MIC 1.5KE300A

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS
1.5KE6.8 THRU 1.5KE440CA(GPP)
1.5KE6.8J THRU 1.5KE440CAJ(OPEN JUNCTION)
Breakdown Voltage
FEATURES
•
•
•
•
•
•
•
•
•
•
•
1500 Watts
DO-201(DO-27)
Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
Glass passivated junction or silastic guard junction
(open junction)
1500W peak pulse power capability with a 10/1000μs
Waveform, repetition rate (duty cycle): 0.05%
Excellent clamping capability
Low incremental surge resistance
Fast response time: typically less than 1.0ps from 0 Volts to
V(BR) for unidirectional and 5.0ns for bidirectional types
Devices with V(BR)≥10V, ID are typically less than 1.0μA
High temperature soldering guaranteed:
265℃/10 seconds, 0.375” (9.5mm) lead length,
51bs.(2.3kg) tension
1.0(25.4)
MIN
.220(5.6)
.197(5.0)
DIA
.375(9.5)
.335(8.5)
1.0(25.4)
MIN
.042(1.06)
.038(0.96)
DIA
Dimensions in inches and (millimeters)
MECHANICAL DATA
•
•
6.8 to 440 Volts
Peak Pulse Power
Cass: molded plastic body over passivated junction
Terminals: plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color bands denotes positive end (cathode) except for bidirectional
Mounting Position: any
Weight: 0.045 ounces, 1.2 grams
DEVICES FOR BIDRECTIONAL APPLICATIONS
•
•
For bidirectional use C or CA suffix for types 1.5KE6.8 thru types 1.5K440 (e.g. 1.5KE6.8C,
1.5KE440CA).Electrical Characteristics apply in both directions.
Suffix A denotes ±5% tolerance device, No suffix A denotes ±10% tolerance device
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
•
Ratings at 25℃ ambient temperature unless otherwise specified
Ratings
Peak Pulse power dissipation with a 10/1000μs waveform (NOTE1)
Peak Pulse current with a 10/1000μs waveform (NOTE1,FIG.1)
Steady Stage Power Dissipation at TL=75℃
Lead lengths 0.375”(9.5mm)(Note2)
Peak forward surge current, 8.3ms single half
sine-wave superimposed on rated load
(JEDEC Method) unidirectional only
Maximum instantaneous forward voltage at 100.0A for
unidirectional only (NOTE 3)
Operating Junction and Storage Temperature Range
Symbols
Value
Unit
PPPM
IPPM
Minimum 400
See Table 1
Watts
Amps
PM(AV)
5.0
Watts
IFSM
200.0
Amps
VF
TJ, TSTG
3.5/5.0
50 to +150
Volts
℃
Notes:
1.
2.
3.
Non-repetitive current pulse, per Fig.3 and derated above T A=25℃ per Fig.2
Mounted on copper pads ares of 0.8×0.8”(20×20mm) per Fig 5.
VF=3.5 V for devices of V (BR) ≤200V, and VF=5.0 Volts max. for devices of V(BR)＞200v
E-mail: [email protected]
Web Site: www.cnmic.com
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS
1.5KE6.8 THRU 1.5KE440CA(GPP)
1.5KE6.8J THRU 1.5KE440CAJ(OPEN JUNCTION)
Breakdown Voltage
Peak Pulse Power
6.8 to 440 Volts
1500 Watts
Electrical Characteristic at (TA =25℃ unless otherwise noted) TABLE1
Device
Type
1.5KE6.8/J
1.5KE6.8A/J
1.5KE7.5/J
1.5KE7.5A/J
1.5KE8.2/J
1.5KE8.2A/J
1.5KE9.1/J
1.5KE9.1A/J
1.5KE10/J
1.5KE10A/J
1.5KE11/J
1.5KE11A/J
1.5KE12/J
1.5KE12A/J
1.5KE13/J
1.5KE13A/J
1.5KE15/J
1.5KE15A/J
1.5KE16/J
1.5KE16A/J
1.5KE18/J
1.5KE18A/J
1.5KE20/J
1.5KE20A/J
1.5KE22/J
1.5KE22A/J
1.5KE24/J
1.5KE24A/J
1.5KE27/J
1.5KE27A/J
1.5KE30/J
1.5KE30A/J
1.5KE33/J
1.5KE33A/J
1.5KE36/J
1.5KE36A/J
1.5KE39/J
1.5KE39A/J
1.5KE43/J
1.5KE43A/J
1.5KE47/J
1.5KE47A/J
1.5KE51/J
1.5KE51A/J
1.5KE56/J
1.5KE56A/J
1.5KE62/J
1.5KE62A/J
MIN
MAX
Test
Current
at
IT
(mA)
6.12
6.45
6.75
7.13
7.38
7.79
8.19
7.65
9
9.5
9.9
10.5
10.8
11.4
11.7
12.4
13.5
14.3
14.4
15.2
16.2
17.1
18
19
19.8
20.9
21.6
22.8
24.3
25.7
27
28.5
29.7
31.4
32.4
34.2
35.1
37.1
38.7
40.9
42.3
44.7
45.7
48.5
50.4
53.2
55.8
58.9
7.48
7.14
8.25
7.88
9.02
8.61
10
9.55
11
10.5
12.1
11.6
13.2
12.6
14.3
13.7
16.5
15.8
17.6
16.8
19.8
18.9
22
21
24.2
23.1
26.4
25.2
29.7
28.4
33
31.5
36.3
34.7
39.6
37.8
42.9
41
47.3
45.2
51.7
49.4
56.1
43.6
61.6
58.8
68.8
65.1
10
10
10
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Breakdown Voltage
V(BR)(Volts) (Note 1)
E-mail: [email protected]
Stand-off
Voltage
VWM
(Volts)
5.5
5.8
6.05
6.4
6.63
7.02
7.37
7.78
8.1
8.55
8.92
9.4
9372
10.2
10.5
11.1
12.1
12.8
12.9
13.6
14.5
15.3
16.2
17.1
17.8
18.8
19.4
20.5
21.8
23.1
24.3
25.6
26.8
28.2
29.1
30.8
31.6
33.3
34.8
36.8
38.1
40.2
41.3
43.6
45.4
47.8
50.2
53
Maximum
Reverse
Leakage at
VWM ID (μA)
Maximum
Peak Pulse
Current
IPPM (Note 2)
(Amps)
Maximum
Clamping
Voltage at
IPPM
VC(Volts)
Maximum
Temperature
Coefficient
of V(BR)
(%/℃)
1000
1000
500
500
200
200
50
50
10
10
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
139
143
128
133
120
124
109
112
100
103
92.6
96.2
86.7
89.8
78.9
82.4
68.2
70.8
63.8
66.7
56.6
59.5
51.5
54.2
47
49
43.2
45.2
38.4
40
34.5
36.2
31.4
32.8
28.8
30.1
26.6
27.8
24.2
25.3
22.1
23.1
20.4
21.4
18.6
19.5
16.9
17.6
10.8
10.5
11.7
11.3
12.5
12.1
13.8
13.4
15
14.5
16.2
15.6
17.3
16.7
19
18.2
22
21.2
23.5
22.5
26.5
25.2
29.1
27.7
31.9
30.6
34.7
33.2
39.1
37.5
43.5
41.4
47.7
45.7
52
49.9
56.4
53.9
61.9
59.3
67.8
64.8
73.5
70.1
80.5
77
89
85
0.057
0.057
0.061
0.061
0.065
0.065
0.068
0.068
0.073
0.073
0.075
0.075
0.076
0.078
0.081
0.081
0.084
0.084
0.086
0.086
0.088
0.089
0.09
0.09
0.092
0.092
0.094
0.094
0.096
0.096
0.097
0.097
0.098
0.098
0.099
0.099
0.1
0.1
0.101
0.101
0.101
0.101
0.102
0.102
0.103
0.103
0.104
0.104
Web Site: www.cnmic.com
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS
1.5KE6.8 THRU 1.5KE440CA(GPP)
1.5KE6.8J THRU 1.5KE440CAJ(OPEN JUNCTION)
Breakdown Voltage
Peak Pulse Power
6.8 to 440 Volts
1500 Watts
Electrical Characteristic at (TA =25℃ unless otherwise noted) TABLE 1 (Cont’d)
Device
Type
1.5KE68/J
1.5KE68A/J
1.5KE75/J
1.5KE75A/J
1.5KE82/J
1.5KE82A/J
1.5KE91/J
1.5KE91A/J
1.5KE100/J
1.5KE100A/J
1.5KE110/J
1.5KE110A/J
1.5KE120/J
1.5KE120A/J
1.5KE130/J
1.5KE130A/J
1.5KE150/J
1.5KE150A/J
1.5KE160/J
1.5KE160A/J
1.5KE170/J
1.5KE170A/J
1.5KE180/J
1.5KE180A/J
1.5KE200/J
1.5KE200A/J
1.5KE220/J
1.5KE220A/J
1.5KE250/J
1.5KE250A/J
1.5KE300/J
1.5KE300A/J
1.5KE350/J
1.5KE350A/J
1.5KE400/J
1.5KE400A/J
1.5KE440/J
1.5KE440A/J
MIN
MAX
Test
Current
at
IT
(mA)
61.2
64.6
67.5
71.3
73.8
77.9
81.9
86.5
90
95
99
105
108
114
117
124
135
143
144
152
153
162
162
171
180
190
198
209
25
237
270
285
315
332
360
380
396
418
74.8
71.4
82.5
78.8
90.2
86.1
100
95.5
110
105
121
116
132
126
143
137
165
159
175
167
187
179
197
189
220
210
242
231
275
267
330
315
385
368
440
420
484
462
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Breakdown Voltage
V(BR)(Volts) (Note 1)
Stand-off
Voltage
VWM
(Volts)
Maximum
Reverse
Leakage at
VWM ID (μA)
(Note3)
Maximum
Peak Pulse
Current
IPPM (Note 2)
(Amps)
Maximum
Clamping
Voltage at
IPPM
VC(Volts)
Maximum
Temperature
Coefficient
of V(BR)
(%/℃)
55.1
58.1
60.7
64.1
66.4
70.1
73.7
77.8
81
85.5
89.2
94
97.2
102
105
111
121
128
130
136
138
145
146
154
162
171
175
185
202
214
243
245
284
300
324
342
356
376
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
15.3
16.3
13.9
14.6
12.7
13.3
11.5
12
10.4
10.9
9.5
9.9
8.7
9.1
8
8.4
7
7.2
6.5
6.8
6.1
6.4
5.8
6.1
5.2
5.5
4.4
4.6
4.2
4.4
3.5
3.6
3
3.1
2.6
2.7
2.4
2.5
98
92
105
103
118
113
131
125
144
137
158
152
173
165
187
179
215
207
230
219
244
234
258
246
287
274
344
328
360
344
430
414
504
482
574
548
631
602
0.104
0.104
0.105
0.105
0.105
0.105
0.106
0.106
0.106
0.106
0.107
0.107
0.107
0.107
0.107
0.107
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.108
0.11
0.11
0.11
0.11
0.11
0.11
0.11
0.11
0.11
0.11
Notes:/
(1)
(2)
(3)
(4)
V(BR) measured after IT applied for 300ms IT =square wave pulse or equivalent
Surge current waveform per Figure 3 and derate per Fig.2
All terms and symbols are consistent with ANSI/IEEE C62.35
For bidirectional type having VWM of 10 volts and less, the l D limit is doubled
E-mail: [email protected]
Web Site: www.cnmic.com
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS
1.5KE6.8 THRU 1.5KE440CA(GPP)
1.5KE6.8J THRU 1.5KE440CAJ(OPEN JUNCTION)
Breakdown Voltage
6.8 to 440 Volts
Peak Pulse Power
1500 Watts
RATING AND CHARACTERISTIC CURVES 1.5KE6.8/J THRU 1.5KE440CA/J
PEAK PULSE POWER (PP P ) OR CURRENT(IPP )
DERATING IN PERCENTAGE %
FIG.1- PEAK PULSE POWER RATING CURVE
PP PM, PEAK PULSE POWER, kW
100
Non-Repetitive
Pulse Waveform
Shown in Figure 3
TA=25 ℃
10
1.0
0.1
0.1 μs
10 μs
1.0μs
100μs
10ms
1.0ms
t d ,PULSE WIDTH, SEC
FIG.2- PULSE DERATING CURVE
100
75
50
25
0
0
25
50
75
125
100
150
200
175
TA , AMBIENT TEMPERATURE (℃)
FIG.3- PULSE WAVEFORM
FIG.4- TYPICAL JUNCTION CAPACITANCE
10,000
Pulse Width (td)is Defined
as the Point Where the Peak
Current Decays to 50% of lpp
tf=10use
Peak Value
lppm
100
CJ, CAPACITANCE, pF
IPP M, PEAK PULSE CURRENT ,%
150
Half Value-lpp
2
50
0
10/1000usec Waveform
as Defined by R.E.A.
VR =0
1,000
TJ=25 ℃
f = 1.0MHz
Vsig = 50mVp-p
100
VR =RATED
Stand-Off
Voltage
10
td
0
UNIDIRECTIONAL
BIDIRECTIONAL
10
5
3.0
2.0
1.0
4.0
FIG.5- STEADY STATE POWER DERATING CURVE
60 Hz
Resistive or induction load
L = 0.375" (9.5mm)
LEAD LENGTHS
3.75
2.50
0.8×0.8×0.040"
(20×20×1mm)
COPPER HEAT SINKS
1.25
0
0
25
50
75
100
125
150
175
200
TL ,LEAD TEMPERATURE ℃
E-mail: [email protected]
PEAK PEAK FORWARD SURGE CURRENT,
AMPERES
PM(A V), STEADY STATE POWER DISSIPATION,
WATTS
t, TIME, ms
5.00
100
V(BR) ,BREALDOWN VOLTAGE,
500
VOLTS
FIG.6 - MAXIMUM NON-REPETITIVE PEAK FORWARD
SURGE CURRENT UNIDIRECTIONAL ONLY
200
TJ =TJ max
8.3ms Single Half Since-Wave
JEDEC Method
100
10
1
10
NUMBER OF CYCLES AT 60 Hz
Web Site: www.cnmic.com
100
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS
1.5KE6.8 THRU 1.5KE440CA(GPP)
1.5KE6.8J THRU 1.5KE440CAJ(OPEN JUNCTION)
Breakdown Voltage
6.8 to 440 Volts
Peak Pulse Power
1500 Watts
RATING AND CHARACTERISTIC CURVES 1.5KE6.8/J THRU 1.5KE440CA/J
FIG.8- INCREMENTAL CLAMPING VOLTAGE CURVE
UNIDIRECTIONAL
FIG.7- INCREMENTAL CLAMPING VOLTAGE CURVE
UNIDIRECTIONAL
100
100
WAVEFORM
8×20 IMPULSE
WAVEFORM
10×1000 IMPULSE
1.5KE200
INCREMENTAL CLAMPING VOLTAGE
20
1.5KE100
10
1.5KE75
1.5KE39
2.0
1.5KE33
1.0
1.5KE6.8
1.5KE9.1
1.5KE130
20
1.5KE75
10
1.5KE39
2.0
1.5KE33
1.0
1.5KE6.8
1.5KE9.1
△VC,
1.5KE18
1.5KE12
0.2
0.1
0.2
0.5
1
2.0
10
20
0.1
50
0.5
2.0
1
IPP, PEAK PULSE CURRENT, AMPS
10
50
IPP, PEAK PULSE CURRENT, AMPS
FIG.9- INCREMENTAL CLAMPING VOLTAGE CURVE
BIDIRECTIONAL
FIG.10- INCREMENTAL CLAMPING VOLTAGE CURVE
BIDIRECTIONAL
100
100
WAVEFORM
10×100 IMPULSE
WAVEFORM
8×20 IMPULSE
△ Vc = Vc *V (BR)
INCREMENTAL CLAMPING VOLTAGE
△ Vc = Vc *V (BR)
1.5KE200C
20
10
1.5KE75C
1.5KE39C
1.5KE30C
2.0
1.5KE15C
1.5KE11C
1.0
1.5KE200C
20
1.5KE75C
10
1.5KE39C
1.5KE30C
1.5KE15C
2.0
1.5KE11C
1.0
1.5KE7.5C
△VC,
1.5KE7.5C
△VC,
INCREMENTAL CLAMPING VOLTAGE
1.5KE200
△ Vc = Vc *V (BR)
1.5KE130
△VC,
INCREMENTAL CLAMPING VOLTAGE
△ Vc = Vc *V (BR)
0.2
0.1
0.2
0.5
1
2.0
10
20
IPP, PEAK PULSE CURRENT, AMPS
E-mail: [email protected]
50
0.1
0.5
2.0
1
10
20
IPP, PEAK PULSE CURRENT, AMPS
Web Site: www.cnmic.com
50
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS
1.5KE6.8 THRU 1.5KE440CA(GPP)
1.5KE6.8J THRU 1.5KE440CAJ(OPEN JUNCTION)
Breakdown Voltage
6.8 to 440 Volts
Peak Pulse Power
1500 Watts
RATING AND CHARACTERISTIC CURVES 1.5KE6.8/J THRU 1.5KE440CA/J
FIG.12- BREAKDOWN VOLTAGE
TEMPERATURE COEFFICIENT CURVE
θv, TEMPERATURE COEFFICIENT- mV℃
FIG.11- INSTANTANEOUS FORWARD
VOLTAGE CHARAVTERISTICS CURVE
FORWARD CURRENT
100
10
PULSE WIDTH=300μs
1% DUTY CYCLE
TJ=25 ℃
1
0.1
1000
100
UNIDIRECTIONAL
10
1
5
10
20
0.4
0.8
1.2
1.6
2.0
INSTANTANEOUS FORWARD CURRENT AMPERES
E-mail: [email protected]
50
100
200
V(BR) ,BREAKDOWN VOLTAGE, VOLTS
UNIDIRECTIONAL (ONLY )
0
BIDIRECTIONAL
Web Site: www.cnmic.com
500