 18.2V 18 ~ 21V 27.6 ~ 32.4V 33.7 ~ 39.2V Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE ≧90℃(RTH3) detect on inside ambient temperature Protection type : Hiccup mode, recovers automatically after fault condition is removed WORKING TEMP. -10 ~ +50℃ (Refer to output load derating curve) WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC 57.6 ~ 67.2V 20 ~ 90% RH non-condensing -20 ~ +85℃, 10 ~ 95% RH ± 0.03%/℃ (0 ~ 50℃) 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes Design refer to UL1950 I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Design refer to FCC Part15 J Conduction Class A MTBF 271.9K hrs min. MIL-HDBK-217F (25℃) OTHERS DIMENSION PACKING NOTE 215*115*50mm (L*W*H) 0.93Kg; 12pcs/12Kg/0.92CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. File Name:S-201-SPEC 2007-10-25 S-201 200W Single Output Switching Power Supply Mechanical Specification Case No. 912E series Unit:mm 177.5 27.5 150 32.5 117.5 LED 95 115 50 5-M3 L=3mm 16 10 50.5 4-M4 L=5mm 32.5 9.5 9 8 7 6 5 4 3 2 1 8 135 +V ADJ. 15 215 150 32.5 Terminal Pin No. Assignment Pin No. 1 2 3 50 CL 25 12 max. Assignment AC/L AC/N FG Pin No. 4~6 7~9 Assignment DC OUTPUT -V DC OUTPUT +V 6-M4 L=6mm Block Diagram FAN ON/OFF CONTROL 230 115 RECTIFIERS & FILTER EMI FILTER I/P fosc : 25KHz FAN RECTIFIERS & FILTER POWER SWITCHING +V -V O.C.P. FG Derating Curve O.V.P. PWM CONTROL DRIVER Static Characteristics (24V) 32 300 Natural convection cooling(15~48V) 28 250 80 24 200 60 Natural convection cooling(5~12V) 20 150 16 100 12 50 8 25 OUTPUT VOLTAGE (V) LOAD (%) 100 40 20 -10 0 10 20 30 40 50 AMBIENT TEMPERATURE (℃) 60 (HORIZONTAL) 80 160 85 170 90 180 95 190 100 200 105 210 110 220 115 230 120 240 125 250 OUTPUT RIPPLE (mVp-p) Ta=25℃ 21CFM forced air cooling (L=10cm) 5~12V 130 260 INPUT VOLTAGE (VAC) 60Hz File Name:S-201-SPEC 2007-10-25