GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER 2W005G THRU 2W10G FEATURES • • • • • • • • • Plastic package has underwriters laboratory Flammability classification 94V-0 This series is UL recognized under component index, file number E127707 Glass passivated ship junction High case dielectric strength Tyoical IR less than 0.5μA High surge current capability Ideal for printed circuit boards High temperature soldering guaranteed 260℃/10 seconds, 0.375” (9.5mm) lead length at 5 lbs (2.3kg) tension MECHANICAL DATA • • • • Case: Epoxy, Molded Plastic body over passivated junctions Terminal: Plated leads solderable per MIL-STD-750 method 2026 Mounting position: Any Weight: 0.04 ounce, 1.1 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • Ratings at 25℃ ambient temperature unless otherwise specified SYMBOLS 2W005G 2W01G Maximum Repetitive Peak Reverse Voltage VRRM 50 100 Maximum RMS Voltage VRMS 35 70 Maximum DC Blocking Voltage VDC 50 100 Maximum Average Forward Rectified Current at 0.375’ (9.5mm) lead length (Note 1) Peak Forward Surge Current 8.3mS single half sine-wave superimposed on rated load (JEDEC method) Rating for Fusing (t＜8.3ms) Maximum Instantaneous Forward Voltage Drop Per element at 1.5A DC Maximum Average Reverse Current at rated DC Blocking Voltage TA = 25℃ TA = 125℃ 2W02G 2W04G 2W06G 2W08G 2W10G 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 UNIT Volts Volts Volts IF(AV) 2.0 Amps IFSM 60 Amps I2 t 15 A2s VF 1.1 Volts IR 5.0 500.0 µA µA pF Cj 40 R 15 Typical Thermal Resistance θJL per leg (NOTE 1) RθJA 40 Operating Temperature Range TJ (-55 to +150) Storage Temperature Range TSTG (-55 to +150) Notes: 1. Thermal resistance from junction to lead at 0.375”(9.5mm) lead length P.C.B. mounting. Typical Junction Capacitance per leg at 4.0V, 1MHz E-mail: [email protected] Web Site: www.cnmic.com 20 ℃/W ℃ GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER 2W005G THRU 2W10G 2.4 FIG. 1 - DERATING CURVE OUTPUT RECTIFIED CURRENT PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT, CURRENT,AMPETES RATINGS AND CHARACTERISTICS CURVES 2W005G THRU 2W10G 60 Hz RESISTIVE OR INDUCTIVE LOAD 2.0 P.C.B. 1.6 COPPER PADS 0.22×0.22" (5.5×5.5mm ) 1.2 0.8 CAPACITIVE LOADS 5.0 Ipk/I(AV)10 (PER LEG) 20 0.4 0 0.375" (9.5mm) 0 50 25 75 100 125 150 FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG 60 T A=25℃ SINGLE SINE-WAVE (JEDEC Method) 50 40 30 20 10 0 1.0 CYCLE 1 10 AMBIENT TEMPERATURE, ℃ FIG. 3 - TYPICAL FORWARD CHARACTERISTICS PER LEG FIG. 4 - TYPICAL REVERSE CHARACTERISTICS PER LEG 20 TJ =125℃ INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES 100 TJ =25℃ PULSE WIDTH=300 μs 1% DUTY CYCLE 10 1 0.1 10 TJ =100℃ 1 0.1 T A=25℃ 0.01 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 JUNCTION CAPACITANCE, pF TJ =25℃ f=1.0 MHz Vsig=50mVp-p 10 0.1 1 10 20 40 60 80 100 FIG .6 - TYPICAL TRANSIENT THERMAL IMPEDANCE 100 TRANSIENT THERMAL IMPEDANCE, ℃/W FIG. 5 - TYPICAL JUNCTION CAPACITANCE PER LEG 100 0 PERCENT OF RATED PEAK REVERSE VOLTAGE, % INSTANTANEOUS FORWARD VOLTAGE, VOLTS 1 100 NUMBER OF CYCLES AT 60 Hz 100 10 1 0.1 0.01 E-mail: [email protected] 0.1 1 t, HEATING TIME, sec. REVERSE VOLTAGE,VOLTS Web Site: www.cnmic.com 10 100