MERRIMAC PDML-30A-1100

0 POWER DIVIDERS / COMBINERS
PDML-30A Series
2 to 2000 MHz / 3-Way / In-Line Hi-Rel Package / Wide Bandwidth / Low Insertion Loss / SMA
PRINCIPAL SPECIFICATIONS
Model
Number
PDML-30A-100
Frequency
Freq.
Isolation, Insertion
Phase
Amplitude VSWR
Weight,
Range,
Perform.,
dB,
Loss, dB, Balance,
Bal., dB, (In/Output) oz.(g)
MHz
MHz
Min. Typ. Max. Typ. Max. Typ. Max. Typ. Max. Typ. Nom.
2 - 300
2 - 200
200 - 300
PDML-30A-500
50 - 1000 50 - 800
800 - 1000
PDML-30A-1100 100 - 2000 100 - 2000
28
20
20
20
18
32
25
25
25
20
1.0
1.2
1.5
2.2
2.2
0.8
1.0
0.8
1.5
1.5
3°
4°
8°
10°
10°
2°
3°
3°
5°
5°
0.3
0.4
0.5
0.7
0.7
0.15 1.35:1
0.2 1.60:1
0.3 1.5:1
0.5 1.7:1
0.5 1.5:1
1.2:1 0.9(25)
1.3:1
1.3:1 0.9(25)
1.4:1
1.3:1 0.9(25)
GENERAL SPECIFICATIONS
General Notes:
1. The PDML-30 series of In-Line 3-way Power Dividers/ Combiners
covers 2 to 2000 MHz using a high performance lumped element
design. All units are housed in a convenient, low profile, 0.4 inch (10
mm) SMA package.
Nominal Coupling:
Impedance:
CW Input Power:
-- 4.8 dB
50 Ω nom.
1W max.
(When used as divider with 1.2:1 VSWRout)
Internal Load Dissipation: 50 mW max.
Operating Temperature: -- 55° to +85°C
‘‘A’’Package Outline
NOTES:
1. Tolerance on 3 place decimals ±.020(.51) except as noted.
2. Dimensions in inches over millimeters.
22Feb96
For further information contact MERRIMAC / 41 Fairfield Pl., West Caldwell, NJ, 07006 / 973-575-1300 / FAX 973-575-0531