MIC KBPC802

MASTER INSTRUMENT CORPORATION
SINGLE-PHASE BRIDGE RECTIFIER
KBPC8005 THRU KBPC810
BR805 THRU BR810
VOLTAGE RANGE
CURRENT
FEATURES
l Low cost
l This series is UL recognized under component
index, file number E127707
l High forward surge current capability
l Ideal for printed circuit board
l High isolation voltage from case to leads
l High temperature soldering guaranteed:
260 oC/10 second, at 5 lbs. (2.3kg) tension.
50 to 1000 Volts
8.0 Amperes
0.52( 13.2)
0.48( 12.2)
°
0.07( 1.8) x45
0.16( 4.1)
0.14( 3.6) DIA
+
AC
0.52( 13.2)
0.48( 12.2)
AC
0.77( 19.6)
0.73( 18.5)
-
0.77( 19.6)
0.73( 18.5)
0.30( 7.6)
0.25( 6.4)
MECHANICAL DATA
l Case: Molded plastic body
l Terminal: Lead solderable per MIL-STD-202E
method 208C.
l Polarity: Polarity symbols molded on case
l Mounting: Thru hole for #6 screw, 5.0 in.-lbs torque max.
l Weight:0. 20ounce, 5.62 grams
0.85( 21.6) MIN
0.75( 19.0) MIN
0.08( 2.0) MIN
0.052( 1.3) DIA.
0.048( 1.2) TYP.
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load derate current by 20%.
SYMBOLS
BR805
BR81
BR82
BR84
BR86
KBPC8005 KBPC801 KBPC802 KBPC804 KBPC806
BR88
BR810
KBPC808 KBPC810
UNITS
Maximum Repetitive Peak Reverse Voltage
VRRM
50
100
200
400
600
800
1000
Volts
Maximum RMS Voltage
VRMS
35
70
140
280
420
560
700
Volts
Maximum DC Blocking Voltage
VDC
50
100
200
400
600
800
1000
Volts
TC=50℃(Note1)
Maximum Average Forward
Rectified Output Current, at TC=100℃(Note1)
8.0
I(AV)
6.0
TA=50℃(Note2)
Peak Forward Surge Current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
Amps
6.0
IFSM
125
Amps
Rating for Fusing(t<8.3ms)
Maximum Instantaneous Forward Voltage at 4.0A
Maximum DC Reverse Current at rated TA=25 oC
DC blocking voltage
TA=150o C
I2T
VF
64
1.1
5.0
1.0
A2S
Volts
µAmps
mAmps
Isolation Voltage from case to leads
VISO
2500
VAC
RθJC
6.0
℃/W
TJ
-55 to +150
℃
TSTG
-55 to +150
℃
Typical Thermal Resistance (Note 1)
Operating Temperature Range
Storage Temperature Range
IR
NOTES:
1.
Unit mounted on 8.7”×8.7”×0.24” thick (22×22×0.6 cm) Al. plate.
2.
Unit mounted on P.C.B at 0.375” (9.5mm) lead length with 0.47”×0.47” (12×12mm) copper pads.
E-mail: [email protected]
Web Site: www.cnmic.com
1/2
MASTER INSTRUMENT CORPORATION
SINGLE-PHASE BRIDGE RECTIFIER
KBPC8005 THRU KBPC810
BR805 THRU BR810
E-mail: [email protected]
VOLTAGE RANGE
CURRENT
50 to 1000 Volts
8.0 Amperes
Web Site: www.cnmic.com
2/2