GLASS PASSIVATED RECTIFIER 8A05 THRU 8A10 VOLTAGE RANGE 50 to 1000 Volts CURRENT 8.0 Ampere TO-220AC FEATURES • • • • • • • • Glass passivated chip junction Low power loss, high efficiency Low Leakage High current capacity, high surge capacity High temperature soldering guaranteed 200℃/10 second,0.16”(4.06mm)lead length from case Also available in reverse polarity, add the “R” Suffix , i.e. 8A05R Also available in isolated package under part number 8AF05 MECHANICAL DATA • • • • • • Case: Transfer molded plastic Epoxy: UL94V-0 rate flame retardant Polarity: Marked on package Lead: Plated axial lead, solderable per MIL-STD-202E method 208C Mounting position: Any Weight: 0.064ounce, 1.81 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SYMBOLS 8A05 8A1 Maximum Repetitive Peak Reverse Voltage VRRM 50 100 Maximum RMS Voltage VRMS 35 70 Maximum DC Blocking Voltage VDC 50 100 Maximum Average Forward Rectified Current TA Tc=100℃ Peak Forward Surge Current 8.3mS single half sine wave superimposed on rated load (JEDEC method) 8A2 200 140 200 8A4 400 280 400 8A6 600 420 600 8A8 800 560 800 8A10 1000 700 1000 UNIT Volts Volts Volts I(AV) 8.0 Amps IFSM 175 Amps Maximum Instantaneous Forward Voltage at 8.0A VF IR 1.1 1.0 200 Volts Maximum DC Reverse Current at rated TA = 25℃ DC Blocking Voltage per element T = 125℃ CJ 55 pF RθJC TJ TSTG 2.5 (-55 to +150) (-55 to +150) ℃/W A Typical Junction Capacitance (Measured at 1.0MHz and applied reverse voltage of 4.0V) Typical Thermal Resistance (NOTE 1) Operating Temperature Range Storage Temperature Range Notes: 1. Unit mounted on heatsink E-mail: [email protected] Web Site: www.cnmic.com µA ℃ ℃ GLASS PASSIVATED RECTIFIER 8A05 THRU 8A10 VOLTAGE RANGE 50 to 1000 Volts CURRENT 8.0 Ampere RATING AND CHRACTERISTIC CURVES 8A05 THRU 8A10 FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 2.0 1.0 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375″(9.5mm) Lead Length 200 CURRENT, (A) PEAK FORWARD SURGE AVERAGE FORWARD CURRENT, (A) 3.0 8.3ms Single Half Sine-Wave (JEDEC Method) T= Tjmax 100 1 Cycle 0 0 25 50 100 75 125 175 150 0 1 2 AMBIENT TEMPERATURE, (° C) 4 6 8 10 40 20 60 100 NUMBER OF CYCLES AT 60 Hz FIG.4-TYPICAL REVERSE CHARACTERISTICS FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, (μA) 100 10 (A) INSTANTANEOUS FORWARD CURRENT, 1000 1.0 TJ =25° C Pulse Width=300us 1% Duty Cycle 0.1 0.4 0.8 1.6 1.2 INSTANTANEOUS FORWARD VOLTAGE,(V) 100 TJ=125° C 10 1.0 TJ=25° C 0.1 0 20 40 60 80 100 FIG.5-TYPICAL JUNCTION CAPACITANCE PERCENT OF RATED PEAK 100 JUNCTION CAPACITANCE,(pF) REVERSE VOLTAGE,(%) 10 TJ =25° C f=1MHz Vsig=50mVp-p 1 0.1 1.0 10 100 REVERSE VOLTAGE,(V) E-mail: [email protected] Web Site: www.cnmic.com 120 140