MIC JSOZA801

JUMBO SOZA CELL
JSOZA801 THRU JSOZA806
VOLTAGE RANGE
100 to 600 Volts
CURRENT
80.0 Amperes
TECHNICAL SPECIFICATION:
FEATURES
•
•
•
•
.327(8.30)
.320(8.15)
Low Leakage
Low forward voltage drop
High current capability
High forward surge current capacity
DIA
MECHANICAL DATA
•
•
•
•
•
0.086(2.20)
0.078(2.0)
Copper slug
Technology: cell with vacuum soldered
Polarity: red dots denotes cathode end
Mounting Position: Any
Weight: 0.0275 ounces, 0.78 grams
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
•
•
•
Ratings at 25℃ ambient temperature unless otherwise specified
Single Phase, half wave, 60HZ, resistive or inductive load
For capacitive load derate current by 20%
SYMBOLS
JSOZA801
Maximum Repetitive Peak Reverse Voltage
VRRM
100
200
300
400
600
Volts
Maximum RMS Voltage
VRMS
70
140
210
280
420
Volts
Maximum DC Blocking Voltage
VDC
100
200
300
400
600
Volts
Maximum Average Forward Rectified Current,
JSOZA802
JSOZA803
JSOZA804
JSOZA806
UNIT
IO
80.0
Amps
IFSM
700
Amps
VF
1.02
Volts
At Tc=110℃
Peak Forward Surge Current
3.3mS single half sine wave superimposed on
Rated load (JEDEC method)
Maximum instantaneous Forward Voltage at 100A
Maximum DC Reverse Current at Rated TA=25℃
DC Blocking Voltage per element
IR
TA=100℃
Typical Thermal Resistance
Operating and Storage Temperature Range
5.0
RθJC
0.8
℃/W
TJ,TSTG
(-65 to +175)
℃
Notes:
1.
UA
400
Enough heatsink must be considered in application.
E-mail: [email protected]
Web Site: www.cnmic.com
JUMBO SOZA CELL
JSOZA801 THRU JSOZA806
VOLTAGE RANGE
100 to 600 Volts
CURRENT
80.0 Amperes
RATINGS AND CHARACTERISTIC CURVES JSOZA801 THRU JSOZA806
F1G.2 MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
80
700
70
600
PEAK FORWARD SURGE
CURRENT,(A)
AVERAGE FORWARD CURRENT,
(A)
F1G.1 TYPICAL FORWARD CURRENT
DERATING GURVE
60
50
40
30
Single Phase
20
8.3ms Single Half Sine-Wave
500
(JEDEC Method) Tj=Tj max
400
300
200
100
1 Cycle
Half Wave 60Hz
Resistive or Inductive Load
10
1
2
4
6
8 10
20
40
60 80 100
0.375″(9.5mm) Lead Length
NUMBER OF CYCLES AT 60 Hz
0
0
25
50
75
110
100
125
150
175
CASE TEMPERATURE, (℃)
F1G.3 TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
F1G.4 FORWARD ROWER DISSIPATION
AVERAGE POWER DISSIPATION
(W)
INSTANTANEOUS FORWARD CURRENT,
(A)
1000
100
10
T1=25℃
PULSE WIDTH=300μS
1%DUTY CYCLE
70
SQUARE WAVE
DC
40
0
0
1.0
0.1
0.6
100
20
40
60
80
AVERAGE FORWARD CURRENT, (A)
0.8
1.0
1.2
1.4
1.6
1.8
2.0
INSTANTANEOUS FORWARD VOLTAGE,(V)
E-mail: [email protected]
Web Site: www.cnmic.com
100